Yıl: 2021 Cilt: 36 Sayı: 3 Sayfa Aralığı: 1289 - 1301 Metin Dili: Türkçe İndeks Tarihi: 10-11-2022

Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması

Öz:
Yapıştırıcılar; üretim, montaj ve onarım için kullanılan birleştirme elemanlarıdır. Farklı tür ve özellikteki yapıştırıcılar günümüzde yaygın olarak kullanılmakta ve yapıştırıcıların içerisine nanopartiküller eklenerek mekanik özelliklerinin iyileştirilmesi amaçlanmaktadır. Yapılan bu çalışmada bireysel ve sanayi uygulamalarında metal yüzeylerin yapıştırılmasında kullanılan ve iki farklı epoksi yapıştırıcının içerisine iki farklı çapta çok duvarlı karbon nanopartiküller ağırlıkça %0,5 - %5 aralığındaki oranlarda katılarak farklı pürüzlendirilmiş yüzeylerdeki yapıştırıcıların yapışma dayanımındaki değişimler incelenmiştir. Yüzey durumu, nanopartikül çapı ve yapıştırıcı türüne göre %2-%3,5 oranına kadar yapışma dayanımında artış görülürken bu oranlarda sonra nanopartiküllerin olumsuz etkileri ortaya çıkarak yapışma dayanımında düşüşler tespit edilmiştir.
Anahtar Kelime: Epoksi yapıştırıcı karbon nanopartikül adhezyon test

Investigation of the effects of nanoparticles on metal adhesives

Öz:
Adhesives; are joining elements used for production, assembly and repair. Adhesives of different types and properties are widely used today and it is aimed to improve their mechanical properties by adding nanoparticles into the adhesives. In this study, two different epoxy adhesives, which are used in the bonding of metal surfaces in individual and industrial applications, are incorporated in two different epoxy adhesives in the range of 0.5% to 5% by weight, and changes in the adhesive strength of adhesives on different roughened surfaces are examined. While there was an increase in adhesion strength up to 2% to 3.5% according to surface condition, nanoparticle diameter and adhesive type, negative effects of nanoparticles were observed after these ratios and decreases in adhesion strength were determined.
Anahtar Kelime: Epoxy adhesive carbon nanoparticle adhesion test

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • 1. May M., Wang H.M., Akid R., Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybridsol–gel epoxy system, International Journal of Adhesion & Adhesives, 30, 505–512, 2010.
  • 2. Razavi S.M.J., Ayatollahi M.R., Nemati Giv A., Khoramishad H.,Single lap joints bonded with structural adhesives reinforced with a mixture of silica nanoparticles and multi walled carbon nanotubes, International Journal of Adhesion and Adhesives, 80, 76–86, 2018.
  • 3. Saraç I., Adin H., Temiz Ş., Experimental determination of the static and fatigue strength of the adhesive joints bonded by epoxy adhesive including different particles, Composites Part B, 155, 92-103, 2018.
  • 4. Khoramishad H., Ashofteh R.S., Mobasheri M., Berto F., Temperature dependence of the shear strength in adhesively bonded joints reinforced with multi-walled carbon nanotubes, Engineering Fracture Mechanics, 199, 179–187, 2018.
  • 5. Khashaba U.A., Aljinaidi A.A., Hamed M.A., Development of CFRE composite scarf adhesive joints with SiC and $Al_2O_3$ nanoparticle, Composite Structures, 128, 415–427, 2015.
  • 6. Douba A., Genedy M., Matteo E.N., Kandil U.F., Stormont J., Reda Taha M.M., The significance of nanoparticles on bond strength of polymer concrete to steel, International Journal of Adhesion & Adhesives, 74, 77–85, 2017.
  • 7. Jakubinek M., Ashrafi B., Rubi Y.M., Rahmat M., Yourdkhani M., Kim K., Laqua K., Yousefpour A., Simard B., Nanoreinforced epoxy and adhesive joints incorporating boron nitride nanotubes, International Journal of Adhesion and Adhesives, 84, 194–201, 2018.
  • 8. Saloma C., Prolongo M.G., Toribio A., Martínez- Martínez A.J., Aguirre de Cárcer I., Prolongo S.G., Mechanical properties and adhesive behavior of epoxy- graphene nanocomposites, International Journal of Adhesion and Adhesives, 84, 119–125, 2018.
  • 9. Ghosh P.K., Patel A., Kumar K., Adhesive joining of copper using nano-filler composite adhesive, Polymer, 87, 159-169, 2016.
  • 10. Quan D., Murphy N., Ivankovic A., Fracture behaviour of epoxy adhesive joints modified with coreshell rubber nanoparticles Engineering Fracture Mechanics, 182, 566–576, 2017.
  • 11. Wang Z., Jia Z., Feng X., Zou Y., Graphene nanoplatelets/epoxy composites with excellent shear properties for construction adhesives, Composites Part B 152, 311–315, 2018.
  • 12. Helezi Z., Hong-Yuan L., Huamin Z., Yun Z., Xiping G., Yiu-Wing M., On adhesive properties of nano- silica/epoxy bonded single-lap joints, Materials and Design, 95, 212–218, 2016.
  • 13. Gültekin K., Akpinar S., Gürses A., Eroglu Z., Cam S., Akbulut H., Keskin Z., Ozel A., The effects of graphene nanostructure reinforcement on the adhesive method and the graphene reinforcement ratio on the failure load in adhesively bonded joints, Composites Part B, 98, 362- 369, 2016.
  • 14. Xixi L., Zhengjun Y., Zhang P., Gu D., Al2O3 nanoparticles reinforced Fe-Al laser cladding coatings with enhanced mechanical properties, Journal of Alloys and Compounds, 755, 41-54, 2018.
  • 15. Boumaza M., Khan R., Zahrani S.,An experimental investigation of the effects of nanoparticles on the mechanical properties of epoxy coating, Thin Solid Films, 620, 160–164, 2016.
  • 16. Quan D., Carolan D., Rouge C., Murphy N., Ivankovic A., Mechanical and fracture properties of epoxy adhesives modified with graphene nanoplatelets and rubber particles, International Journal of Adhesion and Adhesives, 81, 21–29, 2018.
  • 17. Aydın S., Investigation of Effects of Carbon Nanoparticles on Epoxy Adhesives, Çukurova University Journal of the Faculty of Engineering and Architecture, 34, 143-154, 2019.
  • 18. Fraga, F., Vazquez, E.C., Rodriguez-Numez, E., Martinez-Ageitos, J.M., Curing kinetics of the epoxy system diglycidyl ether of bisphenol a/ isophoronediamine by fourier transform infrared spectroscopy, Polymer Adv. Tech., 19, 1623-1628, 2008.
  • 19. Jana, S., Zhong, W.H., FTIR study of ageing epoxy resin reinforced by reactive graphitic nanofibers, J. Appl. Polymer Sci., 106, 3555-3563, 2007.
  • 20. Abdalla, M., Dean, D., Robinson, P., Nyairo, E., Cure behavior of of epoxy/MWCNT nanocomposites: the effect of nanotube surface modification, Polymer, 49, 3310-3317, 2008.
  • 21. Lanlan, Z., Guoping., L, Jian, L., Youwen, W., The effect of nanoparticles on the adhesion of epoxy adhesive, Materials Letters, 60, 3031-3033, 2006.
  • 22. Lanlan, Z., Guoping., L, Youwen, W., Effect of nano- $Al_2O_3$ on adhesion strength of epoxy adhesive and steel, International Journal of Adhesion and Adhesives, 28, 23-28, 2007.
  • 23. Wernik, J.M., Meguid, S.A., On the mechanical characterization of carbon nanotube reinforced epoxy adhesives, Materials and Design, 59, 19–32, 2014.
APA AYDIN S (2021). Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. , 1289 - 1301.
Chicago AYDIN SİNAN Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. (2021): 1289 - 1301.
MLA AYDIN SİNAN Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. , 2021, ss.1289 - 1301.
AMA AYDIN S Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. . 2021; 1289 - 1301.
Vancouver AYDIN S Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. . 2021; 1289 - 1301.
IEEE AYDIN S "Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması." , ss.1289 - 1301, 2021.
ISNAD AYDIN, SİNAN. "Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması". (2021), 1289-1301.
APA AYDIN S (2021). Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 36(3), 1289 - 1301.
Chicago AYDIN SİNAN Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 36, no.3 (2021): 1289 - 1301.
MLA AYDIN SİNAN Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol.36, no.3, 2021, ss.1289 - 1301.
AMA AYDIN S Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi. 2021; 36(3): 1289 - 1301.
Vancouver AYDIN S Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi. 2021; 36(3): 1289 - 1301.
IEEE AYDIN S "Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması." Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 36, ss.1289 - 1301, 2021.
ISNAD AYDIN, SİNAN. "Nanopartiküllerin metal yapıştırıcılar üzerindeki etkilerinin araştırılması". Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 36/3 (2021), 1289-1301.