Characterisation of aluminium industrial wastewater and investigation of recovery alternatives

Hicran KAYA, (Tekirdağ Namık Kemal Üniversitesi, Fen Bilimleri Enstitüsü, Çevre Mühendisliği Bölümü, Tekirdağ, Türkiye)
Elçin GÜNEŞ, (Tekirdağ Namık Kemal Üniversitesi, Çorlu Mühendislik Fakültesi, Çevre Mühendisliği Bölümü, Tekirdağ, Türkiye)
Nesli AYDIN (Karabük Üniversitesi, Mühendislik Fakültesi, Çevre Mühendisliği Bölümü, Karabük, Türkiye)
Environmental Research & Technology
15 1
Yıl: 2022 Cilt: 5 Sayı: 3 Sayfa Aralığı: 249 - 256 Metin Dili: İngilizce DOI: 10.35208/ert.1036966 İndeks Tarihi: 05-10-2022

Characterisation of aluminium industrial wastewater and investigation of recovery alternatives

Öz:
Aluminium industry is one of the largest sectors and wastewater generated from this industry could cause crucial environmental problems due to its high heavy metal concentration and conductivity. Therefore, this study aims to determine the characterisation of the wastewater discharged from the two aluminium facilities by considering water recovery potential. While Facility-A produces stainless steel kitchenware, such as pots and pans, In Facility-B, anodised coating takes place from secondary aluminium and wastewater is generated from the units where anodised coating baths and control processes are carried out. For the analyses, the wastewater composite samples from different sections, such as washing, sand-blasting and dyeing in Facility-A were taken in 2 and 24 hours. In Facility-B, three 2-hour composite influent water samples and an effluent sample from chemical wastewater treatment were taken to determine conductivity, pH, chemical oxygen demand (COD), total suspended solids (TSS), etc. As a result of the analyses made, a high value of TSS was detected at all sampling points in Facility-A. It was also seen that the conductivity after demineralisation process in Facility-A was below 30. In Facility-B, it was determined that while the pH obtained from two influent samples was below the discharge limits and showed acidic characteristics, one sample was very basic with a pH value of 12.19 and exceeds the upper limit of discharge. All influent samples in Facility-B show high TSS content in comparison with discharge limits specified in the regulation.
Anahtar Kelime: Aluminium Industry chemical oxygen demand total suspended solids water recovery wastewater

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • [1] A. Bouzekova-Penkova, and A. Miteva, “Some aero- space applications of 7075 (B95) aluminium alloy,” Bulgarian Academy of Sciences- Space Research and Technology Institute-Aerospace Research in Bulgar- ia, Vol. 34, pp. 165–179, 2022. [CrossRef]
  • [2] N. Ateş, and N. Uzal, “Removal of heavy metals from aluminum anodic oxidation wastewaters by mem- brane filtration,” Environmental Science and Pollution Research, Vol. 25, pp. 22259–22272, 2018. [CrossRef]
  • [3] D. Brough, and H. Jouhara, “The aluminium indus- try: A review on state-of-the-art technologies, envi- ronmental impacts and possibilities for waste heat recovery,” International Journal of Thermofluids, Vol. 1-2, Article 100007, 2020. [CrossRef]
  • [4] M.M. Hanafiah, M.F. Zainuddin, N.U.M. Nizam, A.A. Halim, and A. Rasool, “Phytoremediation of aluminum and iron from industrial wastewater using ipomoea aquatica and centella asiatica,” Applied Sci- ences, Vol. 10(9), Article 3064. 2020. [CrossRef]
  • [5] P. Kinnunen, R. Obenaus-Emler, J. Raatikainen, J. Guimara, A. Ciroth, and K. Heiskanen, “Review of closed water loops with ore sorting and tailings val- orisation for a more sustainable mining industry,” Journal of Cleaner Production, Vol. 278 (1), Article 1232372021. [CrossRef]
  • [6] D. Liu, E. Mansour, P. Fawell, and L. Berry, “Improved water recovery: A review of clay-rich tailings and sa- line water interactions,” Powder Technology, Vol. 364, pp. 604–621, 2020. [CrossRef]
  • [7] K. Tütün, Z. Utlu, and Y.B. Büyükakıncı, “Importance of recovery of rawmaterials and wastewater at anod- izing coating facility,” ABMYO Dergisi, Vol. 47, pp. 93–112, 2017. [Turkish]
  • [8] İ. Özbay, and M. Kavaklı, “Alüminyum sektörü endüstriyel atiksu aritma tesislerinin kontrolü ve işletme sorunlarininin çözümlerine yönelik uygula- nabilir öneriler,” Blacksea International Environmen- tal Symposium, August 25-29, 2008, Giresun, Turkey. [Turkish]
  • [9] F. Ntuli, and T. Falayi, “Adsorption of Al, Cr and Zn from a wastewater effluent using basic oxygen furnace slag,” IOP Conference Series: Earth and Environmen- tal Science, Vol. 191, Article 012112, 2018. [CrossRef]
  • [10] H. Peng, and J. Guo, “Removal of chromium from wastewater by membrane filtration, chemical precip- itation, ion exchange, adsorption electrocoagulation, electrochemical reduction, electrodialysis, electrode- ionization, photocatalysis and nanotechnology: a re- view,” Environmental Chemistry Letters, Vol.18, pp. 2055–2068, 2020. [CrossRef]
  • [11] M.Corral-Bobadilla, A.González-Marcos, F.Al- ba-Elías, and E.D. de Santo Domingo, “Valorization of bio-waste for the removal of aluminum from in- dustrial wastewater,” Journal of Cleaner Production, Vol. 264, Article 121608, 2020. [CrossRef]
  • [12] C.C. Earna, K. Minhee, Y. Seyoon, L.Gooyong, and P.C.Mine, “Mesoporous La/Mg/Si-incorporated palm shell activated carbon for the highly efficient removal of aluminum and fluoride from water,” Journal of the Taiwan Institute of Chemical Engineers, Vol. 93, pp. 306–314, 2018. [CrossRef]
  • [13] E. Poulin, J.F. Blais, and G. Mercier, “Transformation of red mud from aluminium industry into a coagu- lant for wastewater treatment,” Hydrometallurgy, Vol. 92(1–2), pp. 16–25, 2008. [CrossRef]
  • [14] S. Velusamy, A. Roy, S. Sundaram, and T.K. Mallick, “A review on heavy metal ions and containing dyes removal through graphene oxide-based adsorption strategies for textile wastewater treatment,” A Jour- nal of the Chemical Society of Japan, Vol. 21(7), pp. 1570–1610, 2021. [CrossRef]
  • [15] T. Chambino, A. Correia, and S. Barany, “Aluminium salts hydrolysis products from industrial anodising sludges in wastewater treatment,” In: Z. D. Hórvölgyi, and É. Kiss, Colloids for Nano-and Biotechnology, pp 65–69, 2008. [CrossRef]
  • [16] J.M. Choubert, L. Rieger, A. Shaw, J. Copp, M. Spéran- dio, K. Sørensen, S. Rönner-Holm, E. Morgenroth, H. Melcer, and S. Gillot, “Rethinking wastewater char- acterisation methods for activated sludge systems – a position paper,” Water Science and Technology, Vol. 67(11), pp. 2363–2373, 2013. [CrossRef]
  • [17] G. Crini, and E. Lichtfouse, “Advantages and disad- vantages of techniques used for wastewater treat- ment,” Environmental Chemistry Letters, Vol. 17, pp. 145–155, 2019. [CrossRef]
  • [18] Y. Anjaneyulu, N.C. Sreedhara, and S.S.D. Raj, “Dec- olourization of industrial effluents: available methods and emerging technologies—a review,” Reviews in Environmental Science and Bio/Technology, Vol. 4, pp. 245–273, 2005. [CrossRef]
  • [19] G. Crini, “Recent developments in polysaccha- ride-based materials used as adsorbents in wastewa- ter treatment,” Progress in Polymer Science, Vol. 30, pp. 38–70, 2005. [CrossRef]
  • [20] C.A. Yates, P.J. Johnes, and R.G.M. Spencer, “Char- acterisation of treated effluent from four commonly employed wastewater treatment facilities: A UK case study,” Journal of Environmental Management, Vol. 232, pp. 919–927, 2019. [CrossRef]
  • [21] K.T. Ravndal, E. Opsahl, A. Bagi, and R. Commed- al, “Wastewater characterisation by combining size fractionation, chemical composition and biode- gradability,” Water Research, Vol. 131, pp. 151–160, 2018. [CrossRef]
  • [22] A. Shah, and M. Shah, “Characterisation and biore- mediation of wastewater: A review exploring bioremediation as a sustainable technique for pharma- ceutical wastewater,” Groundwater for Sustainable Development, Vol. 11, Article 100383, 2020. [CrossRef]
  • [23] N.C.G. Silveira, M.L.F. Martins, A.C.S. Bezerra, and F.G.S. Araujo, “Red mud from the aluminium indus- try: Production, characteristics, and alternative appli- cations in construction materials—a review,” Sustain- ability, Vol. 13(22), Article 12741, 2021. [CrossRef]
  • [24] C. Kar, and B. Surekha, “Characterisation of alumin- ium metal matrix composites reinforced with titani- um carbide and red mud,” Materials Research Inno- vations, Vol. 25, pp. 67–75, 2021. [CrossRef]
  • [25] N.D. Chinta, N. Selvaraj, and V. Mahesh, “Mechanical characterization of aluminium – red mud metal ma- trix composites,” Materials Today, Vol. 5(13–3), pp. 26911–26917, 2018. [CrossRef]
  • [26] A. Sharma, R.M. Belokar, and S. Kumar, “Dry sliding wear characterization of red mud reinforced alumin- ium composite”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, Arti- cle 294, 2018. [CrossRef]
  • [27] P. Li, C. Yang, F. Sun, and X. Li, “Fabrication of con- ductive ceramic membranes for electrically assisted fouling control during membrane filtration for waste- water treatment,” Chemosphere, Vol. 280, Article 130794, 2021. [CrossRef]
  • [28] J.M. Veza, and J.J. Rodriguez-Gonzales, “Second use for old reverse osmosis membranes: wastewater treat- ment,” Desalination, Vol. 157(1–3), pp. 65–72, 2003. [CrossRef]
  • [29] Ministry of Environment, Urbanisation and Climate Change, “Water pollution control regulation,” Official Gazette, 31.12.2004, No: 25687.
  • [30] H. Kaya, “Alüminyum işleme ve kaplama endüstrisi atıksularının karakterizasyonu ve geri kazanım alter- natiflerinin araştırılması,” [Master thesis], Tekirdağ Namık Kemal University, 2019.
  • [31] S.F. Mohsenpour, S. Hennige, N. Willoughby, A. Ade- loye, and T. Gutierrez, “Integrating micro-algae into wastewater treatment: A review,” Science of The Total Environment, Vol. 752, Article 142168, 2021. [CrossRef]
  • [32] A. Ali, M.C. Nymann, M.L. Christensen, and C.A. Quist-Jensen, “Industrial wastewater treatment by nanofiltration—a case study on the anodizing indus- try,” Membranes, Vol. 10, Article 85, 2020. [CrossRef]
  • [33] A. Ali, J.H. Jacobsen, H.C. Jensen, M. L. Christensen, and C.A. Quist-Jensen, “Treatment of wastewater solutions from anodizing industry by membrane dis- tillation and membrane crystallization,” Applied Sci- ences, Vol 9, Article 287, 2019. [CrossRef]
  • [34] N. Ates, and N. Uzal, “Removal of heavy metals from aluminum anodic oxidation wastewaters by mem- brane filtration,” Environmental Science and Pollu- tion Research, Vol. 25, pp. 22259–22272. [CrossRef]
APA KAYA H, GÜNEŞ E, AYDIN N (2022). Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. , 249 - 256. 10.35208/ert.1036966
Chicago KAYA Hicran,GÜNEŞ Elçin,AYDIN Nesli Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. (2022): 249 - 256. 10.35208/ert.1036966
MLA KAYA Hicran,GÜNEŞ Elçin,AYDIN Nesli Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. , 2022, ss.249 - 256. 10.35208/ert.1036966
AMA KAYA H,GÜNEŞ E,AYDIN N Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. . 2022; 249 - 256. 10.35208/ert.1036966
Vancouver KAYA H,GÜNEŞ E,AYDIN N Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. . 2022; 249 - 256. 10.35208/ert.1036966
IEEE KAYA H,GÜNEŞ E,AYDIN N "Characterisation of aluminium industrial wastewater and investigation of recovery alternatives." , ss.249 - 256, 2022. 10.35208/ert.1036966
ISNAD KAYA, Hicran vd. "Characterisation of aluminium industrial wastewater and investigation of recovery alternatives". (2022), 249-256. https://doi.org/10.35208/ert.1036966
APA KAYA H, GÜNEŞ E, AYDIN N (2022). Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. Environmental Research & Technology, 5(3), 249 - 256. 10.35208/ert.1036966
Chicago KAYA Hicran,GÜNEŞ Elçin,AYDIN Nesli Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. Environmental Research & Technology 5, no.3 (2022): 249 - 256. 10.35208/ert.1036966
MLA KAYA Hicran,GÜNEŞ Elçin,AYDIN Nesli Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. Environmental Research & Technology, vol.5, no.3, 2022, ss.249 - 256. 10.35208/ert.1036966
AMA KAYA H,GÜNEŞ E,AYDIN N Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. Environmental Research & Technology. 2022; 5(3): 249 - 256. 10.35208/ert.1036966
Vancouver KAYA H,GÜNEŞ E,AYDIN N Characterisation of aluminium industrial wastewater and investigation of recovery alternatives. Environmental Research & Technology. 2022; 5(3): 249 - 256. 10.35208/ert.1036966
IEEE KAYA H,GÜNEŞ E,AYDIN N "Characterisation of aluminium industrial wastewater and investigation of recovery alternatives." Environmental Research & Technology, 5, ss.249 - 256, 2022. 10.35208/ert.1036966
ISNAD KAYA, Hicran vd. "Characterisation of aluminium industrial wastewater and investigation of recovery alternatives". Environmental Research & Technology 5/3 (2022), 249-256. https://doi.org/10.35208/ert.1036966
Sayfa Oluşturulma Tarihi
13-05-2024 12:49

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları