Electrical conductivity, microstructure and wear properties of Cu-Mo coatings
Yıl: 2019 Cilt: 5 Sayı: 2 Sayfa Aralığı: 137 - 146 Metin Dili: İngilizce DOI: 10.17515/resm2018.58is0716 İndeks Tarihi: 01-07-2020
Electrical conductivity, microstructure and wear properties of Cu-Mo coatings
Öz: In this study, Cu–Mo composite coatings were produced on copper substrate byplasma spray technique. Electrical conductivity, microstructure and wearproperties of the composite coatings were investigated. Microstructure andphase composition of the coatings were examined by using optical microscopy(OM), scanning electron microscope (SEM), X-ray diffraction (XRD), and energydispersive X-ray spectroscopy (EDS). The microhardness experiments were alsoperformed by using a microhardness machine. The electrical conductivityproperties of the coatings were evaluated with eddy current instruments. Weartests were performed by pin-on-disc method. Although the electricalconductivities of the coatings are very small compared to the substrate, it hasbeen determined that the coatings exhibit very good tribological property andhigh hardness in comparison to the substrate.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- [1] Akhtar, F, Askari, SJ, Shah, KA, Du, X, Guo, S. Microstructure, mechanical properties, electrical conductivity and wear behaviour of high volume TiC reinforced Cu-matrix composites. Materials Characterization, 2009; 60: 327–336. https://doi.org/10.1016/j.matchar.2008.09.014
- [2] Chandrasekhar, SB, Sudhakara Sarma, S, Ramakrishna, M, Suresh Babu, P, Rao, TN, Kashyap, BP, Microstructure and properties of hot extruded Cu–1wt% Al2O3 nanocomposites synthesized by various techniques. Materials Science and Engineering: A, 2014; 591: 46-53. https://doi.org/10.1016/j.msea.2013.10.074
- [3] Božić, D, Stašić, J, Ružić, J, Vilotijević, M, Rajković, V, Synthesis and properties of a Cu– Ti–TiB2 composite hardened by multiple mechanisms. Materials Science and Engineering: A, 2011; 528: 8139-8144. https://doi.org/10.1016/j.msea.2011.07.061
- [4] Akbarpour, MR, Salahi, E, Alikhani Hesari, F, Simchi, A, Kim, HS, Microstructure and compressibility of SiC nanoparticles reinforced Cu nanocomposite powders processed by high energy mechanical milling. Ceramics International, 2014; 40: 951-960. https://doi.org/10.1016/j.ceramint.2013.06.091
- [5] Islak, S, Kır, D, and Buytoz, S. Effect of sintering temperature on electrical and microstructure properties of hot pressed cu-tic composites. Science of Sintering, 2014; 46: 15-21. https://doi.org/10.2298/SOS1401015I
- [6] Yener, T, Altinsoy, I, Yener, SC, Efe, GC, Ozbek, I, Bindal, C. An Evaluation of Cu-B4C Composites Manufactured by Powder Metallurgy. Acta Physica Polonica A, 2015; 127(4): 1045-104. https://doi.org/10.12693/APhysPolA.127.1045
- [7] Junjie Ni, Jian Li, Wei Luo, Qi Han, Yibin Yin, Zhengfeng Jia, Baoxu Huang, Chengchao Hu, Zelu Xu, Microstructure and properties of in-situ TiC reinforced copper nanocomposites fabricated via long-term ball milling and hot pressing, Journal of Alloys and Compounds, Volume 755, 2018, Pages 24-28. https://doi.org/10.1016/j.jallcom.2018.04.327
- [8] Chenchen, W, Huaijun, L, Zhiguo, Z, Wei L. Fabrication, interfacial characteristics and strengthening mechanisms of ZrB2 microparticles reinforced Cu composites prepared by hot-pressed sintering. Journal of Alloys and Compounds, 2018; 748: 546-552. https://doi.org/10.1016/j.jallcom.2018.03.169
- [9] Huanchao, L, Xinying, T, Weibing, W, Xiangwei, W, Jinfeng, L, Haoran, G. Effect of graphene addition on properties of Cu-based composites for electrical contacts. Materials Research Express, 2017; 4(6): 66506. https://doi.org/10.1088/2053- 1591/aa701b
- [10] Zhan, Y, and Guoding, Z. Graphite and SiC hybrid particles reinforced copper composite and its tribological characteristic. Journal of materials science letters, 2003;22: 1087-1089. https://doi.org/10.1023/A:10249868
- [11] Cockerman, BV. Measuring the fracture toughness of molybdenum–0.5 pct titanium– 0.1 pct zirconium and oxide dispersion-strengthened molybdenum alloys using standard and subsized bend specimens. Metallurgical and Materials Transactions A, 2002; 33A: 3685–707. https://doi.org/10.1007/s11661-002-0242-y
- [12] Song, EP, Ahn, J, Lee, S, Kim, NJ. Effects of critical plasma spray parameter and spray distance on wear resistance of Al2O3-8 wt.%TiO2 coatings plasma-sprayed with nanopowders. Surface and Coatings Technology, 2008; 202: 3625-3632. https://doi.org/10.1016/j.surfcoat.2008.01.002
- [13] Datye, A, Koneti, S, Gomes, G, Wu, KH, Lin, HT. Synthesis and characterization of aluminum oxide-boron carbide coatings by air plasma spraying. Ceramics International, 2010; 36: 1517-1522. https://doi.org/10.1016/j.ceramint.2010.02.024
- [14] Zhou, F, Wang, Y, Liu, F, Meng, Y, Dai, Z. Friction and wear properties of duplex MAO/CrN coatings sliding against Si3N4 ceramic balls in air, water and oil. Wear, 2009;267:1581-1588. https://doi.org/10.1016/j.wear.2009.06.009
- [15] Li, CJ, Yang, GJ, Ohmori, A. Relationship between particle erosion and lamellar microstructure for plasma-sprayed alumina coatings. Wear, 2006; 260: 1166-1172. https://doi.org/10.1016/j.wear.2005.07.006
- [16] Lee, CH, Kim, HK, Choi, HS, Ahn, HS. Phase transformation and bond coat oxidation behavior of plasma-sprayed zirconia thermal barrier coating. Surface and Coatings Technology, 2000;124:1-12. https://doi.org/10.1016/S0257-8972(99)00517-4
- [17] Fervel, V, Normand, B, Coddet, C. Tribological behavior of plasma sprayed Al2O3-based cermet coatings. Wear, 1999; 230:70-77. https://doi.org/10.1016/S0043- 1648(99)00096-4
- [18] Kuroda, T, Kobayashi, A. Adhesion characteristics of zirconia-alumina composite coatings by gas tunnel type plasma spraying. Vacuum, 2004; 73:635-641. https://doi.org/10.1016/j.vacuum.2003.12.105
- [19] Subramanian, PR, Laughlin, DE. The Cu-Mo (Copper-Molybdenum) system. Bulletin of Alloy Phase Diagrams, 1990; 11(2): 169-172. https://doi.org/10.1007/BF02841703
- [20] Fathy, A, Wagih, A, Abu-Oqail, A. Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball milling. Ceramics International, 2019;45:2319-2329. https://doi.org/10.1016/j.ceramint.2018.10.147
- [21] Firstov, S.A, Rogul, TG, Dub, SN, Svetchnicov, VL, Zandbergen, HW. Structure, Mechanical Behavior and Nanohardness of Chromium and Molybdenum Produced by Magnetron Sputtering. In Metallic Materials with High Structural Efficiency, 2004; 146:341-346. https://doi.org/10.1007/1-4020-2112-7_34
| APA | ISLAK S, ÇALIGÜLÜ U, R. H. HRAAM H, özorak c, KOÇ V (2019). Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. , 137 - 146. 10.17515/resm2018.58is0716 |
| Chicago | ISLAK SERKAN,ÇALIGÜLÜ UGUR,R. H. HRAAM Husain,özorak cihan,KOÇ Vahdettin Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. (2019): 137 - 146. 10.17515/resm2018.58is0716 |
| MLA | ISLAK SERKAN,ÇALIGÜLÜ UGUR,R. H. HRAAM Husain,özorak cihan,KOÇ Vahdettin Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. , 2019, ss.137 - 146. 10.17515/resm2018.58is0716 |
| AMA | ISLAK S,ÇALIGÜLÜ U,R. H. HRAAM H,özorak c,KOÇ V Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. . 2019; 137 - 146. 10.17515/resm2018.58is0716 |
| Vancouver | ISLAK S,ÇALIGÜLÜ U,R. H. HRAAM H,özorak c,KOÇ V Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. . 2019; 137 - 146. 10.17515/resm2018.58is0716 |
| IEEE | ISLAK S,ÇALIGÜLÜ U,R. H. HRAAM H,özorak c,KOÇ V "Electrical conductivity, microstructure and wear properties of Cu-Mo coatings." , ss.137 - 146, 2019. 10.17515/resm2018.58is0716 |
| ISNAD | ISLAK, SERKAN vd. "Electrical conductivity, microstructure and wear properties of Cu-Mo coatings". (2019), 137-146. https://doi.org/10.17515/resm2018.58is0716 |
| APA | ISLAK S, ÇALIGÜLÜ U, R. H. HRAAM H, özorak c, KOÇ V (2019). Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. Research on Engineering Structures and Materials, 5(2), 137 - 146. 10.17515/resm2018.58is0716 |
| Chicago | ISLAK SERKAN,ÇALIGÜLÜ UGUR,R. H. HRAAM Husain,özorak cihan,KOÇ Vahdettin Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. Research on Engineering Structures and Materials 5, no.2 (2019): 137 - 146. 10.17515/resm2018.58is0716 |
| MLA | ISLAK SERKAN,ÇALIGÜLÜ UGUR,R. H. HRAAM Husain,özorak cihan,KOÇ Vahdettin Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. Research on Engineering Structures and Materials, vol.5, no.2, 2019, ss.137 - 146. 10.17515/resm2018.58is0716 |
| AMA | ISLAK S,ÇALIGÜLÜ U,R. H. HRAAM H,özorak c,KOÇ V Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. Research on Engineering Structures and Materials. 2019; 5(2): 137 - 146. 10.17515/resm2018.58is0716 |
| Vancouver | ISLAK S,ÇALIGÜLÜ U,R. H. HRAAM H,özorak c,KOÇ V Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. Research on Engineering Structures and Materials. 2019; 5(2): 137 - 146. 10.17515/resm2018.58is0716 |
| IEEE | ISLAK S,ÇALIGÜLÜ U,R. H. HRAAM H,özorak c,KOÇ V "Electrical conductivity, microstructure and wear properties of Cu-Mo coatings." Research on Engineering Structures and Materials, 5, ss.137 - 146, 2019. 10.17515/resm2018.58is0716 |
| ISNAD | ISLAK, SERKAN vd. "Electrical conductivity, microstructure and wear properties of Cu-Mo coatings". Research on Engineering Structures and Materials 5/2 (2019), 137-146. https://doi.org/10.17515/resm2018.58is0716 |
