Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation

Seyyedreza HOSSEİNİ, (Tabriz University, Reactor and Catalyst Research Laboratory, Department of Chemical and Petroleum Engineering, Tabriz, Iran)
Mahsa BAHRAMGOUR, (Tabriz University, Reactor and Catalyst Research Laboratory, Department of Chemical and Petroleum Engineering, Tabriz, Iran)
Aligholi NİAİE, (Tabriz University, Reactor and Catalyst Research Laboratory, Department of Chemical and Petroleum Engineering, Tabriz, Iran)
Nagihan DELİBAŞ (Sakarya Üniversitesi, Fen-Edebiyat Fakültesi, Fizik Bölümü, Sakarya, Türkiye)
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi
22 2
Yıl: 2021 Cilt: 25 Sayı: 5 Sayfa Aralığı: 1168 - 1179 Metin Dili: İngilizce DOI: 10.16984/saufenbilder.947735 İndeks Tarihi: 29-07-2022

Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation

Öz:
Recently, renewable energy sources such as solar energy have gained much attention forelectricity generation because of their easy access and infinite resources. Solar cells are a goodchoice for this goal. Among the various solar cells that have already been studied, perovskitesolar cells (PSCs) have recently become an interesting issue for researchers due to theirtremendous improvement in system performance and efficiency. This type of solar cell isdivided into several layers, each of which has its role in the structure of the cell. “FrontContact/Electron transporting material/Absorber (perovskite)/Hole transporting layer/BackContact”. The overall structure of these cells has shown a maximum efficiency of about 22%which is good efficiency for solar cells. However, this type of solar cell suffers from stabilityproblems, especially at the junction point between the hole transporting layer (HTM) and theperovskite (absorber) layer, despite its cost-effectiveness advantages. To solve this problem,recent studies have been transferred to a study called interface engineering. In this study, thementioned interfaces are modified by some materials that have regular and stable structuressuch as polymers. Many polymeric modifiers have been studied in recent years. Among them,P3HT (Poly(3-hexylthiophene-2,5-diyl)) has provided the best results. In this paper, first, theeffect of different layer properties such as their thickness and charge carrier density wereinvestigated and optimal parameters were obtained for each one using SCAPS-1D (Solar CellCapacitance Simulator) software. Then we simulated the structure of a perovskite solar cellusing a polymeric modifier in its structure. The results showed that by adding an ultrathinpolymeric film as an interface between HTM and perovskite, the performance of the device wasimproved and its efficiency was enhanced. The final efficiency of the device with the optimalparameters was obtained about 26.5%.
Anahtar Kelime: modifiers efficiency solar cells perovskite interface

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • [1] Hussain I, Tran HP, Jaksik J, Moore J, Islam N, Uddin MJ. “Functional materials, device architecture, and flexibility of perovskite solar cell” Emergent Materials, vol. 1, no. 3, pp.54-133, 2018.
  • [2] Kojima A, Teshima K, Shirai Y, Miyasaka T. “Organometal halide perovskites as visible-light sensitizers for photovoltaic cells” Journal of the American Chemical Society, vol. 131, no. 17, pp.1-6050, 2009.
  • [3] Kim HS, Lee CR, Im JH, Lee KB, Moehl T, Marchioro A, Moon SJ, Humphry-Baker R, Yum JH, Moser JE, Grätzel M. “Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%” Scientific reports, vol. 2, no. 1, pp.1-7, 2012.
  • [4] Cai Y, Zhang Z, Zhou Y, Liu H, Qin Q, Lu X, Gao X, Shui L, Wu S, Liu J. “Enhancing the efficiency of low-temperature planar perovskite solar cells by modifying the interface between perovskite and hole transport layer with polymers” Electrochimica Acta, vol. 261, pp.53-445, 2018.
  • [5] Du Y, Xin C, Huang W, Shi B, Ding Y, Wei C, Zhao Y, Li Y, Zhang X. “Polymeric surface modification of NiOx-based inverted planar perovskite solar cells with enhanced performance”, ACS Sustainable Chemistry & Engineering, vol. 6, no. 12, pp.12-16806, 2018.
  • [6] Huang LB, Su PY, Liu JM, Huang JF, Chen YF, Qin S, Guo J, Xu YW, Su CY. “Interface engineering of perovskite solar cells with multifunctional polymer interlayer toward improved performance and stability”, Journal of Power Sources, vol. 378, pp.90-483, 2018.
  • [7] Burgelman M, Nollet P, Degrave S. “Modelling polycrystalline semiconductor solar cells. Thin solid films” vol. 361, pp.32-527, 2000.
  • [8] Karimi E, Ghorashi SM. “Investigation of the influence of different hole-transporting materials on the performance of perovskite solar cells”, Optik, vol. 130, pp.8-650, 2017.
  • [9] Karimi E, Ghorashi SM. “Simulation of perovskite solar cell with P3HT holetransporting materials”, Journal of Nanophotonics, vol. 11, no. 3, pp. 032510, 2017.
  • [10] Kim E, Bhattacharya I. “Material selection method for a perovskite solar cell design based on the genetic algorithm”. In2020 47th IEEE Photovoltaic Specialists Conference (PVSC), pp. 2631-2634, 2020.
  • [11] Zhang F, Shi W, Luo J, Pellet N, Yi C, Li X, Zhao X, Dennis TJ, Li X, Wang S, Xiao Y. “Isomer‐pure bis‐PCBM‐assisted crystal engineering of perovskite solar cells showing excellent efficiency and stability”, Advanced Materials, vol. 29, no. 17, pp. 1606806, May 2017.
  • [12] Kapur VK, Basol BM, Tseng ES. “Low cost methods for the production of semiconductor films for CuInSe2/CdS solar cells”, Solar cells, vol. 21, no. 1-4, pp.65- 72, June 1987.
  • [13] Kapur VK, Bansal A, Le P, Asensio OI. “Non-vacuum processing of CuIn1− xGaxSe2 solar cells on rigid and flexible substrates using nanoparticle precursor inks”. Thin solid films, vol. 431, pp.7-53, May 2003.
  • [14] Dhere NG, Ghongadi SR, Pandit MB, Jahagirdar AH, Scheiman D. “CIGS2 thin‐ film solar cells on flexible foils for space power”, Progress in Photovoltaics: Research and Applications, vol. 10, no. 6, pp.16-407, September 2002.
APA Hosseini S, bahramgour m, Niaei A, DELIBAS N (2021). Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. , 1168 - 1179. 10.16984/saufenbilder.947735
Chicago Hosseini SeyyedReza,bahramgour mahsa,Niaei Aligholi,DELIBAS NAGIHAN Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. (2021): 1168 - 1179. 10.16984/saufenbilder.947735
MLA Hosseini SeyyedReza,bahramgour mahsa,Niaei Aligholi,DELIBAS NAGIHAN Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. , 2021, ss.1168 - 1179. 10.16984/saufenbilder.947735
AMA Hosseini S,bahramgour m,Niaei A,DELIBAS N Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. . 2021; 1168 - 1179. 10.16984/saufenbilder.947735
Vancouver Hosseini S,bahramgour m,Niaei A,DELIBAS N Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. . 2021; 1168 - 1179. 10.16984/saufenbilder.947735
IEEE Hosseini S,bahramgour m,Niaei A,DELIBAS N "Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation." , ss.1168 - 1179, 2021. 10.16984/saufenbilder.947735
ISNAD Hosseini, SeyyedReza vd. "Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation". (2021), 1168-1179. https://doi.org/10.16984/saufenbilder.947735
APA Hosseini S, bahramgour m, Niaei A, DELIBAS N (2021). Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 25(5), 1168 - 1179. 10.16984/saufenbilder.947735
Chicago Hosseini SeyyedReza,bahramgour mahsa,Niaei Aligholi,DELIBAS NAGIHAN Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi 25, no.5 (2021): 1168 - 1179. 10.16984/saufenbilder.947735
MLA Hosseini SeyyedReza,bahramgour mahsa,Niaei Aligholi,DELIBAS NAGIHAN Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.25, no.5, 2021, ss.1168 - 1179. 10.16984/saufenbilder.947735
AMA Hosseini S,bahramgour m,Niaei A,DELIBAS N Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 2021; 25(5): 1168 - 1179. 10.16984/saufenbilder.947735
Vancouver Hosseini S,bahramgour m,Niaei A,DELIBAS N Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 2021; 25(5): 1168 - 1179. 10.16984/saufenbilder.947735
IEEE Hosseini S,bahramgour m,Niaei A,DELIBAS N "Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation." Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 25, ss.1168 - 1179, 2021. 10.16984/saufenbilder.947735
ISNAD Hosseini, SeyyedReza vd. "Interface Modification by Using an Ultrathin P3HT Layer in a Custom Perovskite Solar Cell Through SCAPS-1D Simulation". Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi 25/5 (2021), 1168-1179. https://doi.org/10.16984/saufenbilder.947735
Sayfa Oluşturulma Tarihi
03-05-2024 11:25

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları