ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN
Yıl: 2022 Cilt: 30 Sayı: 2 Sayfa Aralığı: 152 - 158 Metin Dili: İngilizce DOI: 10.31796/ogummf.1009481 İndeks Tarihi: 18-10-2022
ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN
Öz: This study's aim is to investigate the wet and dry grindability of K-feldspar in a narrow grain size range in a stirred ball mill. In the evaluation of the grinding process, a full factorial design was used to observe the effects of the selected parameters on the dependent variable. On a narrow grain size range grinding, the parameter effects such as ball diameter, stirring speed, grinding time, and interstitial filling ratio were investigated. Experimental results showed that K-feldspar can be efficiently milled with a stirred ball mill in a narrow grain size range (1-10 microns).
Anahtar Kelime: Karıştırmalı Bilyalı Değirmende K-Feldspatın Öğütülebilirliğini Etkileyen Faktörlerin Tam Faktöriyel Tasarımla Analizi
Öz: Bu çalışmanın amacı, karıştırmalı bir bilyalı değirmende K-feldspatın dar tane boyutu aralığında yaş ve kuru öğütülebilirliğini araştırmaktır. Öğütme işleminin değerlendirilmesinde, seçilen parametrelerin bağımlı değişken üzerindeki etkilerini gözlemlemek için tam faktöriyel tasarım kullanılmıştır. Dar tane boyutu aralığında öğütmede bilye çapı, karıştırma hızı, öğütme süresi ve ara doldurma oranı gibi parametre etkileri incelenmiştir. Deneysel sonuçlar, K-feldspatın, dar tane boyutu aralığında (1-10 mikron) karıştırmalı bir bilyalı değirmen ile verimli bir şekilde öğütülebileceğini göstermiştir.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- Altun, O., Benzer, H., & Enderle, U. (2013). Effects of operating parameters on the efficiency of dry stirred milling. Minerals Engineering, 43-44, 58-66. doi: 10.1016/j.mineng.2012.08.003
- Austin, L., Klimpel, R., & Luckie, P. (1984). Process engineering of size reduction: Ball milling, soc. Min. Eng. AIME, New York, NY, 112-113.
- Becker, J. E. (1987). Attrition mill fine grinding of advanced ceramic powders. INTERCERAM Interceram, 36(6), 55.
- Bernhardt, C., Reinsch, E., & Husemann, K. (1999). The influence of suspension properties on ultra-fine grinding in stirred ball mills. Powder Technology, 105(1–3), 357-361. doi: http://dx.doi.org/10.1016/S0032-5910(99)00159- X
- Bilir, K., & Ipek, H. (2011). Micro-fine grinding of potassium feldspar using stirred ball mill. Paper presented at the Proceedings of XIV Balkan Mineral Processing Congress, Tuzla-Bosnia and Herzegovina.
- Burleson, M. (2003). The ceramic glaze handbook: Materials, techniques, formulas: Lark Books.
- Cayirli, S., & Gokcen, H. S. (2021). The influence of stirred mill orientation on calcite grinding. Mining, Metallurgy & Exploration, 38(3), 1551-1560.
- Celik, M. S. (1988). Acceleration of breakage rates of anthracite during grinding in a ball mill. Powder technology, 54(4), 227-233. doi: 10.1016/0032- 5910(88)80052-4
- Choi, H., Lee, W., Lee, J., Chung, H., & Choi, W. S. (2007). Ultra-fine grinding of inorganic powders by stirred ball mill: Effect of process parameters on the particle size distribution of ground products and grinding energy efficiency. Metals and Materials International, 13(4), 353-358. doi: 10.1007/bf03027893
- Cuhadaroglu, A. D., & Kara, E. (2015). The investigation of grindability of refractory wastes in their recycling. Refractories and Industrial Ceramics, 56(3), 236-244.
- Dehghan, R., Noaparast, M., Kolahdoozan, M., & Mousavi, S. M. (2008). Statistical evaluation and optimization of factors affecting the leaching performance of a sphalerite concentrate. International Journal of Mineral Processing, 89(1-4), 9-16. doi: 10.1016/j.minpro.2008.07.003
- Dowdle, H. J. (1994). Gringding glazes: A comparison of milling methods. Paper presented at the CERAMIC INDUSTRY.
- Goodson, R., Larson, F., & Sheehan, L. (1985). Energy input monitoring during attritor milling. Int. J. Refract. Hard Met., 4(2), 70-76.
- Ipek, H., Ucbas, Y., & Hosten, C. (2005). Ternary-mixture grinding of ceramic raw materials. Minerals Engineering, 18(1), 45-49. doi: 10.1016/j.mineng.2004.05.006
- Just, A., & Yang, M. (1997). Attrition dry milling in continuous and batch modes. Paper presented at the The Powder and Bulk Solids Conference/Exhibition, Chicago, IL.
- Ma, Z. H., Hu, S. A., Zhang, S. M., & Pan, X. Z. (1998). Breakage behavior of quartz in a laboratory stirred ball mill. Powder technology, 100(1), 69-73. doi: 10.1016/S0032-5910(98)00054-0
- Mansouri, M., Khonsari, M. M., Holgerson, M. H., & Aung, W. (2002). Application of analysis of variance to wet clutch engagement. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 216(J3), 117-125. doi: 10.1243/1350650021543942
- Martı́nez-L, A., & Ortiz, J. (2003). Study of celestite flotation efficiency using sodium dodecyl sulfonate collector: Factorial experiment and statistical analysis of data. International Journal of Mineral Processing, 70(1-4), 83-97.
- Montgomery, D., C. (2009). Introduction to statistical quality control. In (Sixth Edition ed.): John Wiley & Sons, Inc.
- Padden, S. A., & Reed, J. S. (1993). Grinding kinetics and media wear during attrition milling. American Ceramic Society Bulletin, 72(3), 101-&. Retrieved from <Go to ISI>://WOS:A1993KR24500008
- Reed, J. S. (1995). Principles of ceramics processing. In (pp. 313-337): Wiley.
- Samanli, S., Cuhadaroglu, D., Ucbas, Y., & Ipek, H. (2010). Investigation of breakage behavior of coal in a laboratory-scale stirred media mill. International Journal of Coal Preparation and Utilization, 30(1), 20- 31. doi: 10.1080/19392691003776418
- Szegvari, A. (1994). The fine grinding of ceramics with attritors. Interceram, 43(2), 97-98.
- Szegvari, A., & Yang, M. (1989). Fine grinding of high- value-added industrial minerals by attrition milling. Les Mineraux Industriels Materiaux des Annees, 90.
- Szegvari, A., & Yang, M. (1995). Versatility of attrition milling (wet or dry process; batch or continuous mode). Paper presented at the Seminar on Powder Production by Fine Grinding, The Pennsylvania State Univ.
- Tamhane, A. C. (2009). Two level factorial experiments. In Statistical analysis of designed experiments (pp. 256-299): John Wiley & Sons, Inc.
| APA | Bilir K, IPEK H (2022). ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. , 152 - 158. 10.31796/ogummf.1009481 |
| Chicago | Bilir Kemal,IPEK Halil ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. (2022): 152 - 158. 10.31796/ogummf.1009481 |
| MLA | Bilir Kemal,IPEK Halil ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. , 2022, ss.152 - 158. 10.31796/ogummf.1009481 |
| AMA | Bilir K,IPEK H ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. . 2022; 152 - 158. 10.31796/ogummf.1009481 |
| Vancouver | Bilir K,IPEK H ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. . 2022; 152 - 158. 10.31796/ogummf.1009481 |
| IEEE | Bilir K,IPEK H "ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN." , ss.152 - 158, 2022. 10.31796/ogummf.1009481 |
| ISNAD | Bilir, Kemal - IPEK, Halil. "ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN". (2022), 152-158. https://doi.org/10.31796/ogummf.1009481 |
| APA | Bilir K, IPEK H (2022). ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online), 30(2), 152 - 158. 10.31796/ogummf.1009481 |
| Chicago | Bilir Kemal,IPEK Halil ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) 30, no.2 (2022): 152 - 158. 10.31796/ogummf.1009481 |
| MLA | Bilir Kemal,IPEK Halil ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online), vol.30, no.2, 2022, ss.152 - 158. 10.31796/ogummf.1009481 |
| AMA | Bilir K,IPEK H ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online). 2022; 30(2): 152 - 158. 10.31796/ogummf.1009481 |
| Vancouver | Bilir K,IPEK H ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online). 2022; 30(2): 152 - 158. 10.31796/ogummf.1009481 |
| IEEE | Bilir K,IPEK H "ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN." Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online), 30, ss.152 - 158, 2022. 10.31796/ogummf.1009481 |
| ISNAD | Bilir, Kemal - IPEK, Halil. "ANALYSIS OF THE FACTORS AFFECTING THE GRINDABILITY OF K-FELDSPAR BY THE FULL FACTORIAL DESIGN". Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) 30/2 (2022), 152-158. https://doi.org/10.31796/ogummf.1009481 |
