Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method

Serkan Islak, (Kastamonu Üniversitesi, Makine Mühendisliği Bölümü, Kastamonu, Türkiye)
Nuray Emin, (Kastamonu Üniversitesi, Biyomedikal Mühendisliği Bölümü, Kastamonu, Türkiye)
Cihan Özorak, (Kastamonu Üniversitesi, Metalurji ve Malzeme Mühendisliği Bölümü, Kastamonu, Türkiye)
Husain R. H. HRAAM (Kastamonu Üniversitesi, Fen Bilimleri Enstitüsü, Kastamonu, Türkiye)
Research on Engineering Structures and Materials
4 0
Yıl: 2019 Cilt: 5 Sayı: 2 Sayfa Aralığı: 127 - 136 Metin Dili: İngilizce DOI: 10.17515/resm2018.57is0709 İndeks Tarihi: 01-07-2020

Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method

Öz:
Ceramic materials with excellent mechanical, corrosion and abrasion resistanceis set in terms of features such as biomaterials. In this study, Al2O3, Al2O3-40%TiO2, ZrO2 - 8% Y2O3 and Cr2O3-2% TiO2 ceramic coatings were produced byplasma spraying on AISI 316L stainless steel surface. It was aimed to investigatemicrostructure, hardness and biocompatibility properties of coatings. Scanningelectron microscope (SEM) analysis and X-ray diffraction (XRD) phase analysiswere used to determine the microstructure and phase composition properties.The biocompatibility properties of coatings have been tried to be determined byanalyzing cytotoxicity and viability. The SEM images show that the ceramiccoatings are connected in accordance with the substrate. The XRD analyzes showthe formation of binary and ternary complex phases in the coating layers. Cr2O3-2% TiO2 coating has the highest hardness in the coating layers. Biocompatibilitytests reveal the most compatible and consistent results in terms of cytotoxicitywere obtained with Al2O3-40% TiO2 coating.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • [1] Wong, JY, Bronzino, JD. Biomaterials, CRC Press, Taylor&Francis Group, LLC, 2007.
  • [2] Williams, DF. Williams dictionary of biomaterials, Liverpool University Press 1999.
  • [3] Lutıšanová, G, Kuzıelová, E, Palou, MT, Kozánková, J. Static and Dynamic In Vitro Test of Bioactivity of Glass Ceramics, Ceramics – Silikáty, 2011; 55(2): 106-113.
  • [4] Demirkıran, H. (2003). Biyocam Takviyeli Hidroksiapatit Kompozitlerinin Geliştirilmesi, MSc. Thesis, İTÜ Fen Bilimleri Enstitüsü, İstanbul.
  • [5] Lee, KY, Park, M, Kim, HM, Lim, YJ, Chun, HJ, Kim, H, Moon, SH. Ceramic bioactivity: progresses, challenges and perspectives. Biomedical materials, 2006; 1(2):R31–R37. https://doi.org/10.1088/1748-6041/1/2/R01
  • [6] Heimann, RB. Plasma-spray coating, VCH, New York, 1996. [28] Tian, W, Wang, Y, Yang, Y. Three body abrasive wear characteristics of plasma sprayed conventional and nanostructured Al2O3-13% TiO2 coatings. Tribology International, 2010; 43(5-6):876-881. https://doi.org/10.1016/j.triboint.2009.12.023 [29] Castell, JV, Gmez-Lechn, MJ. In vitro methods in pharmaceutical research. Elsevier, 1996. https://doi.org/10.1016/B978-0-12-163390-5.X5000-5 [7] Pawlowski, L. The science and engineering of thermal spray coatings, John Wiley & Sons, Ltd., England. 2008.
  • [8] Pantelis, DI, Psyllaki, P, Alexopoulos, N. Tribological behaviour of plasma-sprayed Al2O3 coatings under severe wear conditions. Wear, 2000; 237: 197-204. https://doi.org/10.1016/S0043-1648(99)00324-5
  • [9] Song, EP, Ahn, J, Lee, S, Kim, NJ. Effects of critical plasma spray parameter and spray distance on wear resistance of Al2O3-8 wt.%TiO2 coatings plasma-sprayed with nanopowders. Surface and Coatings Technology, 2008; 202: 3625-3632. https://doi.org/10.1016/j.surfcoat.2008.01.002
  • [10] Datye, A, Koneti, S, Gomes, G, Wu, KH, Lin, HT. Synthesis and characterization of aluminum oxide-boron carbide coatings by air plasma spraying. Ceramics International, 2010; 36: 1517-1522. https://doi.org/10.1016/j.ceramint.2010.02.024
  • [11] Wang, Y, Jiang, S, Wang, M, Wang, S, Xiao, TD, Strutt, PR. Abrasive wear characteristic of plasma sprayed nanostructured alumina/titania coatings. Wear, 2000; 237: 176– 185. https://doi.org/10.1016/S0043-1648(99)00323-3
  • [12] Sun, Y, Li, B, Yang, D, Wang, T, Sasaki, Y, Ishii, K. Unlubricated friction and wear behaviour of zirconia ceramics. Wear, 1998; 215: 232-236. https://doi.org/10.1016/S0043-1648(97)00247-0
  • [13] Cadenas, M, Vijande, R, Montes, HJ, Sierra, JM. Wear behaviour of laser cladded and plasma sprayed WC–Co coatings. Wear, 1997; 212: 244-253. https://doi.org/10.1016/S0043-1648(97)00127-0
  • [14] ASTM C1327-15, Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics, ASTM International, West Conshohocken, PA, 2015. https://doi.org/10.1520/C1327-15
  • [15] Daroonparvar, M, Yajid, MAM, Yusof, NM, Bakhsheshi-Rad, HR, Hamzah, E, Nazoktabar, M. Investigation of three steps of hot corrosion process in Y2O3 stabilized ZrO2 coatings including nano zones. Journal of Rare Earths, 2014; 32(10):989-1002. https://doi.org/10.1016/S1002-0721(14)60173-3
  • [16] Krishnamurthy, N, Murali, MS, Mukunda, PG, Ramesh, MR. Characterization and wear behavior of plasma-sprayed Al2O3 and ZrO25CaO coatings on cast iron substrate. Journal of materials science, 2010; 45(3):850-858. https://doi.org/10.1007/s10853- 009-4009-3
  • [17] Fervel, V, Normand, B, Coddet, C. Tribological behavior of plasma sprayed Al2O3- based cermet coatings. Wear, 1999; 230(1):70-77. https://doi.org/10.1016/S0043- 1648(99)00096-4
  • [18] Rico, A, Rodriguez, J, Otero, E, Zeng, P, Rainforth, WM. Wear behaviour of nanostructured alumina–titania coatings deposited by atmospheric plasma spray. Wear, 2009; 267:1191–1197. https://doi.org/10.1016/j.wear.2009.01.022
  • [19] Islak, S, Buytoz, S, Ersöz, E, Orhan, N, Stokes, J, Hashmi, MS, Somunkıran, İ, Tosun, N. Effect on microstructure of TiO2 rate in Al2O3-TiO2 composite coating produced using plasma spray method. Optoelectronics and Advanced Materials – Rapid Communications, 2012; 6(9-10):844 – 849
  • [20] Lin, X, Zeng, Y, Lee, SW, Ding, C. Characterization of alumina–3 wt.% titania coating prepared by plasma spraying of nanostructured powders. Journal of the European Ceramic Society, 2004; 24:627-634. https://doi.org/10.1016/S0955-2219(03)00254- 1
  • [21] Hoffmann, S, Norberg, ST, Yoshimura, M. Melt synthesis of Al2TiO5 containing composites and reinvestigation of the phase diagram Al2O3–TiO2 by powder X-ray diffraction. Journal of Electroceramics, 2006; 16:327–330. https://doi.org/10.1007/s10832-006-9873-5
  • [22] Li, CJ, Yang, GJ, Ohmori, A. Relationship between particle erosion and lamellar microstructure for plasma-sprayed alumina coatings. Wear, 2006; 260:1166-1172. https://doi.org/10.1016/j.wear.2005.07.006
  • [23] Sundararajan, G, Sen, D, Sivakumar, G. The tribological behaviour of detonation sprayed coatings: the importance of coating process parameters. Wear, 2005; 258:377– 391. https://doi.org/10.1016/j.wear.2004.03.022
  • [24] Tian, W, Wang, Y, Yang, Y, Li, C. Toughening and strengthening mechanism of plasma sprayed nanostructured Al2O3–13 wt.% TiO2 coatings. Surface and Coatings Technology, 2009; 204(5): 642-649. https://doi.org/10.1016/j.surfcoat.2009.08.045
  • [25] Ouyang, JH, Sasaki, S. Microstructure and tribological characteristics of ZrO2–Y2O3 ceramic coatings deposited by laser-assisted plasma hybrid spraying. Tribology International, 2002; 35(4):255-264. https://doi.org/10.1016/S0301-679X(02)00005- 1
  • [26] Singh, VP, Sil, A, Jayaganthan, R. Tribological behavior of plasma sprayed Cr2O3–3% TiO2 coatings. Wear, 2011; 272(1):149- 158.https://doi.org/10.1016/j.wear.2011.08.004
  • [27] Wang, B, Yan, J, Cui, H, Du, S. Preparation and characterization of nano TiO2/micron Cr2O3 composite particles. Journal of Alloys and Compounds, 2011; 509(15):5017- 5019. https://doi.org/10.1016/j.jallcom.2011.02.008
  • [28] Tian, W, Wang, Y, Yang, Y. Three body abrasive wear characteristics of plasma sprayed conventional and nanostructured Al2O3-13% TiO2 coatings. Tribology International, 2010; 43(5-6):876-881. https://doi.org/10.1016/j.triboint.2009.12.023
  • [29] Castell, JV, Gmez-Lechn, MJ. In vitro methods in pharmaceutical research. Elsevier, 1996. https://doi.org/10.1016/B978-0-12-163390-5.X5000-5
APA ISLAK S, Emin N, özorak c, R. H. HRAAM H (2019). Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. , 127 - 136. 10.17515/resm2018.57is0709
Chicago ISLAK SERKAN,Emin Nuray,özorak cihan,R. H. HRAAM Husain Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. (2019): 127 - 136. 10.17515/resm2018.57is0709
MLA ISLAK SERKAN,Emin Nuray,özorak cihan,R. H. HRAAM Husain Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. , 2019, ss.127 - 136. 10.17515/resm2018.57is0709
AMA ISLAK S,Emin N,özorak c,R. H. HRAAM H Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. . 2019; 127 - 136. 10.17515/resm2018.57is0709
Vancouver ISLAK S,Emin N,özorak c,R. H. HRAAM H Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. . 2019; 127 - 136. 10.17515/resm2018.57is0709
IEEE ISLAK S,Emin N,özorak c,R. H. HRAAM H "Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method." , ss.127 - 136, 2019. 10.17515/resm2018.57is0709
ISNAD ISLAK, SERKAN vd. "Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method". (2019), 127-136. https://doi.org/10.17515/resm2018.57is0709
APA ISLAK S, Emin N, özorak c, R. H. HRAAM H (2019). Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. Research on Engineering Structures and Materials, 5(2), 127 - 136. 10.17515/resm2018.57is0709
Chicago ISLAK SERKAN,Emin Nuray,özorak cihan,R. H. HRAAM Husain Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. Research on Engineering Structures and Materials 5, no.2 (2019): 127 - 136. 10.17515/resm2018.57is0709
MLA ISLAK SERKAN,Emin Nuray,özorak cihan,R. H. HRAAM Husain Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. Research on Engineering Structures and Materials, vol.5, no.2, 2019, ss.127 - 136. 10.17515/resm2018.57is0709
AMA ISLAK S,Emin N,özorak c,R. H. HRAAM H Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. Research on Engineering Structures and Materials. 2019; 5(2): 127 - 136. 10.17515/resm2018.57is0709
Vancouver ISLAK S,Emin N,özorak c,R. H. HRAAM H Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method. Research on Engineering Structures and Materials. 2019; 5(2): 127 - 136. 10.17515/resm2018.57is0709
IEEE ISLAK S,Emin N,özorak c,R. H. HRAAM H "Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method." Research on Engineering Structures and Materials, 5, ss.127 - 136, 2019. 10.17515/resm2018.57is0709
ISNAD ISLAK, SERKAN vd. "Microstructure, hardness and biocompatibility properties of ceramic based coatings produced by plasma spray method". Research on Engineering Structures and Materials 5/2 (2019), 127-136. https://doi.org/10.17515/resm2018.57is0709
Sayfa Oluşturulma Tarihi
23-04-2024 12:30

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları