INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS
Yıl: 2022 Cilt: 30 Sayı: 1 Sayfa Aralığı: 79 - 89 Metin Dili: İngilizce DOI: 10.31796/ogummf.984220 İndeks Tarihi: 18-10-2022
INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS
Öz: The Bond method is widely used in the design of grinding circuits in an ore preparation plant, sizing of mills, determining power requirements and determining and measuring performance, and for materials considered to be comminution. Its use as a standard is very common in the industry as it provides satisfactory results in all industrial applications. The dynamic method was developed as an alternative to static methods in determining the mechanical properties of materials. There are studies investigating the static and dynamic properties of materials and revealing the relationship between these parameters. Previously, a lot of work were done between mechanical tests and grinding. However, in these studies, the relationships were only revealed with equations. Research which is mechanical property closest to the grinding mechanism was not made. In this study, the relationship between grinding and static and dynamic compressive strength was investigated. Dynamic compressive strength was also determined by the Hopkinson dynamic test. For the first time, the relationship between grinding and compressive strength based on the Hopkinson dynamic test was demonstrated. A relationship with a value of R2:0.82 and 0.738 was obtained between grindability and compressive strength depending on the Hopkinson dynamic test.
Anahtar Kelime: KAYAÇLARIN BOND ÖĞÜTÜLEBİLİRLİK TESTİ İLE STATİK VE DİNAMİK DAYANIMI ARASINDAKİ İLİŞKİNİN ARAŞTIRILMASI
Öz: Bir cevher hazırlama tesisindeki öğütme devrelerinin tasarımında Bond yöntemi, değirmenlerin boyutlandırılmasında, güç ihtiyacının belirlenmesinde ve performans belirleme ve ölçümünde ufalanması düşünülen malzemeler için yaygın olarak kullanılmaktadır. Tüm endüstriyel uygulamalarda tatmin edici sonuçlar sağladığı için bir standart olarak kullanımı endüstride çok yaygındır. Dinamik metot, malzemelerin mekanik özelliklerinin belirlenmesinde statik metotlar için bir alternatif olarak geliştirilmiştir. Malzemelerin statik ve dinamik özelliklerini araştıran ve bu parametreler arasındaki ilişkiyi ortaya koyan çalışmalar mevcuttur. Daha önce mekanik testler ile öğütme arasında birçok çalışma yapılmıştır. Ancak bu çalışmalarda sadece ilişkiler denklemlerle ortaya konmuştur. Hiç birisinde öğütme mekanizmasına en yakın mekanik özellik hangisinin olduğu konusunda bir araştırma yapılmamıştır. Bu çalışmada öğütme ile statik ve dinamik basınç dayanımı arasında ilişki araştırılmıştır. Dinamik basınç dayanımı da Hopkinson dinamik test ile belirlenmiştir. İlk defa öğütme ile Hopkinson dinamik teste bağlı basınç dayanımı arasında ilişki ortaya konmuştur. Öğütülebilirlik ile Hopkinson dinamik teste bağlı basınç dayanımı arasında R2:0.82 ve 0.738 değerine sahip bir ilişki elde edilmiştir.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- Austin, L.G. & Brame, K. (1983). A comparison of the Bond method for sizing wet tumbling ball mills with a size-mass balance simulation model. Powder Technol. 34, 261–274. doi: https://doi.org/10.1016/0032-5910(83)87059-4
- Bearman, R.A., Briggs, C.A. & Kojovic, T. (1997). The Application of Rock Mechanics Parameters to the Prediction of Comminution Behaviour. Minerals Engineering, 10, 3, 255-264. doi: https://doi.org/10.1016/S0892-6875(97)00002-2
- Berry,T.F. & Bruce., R.W. (1966). A simple method of determining the grindability of ores. Can. Min. J., vol, 80, pp. 63-65.
- Bond, F.C. (1961). Crushing and Grinding Calculations. British Chemical Engineering, 6, 378-385, 543-548.
- Bond, F.C. & Maxson, W.L. (1943). Standard grindability tests and calculations. Trans. Soc. Min. Eng., AIME 153, 362–372.
- Dai, F., Xia, K. W. & Tang, L Z. (2010). Rate dependence of the flexural tensile strength of Laurentian granite. International Journal of Rock Mechanics and Mining Sciences, 47 (3), pp. 469-475.
- Deniz, V. & Özdağ, H., (2003). A new approach to Bond grindability and work index: dynamic elastic parameters. Minerals Engineering, vol. 16, 211–217. doi: https://doi.org/10.1016/S0892-6875(02)00318- 7
- Horst, W. E. & Bassarear. J. H. (1976). Use of simplified ore grindability technique to evaluate plant performance. Trans. SME- AIME. Vol. 260. 348-351.
- Karra, V. K., (1981). Simulation of Bond grindability tests. CIM Bull., 74, pp. 195-199
- Kapur, P. C. (1970). Ana1ysis of the Bond Grindability Test. Trans. IMM, Vol. 79, pp. C-103-108.
- Kolsky, H. (1949). An investigation of the mechanical properties of materials at very high rates of strain. Proc. R. Phys. Soc. B 62, 676–700.
- Kumar, A., Mies, L.T.S. & Pengjun, Z. (2004). Design of an impact striker for a split Hopkinson pressure bar. J., Inst. Eng. 44(1), 119–130.
- Magdalinovic, N., (1989). A procedure for rapid determination of the Bond work index. Int. J. Min. Process. 27, 125–132.
- Mcmullan, D. (2006). Scanning electron microscopy 1928–1965. Scanning, 17 (3), 175. doi:
- Nematollahi, H., (1994). New size laboratory ball mill for Bond work index determination. Min. Eng. (April), 352–353.
- Smith, R.W. & Lee, K.H., (1968). A comparison of data from Bond type simulated closed-circuit and batch type grindability tests. Trans. Soc. Min. Eng., AIME 241, 91–99.
- Sisman, H., Altintas, M. & Ozturk, I., (1990). Relationships between seismic wave velocities and rock parameters in rock mechanics (in Turkish). II. Rock mechanic symposium, Ankara, pp. 221–237.
- Tüfekçi, K., (2008). Gerinim hızının kortikal kemiğin mekanik özellikleri üzerindeki etkisinin incelenmesi. Doktora tezi, Süleyman Demirel Üniversitesi, Fen bilimleri Enstitüsü, Isparta.
- Xia,K., Nasseri, M.H.B., Mohanty,F.Lu,B., Chen,R. & Luo, S.N., (2008). Effects of microstructures on dynamic compression of barre granite. International Journal of Rock Mechanics and Mining Sciences, 45 (6), pp. 879-887. doi: https://doi.org/10.1016/j.ijrmms.2007.09.013
- Van Heerden, W.L., (1987). General relations between static and dynamic moduli of rocks. Int. J. Rock Mech. Min. Sci. Geomech., Abstr. 24, 381–385.
- Yavuz, H., Tüfekçi, K., Kayacan, R., & Cevizci, H., (2012). Predicting the Dynamic Compressive Strength of Carbonate Rocks from Quasi-Static Properties. Experimental Mechanics, 53:367–376 DOI 10.1007/s11340-012-9648-7
- Yap, R.F., Sepulude, J.L. & Jauregui, R., (1982). Determination of the Bond work index using an ordinary laboratory batch ball mill; designing and installation of comminution circuits. Soc. Min. Eng., AIME, New York, 176–203.
| APA | UMUCU Y, GURSOY Y (2022). INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. , 79 - 89. 10.31796/ogummf.984220 |
| Chicago | UMUCU YAKUP,GURSOY YASAR HAKAN INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. (2022): 79 - 89. 10.31796/ogummf.984220 |
| MLA | UMUCU YAKUP,GURSOY YASAR HAKAN INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. , 2022, ss.79 - 89. 10.31796/ogummf.984220 |
| AMA | UMUCU Y,GURSOY Y INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. . 2022; 79 - 89. 10.31796/ogummf.984220 |
| Vancouver | UMUCU Y,GURSOY Y INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. . 2022; 79 - 89. 10.31796/ogummf.984220 |
| IEEE | UMUCU Y,GURSOY Y "INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS." , ss.79 - 89, 2022. 10.31796/ogummf.984220 |
| ISNAD | UMUCU, YAKUP - GURSOY, YASAR HAKAN. "INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS". (2022), 79-89. https://doi.org/10.31796/ogummf.984220 |
| APA | UMUCU Y, GURSOY Y (2022). INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online), 30(1), 79 - 89. 10.31796/ogummf.984220 |
| Chicago | UMUCU YAKUP,GURSOY YASAR HAKAN INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) 30, no.1 (2022): 79 - 89. 10.31796/ogummf.984220 |
| MLA | UMUCU YAKUP,GURSOY YASAR HAKAN INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online), vol.30, no.1, 2022, ss.79 - 89. 10.31796/ogummf.984220 |
| AMA | UMUCU Y,GURSOY Y INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online). 2022; 30(1): 79 - 89. 10.31796/ogummf.984220 |
| Vancouver | UMUCU Y,GURSOY Y INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online). 2022; 30(1): 79 - 89. 10.31796/ogummf.984220 |
| IEEE | UMUCU Y,GURSOY Y "INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS." Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online), 30, ss.79 - 89, 2022. 10.31796/ogummf.984220 |
| ISNAD | UMUCU, YAKUP - GURSOY, YASAR HAKAN. "INVESTIGATION OF THE RELATIONSHIP BETWEEN BOND GRINDABILITY TEST AND STATIC AND DYNAMIC STRENGTH OF ROCKS". Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) 30/1 (2022), 79-89. https://doi.org/10.31796/ogummf.984220 |
