Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard
Yıl: 2019 Cilt: 19 Sayı: 2 Sayfa Aralığı: 259 - 265 Metin Dili: İngilizce DOI: 10.17475/kastorman.626376 İndeks Tarihi: 21-05-2020
Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard
Öz: Aim of study: The aim of this study was to investigate the effect of countersink along with some other factors affecting screw driving torques in joints made of medium density fiberboard (MDF). There is limitedresearch has been done in the field of screw driving torques in wood based composites. In all of these studies, the specimen consisted of a single wood-based composite material and metal plate which was used for the consistency of the screw driving data. However, in this study, the screw driving torques were obtained by the specimens consisted of two MDF testing blocks jointed by a screw.Material and Method: In general, there were two main screw driving torques; seating torque (SET) and stripping torque (STT). The MDF testing blocks had dimension of 150 mm long × 75 mm wide and two different thicknesses were used. For upper testing block, 8-mm-thick MDF and for lower testing block, 18- mm-thick MDF were used. Torques measurements were obtained by an adjustable torque screwdriver. Factors were embedded screw orientation (face-to-face and face-to-side), pilot-hole diameter (2.5 and 3.0mm), pilot-hole depth (12 and 16 mm) and countersink type (with and without countersink).Main results: The results of statistical analysis indicated that the four-way interaction among the embedded screw orientation, screw length, countersink type and pilot-hole diameter was significant on the mean SET and STT in the MDF joints.Highlights: This study will help MDF manufacturers to understand the screw performance of their products in terms of screw driving torques
Anahtar Kelime: Konular:
Orta Yoğunluklu Lif Levhalarda Havşa Deliğinin Vidalama Torkları Üzerine Etkisi
Öz: Çalışmanın amacı: Bu çalışmada, orta yoğunluklu lif levhalarda (MDF) havşa deliği ve bazı faktörlerin vidalama tork değerleri üzerine etkileri araştırılmıştır. Bu konu ile ilgili yapılan önceki çalışmalarda, ahşap esaslı malzemelerde vidalama torklarının ölçülebilmesi için metal bir plaka ile kullanılmıştır. Ancak, bu çalışmada vidalama tork değerleri direk olarak iki MDF numunesi alından ve yüzeyden olmak üzere birleştirilerek elde edilmiştir. Materyal ve Yöntem: Vidalama torkları incelendiğinde iki vidalama torku ön plana çıkmaktadır. Birisi vidanın malzemeye tam olarak oturduğu anda ki vidalama torku (SET) diğeri ise vidanın malzeme içerisinde boşta dönmesinden hemen önce ki maksimum tork (STT) olarak adlandırılır. MDF deney örnekleri 150 mm uzunluğunda ve 75 mm eninde kesilmiştir. 8 ve 18 mm olarak iki farklı kalınlık kullanılmıştır. Vidalama torkları ayarlanabilir tork anahtarı ile ölçülmüştür. Bu araştırmada ki faktörler şu şekildedir; vidalama yönü (malzemenin yüz ve alın kısmı), kılavuz deliği çapı (2.5 ve 3.0 mm), kılavuz deliği derinliği (12 ve 16 mm) ve havşa deliğinin durumu (havşalı ve havşasız). Sonuçlar: İstatistiksel analiz sonuçlar, vidalama yönü, kılavuz deliği çapı ve derinliği ve havşa deliğinin durumu arasında ki dörtlü etkileşimin anlamlı olduğunu göstermiştir. Önemli Vurgular: Bu çalışma, MDF panel üreticilerinin malzemelerinde ki vidalama performansları hakkında önemli bilgiler vermektedir.
Anahtar Kelime: Konular:
Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- ASTM D1761-06 (2010). Standard test method for mechanical fasteners in wood. American Society for Testing and Materials, West Conshohocken, PA.
- ASTM D 4442-92 (2010). Standard test methods for direct moisture content measurement of wood and wood-base materials. American Society for Testing and materials, West Conshohocken, PA.
- ASTM D1037-06 (2010). Standard test methods for evaluating properties of wood-base fiber and particle panel materials. American Society for Testing and materials, West Conshohocken, PA.
- Carroll, M. N. (1972). Measuring screw withdrawal with a torque wrench. Forest Products Journal, 22(8), 42-46.
- Didriksson, E. I. E., Nyren, J. O. & Back, E. L. (1974). The splitting of wood-base building boards due to edge screwing. Forest Products Journal, 24(7), 35-39.
- Kuang, F., Xing, Y., Wu, Z. & Zhang, J. (2017). Characteristics of screwdriving torques in wood-plastic composites. Wood and Fiber Science, 49(2), 206-218.
- Robert, A.M. (2012). Plastic part design for injection molding: An introduction. Hanser Publications, Cincinnati, Ohio. pp. 381-384.
- SAS 9.4. (2014). SAS users’ guide. SAS Institute, Cary, NC.
- Tor, O., Yu, X. & Zhang, J. (2015). Characteristics of torques for driving screws into wood based composites. Wood and Fiber Science, 47(1), 2- 16.
- Tor, O. (2019). Effects of pilot hole diameter on screw-driving torques in medium density fiberboard. CERNE, 25(1), 54-59.
- Yu, X., Tor, O., Quin, F., Seale, D. & Zhang, J. (2015). Screw-driving torques in particleboards. Wood and Fiber Science, 47(2), 17-30.
| APA | TOR Ö (2019). Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. , 259 - 265. 10.17475/kastorman.626376 |
| Chicago | TOR ÖNDER Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. (2019): 259 - 265. 10.17475/kastorman.626376 |
| MLA | TOR ÖNDER Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. , 2019, ss.259 - 265. 10.17475/kastorman.626376 |
| AMA | TOR Ö Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. . 2019; 259 - 265. 10.17475/kastorman.626376 |
| Vancouver | TOR Ö Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. . 2019; 259 - 265. 10.17475/kastorman.626376 |
| IEEE | TOR Ö "Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard." , ss.259 - 265, 2019. 10.17475/kastorman.626376 |
| ISNAD | TOR, ÖNDER. "Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard". (2019), 259-265. https://doi.org/10.17475/kastorman.626376 |
| APA | TOR Ö (2019). Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. Kastamonu Üniversitesi Orman Fakültesi Dergisi, 19(2), 259 - 265. 10.17475/kastorman.626376 |
| Chicago | TOR ÖNDER Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. Kastamonu Üniversitesi Orman Fakültesi Dergisi 19, no.2 (2019): 259 - 265. 10.17475/kastorman.626376 |
| MLA | TOR ÖNDER Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. Kastamonu Üniversitesi Orman Fakültesi Dergisi, vol.19, no.2, 2019, ss.259 - 265. 10.17475/kastorman.626376 |
| AMA | TOR Ö Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. Kastamonu Üniversitesi Orman Fakültesi Dergisi. 2019; 19(2): 259 - 265. 10.17475/kastorman.626376 |
| Vancouver | TOR Ö Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard. Kastamonu Üniversitesi Orman Fakültesi Dergisi. 2019; 19(2): 259 - 265. 10.17475/kastorman.626376 |
| IEEE | TOR Ö "Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard." Kastamonu Üniversitesi Orman Fakültesi Dergisi, 19, ss.259 - 265, 2019. 10.17475/kastorman.626376 |
| ISNAD | TOR, ÖNDER. "Effects of Countersink Hole on Driving Torques of Screw in Joints Constructed of Medium Density Fiberboard". Kastamonu Üniversitesi Orman Fakültesi Dergisi 19/2 (2019), 259-265. https://doi.org/10.17475/kastorman.626376 |
