The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials
Yıl: 2023 Cilt: 4 Sayı: 1 Sayfa Aralığı: 38 - 49 Metin Dili: İngilizce DOI: 10.55546/jmm.1200868 İndeks Tarihi: 03-07-2023
The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials
Öz: UHMWPE (Ultra High Molecular Weight Polyethylene) is a widely used polymer due to its superior mechanical properties. The microstructural, mechanical, and tribological properties of this polymer material produced by the compression molding technique significantly depend on the production parameters. The different molding pressures and temperatures dramatically impact the properties of the material. In this study, UHMWPE polymer samples were produced at three different molding pressures (150 Bar, 250 Bar, and 350 Bar) and molding temperatures (120°C, 150°C, and 180°C) using the compression molding technique. The microstructural, mechanical, and tribological properties of the samples were examined. It is observed that low-temperature molding production parameters cause an increase in strength. On the other hand, this situation enables decreased ductility. It has been determined that as the molding temperatures increase, ductility increase in all the same molding pressure groups. Similarly, it was observed that increasing the molding pressure in the same temperature group increased the strength of the material. It has been determined that there is an optimum molding pressure and temperature for wear resistance. It has been observed that the coefficient of friction (COF) behavior is not much affected by the molding parameters. Agglomeration of polymer particles is envisaged as the main reason for forming optimum pressure and temperature conditions in wear resistance. Agglomerated particles in the microstructure reduce bonding strength and deteriorate wear resistance. The study determined the optimum molding pressure (250 Bar) and temperature (150°C) for the production of UHMWPE material by a compression molding technique.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- Bahadur S., The Development Of Transfer Layers And Their Role In Polymer Tribology. Wear 245, 92-99, 2000.
- Dearn K., Hoskins T., Petrov D., Reynolds S., Banks R., Applications Of Dry Film Lubricants For Polymer Gears. Wear, 298-299, 99-108, 2013.
- Feyzullahoglu E., Saffak Z., The Tribological Behaviour Of Different Engineering Plastics Under Dry Friction Conditions. Materials & Design, 29(1), 205-211, 2008.
- Ge S., Wang Q., Zhang D., Zhu H., Xiong D., Huang C., Huang X., Friction And Wear Behavior Of Nitrogen Ion Implanted UHMWPE Against ZrO2 Ceramic. Wear, 255, 1069-1075, 2003.
- Ginzburg B., Tochilnikov D., Bakhareva V., Anisimov V., Kireenko O., Polymeric Materials For Water-Lubricated Plain Bearings. Russian Journal of Applied Chemistry, 79(5), 695-706, 2006.
- Gürgen S., Wear Performance Of UHMWPE Based Composites İncluding Nano-Sized Fumed Silica. Composites Part B: Engineering, 173, 2019.
- Hüseyin Ü., Yetgin S., ÇYMAPE Ve PA-6 Mühendislik Polimerlerinin Aşınma Ve Sürtünme Davranışlarının İncelenmesi. Türk Bilim Araştırma Vakfı Dergisi, 3(2), 145-152, 2010.
- Jintang G., Tribochemical Effects In Formation Of Polymer Transfer Film. Wear, 245(1-2), 100-106, 2000.
- Kanaga S., Bruck L., Sundararajan S., Wang J., Lin Z., Xu H., Li X., Friction And Wear Behavior Of Ultra-High Molecular Weight Polyethylene As A Function Of Polymer Crystallinity. Acta Biomater, 4(5), 1401-1410, 2008.
- Klapperich C., Komvopoulos K., Pruitt L., Tribological Properties and Microstructure Evolution of Ultra-High Molecular Weight Polyethylene. Journal of Tribology, 121(2), 394-402, 2008.
- Koç R., Mühendislik Plastiklerinin Aşınma Davranışlarının Deneysel İncelenmesi. Makine Teknolojileri Elektronik Dergisi, 8, (2), 27-40, 2011.
- Kuma A., Bijwe J., Sharma S., Hard Metal Nitrides: Role İn Enhancing The Abrasive Wear Resistance Of UHMWPE. Wear, 378-379, 35-42, 2017.
- Mourad I., Fouad H., Elleithy R., Impact Of Some Environmental Conditions On The Tensile, Creep-Recovery, Relaxation, Melting And Crystallinity Behaviour Of UHMWPE-GUR 410-Medical Grade. Materials & Design, 30(10), 4112-4119, 2009.
- Oral E., Ghali W., Rowell L., Micheli R., Lozynsky J., Muratoglu K., A Surface Crosslinked UHMWPE Stabilized By Vitamin E With Low Wear And High Fatigue Strength. Biomaterials, 31(27), 7051-7060, 2010.
- Panin V., Kornienko A., Nguensuan T., Ivanova R., Korchagin A., Shilko V., Pleskachevskii M., Wear Resistance Of Composites Based On Hybrid UHMWPE–PTFE Matrix: Mechanical And Tribotechnical Properties Of The Matrix. Journal of Friction and Wear, 36(3), 249-256, 2015.
- Rymuza Z., Polymer Bearings. In Encyclopedia of Tribology, Springer, Boston, pp. 2557-2562.
- Sarı A., Salman Ö., Experimental Investigation Of Tribological Properties Of Polymers Bearing Material. Afyon Kocatepe University Journal of Sciences and Engineering, 16(2), 446-453, 2016.
- Tong J., Ma Y., Jiang, M., Effects Of The Wollastonite Fiber Modification On The Sliding Wear Behavior Of The UHMWPE Composites. Wear, 255(1-6), 734-741, 2016.
- Uzuner F., Gediktaş M., Salınım Hareketi Yapan Radyal Kaymalı Plastik Yataklarda Sürtünme. İstanbul Teknik Üniversitesi Dergisi / D, 3(6), 2010.
- Wang S., Ge S., The Mechanical Property And Tribological Behavior Of UHMWPE: Effect Of Molding Pressure. Wear, 263(7-12), 949-956, 2007.
- Wu J., Buckley P., O’Connor J., Mechanical İntegrity Of Compression-Moulded Ultra-High Molecular Weight Polyethylene: Effects Of Varying Process Conditions. Biomaterials, 23(17), 3773-3783, 2002.
- Xiong D., Ge S., Friction And Wear Properties Of UHMWPE/Al2O3 Ceramic Under Different Lubricating Conditions. Wear, 250(1-12), 242-245. 2001.
| APA | KAYA E (2023). The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. , 38 - 49. 10.55546/jmm.1200868 |
| Chicago | KAYA Esad The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. (2023): 38 - 49. 10.55546/jmm.1200868 |
| MLA | KAYA Esad The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. , 2023, ss.38 - 49. 10.55546/jmm.1200868 |
| AMA | KAYA E The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. . 2023; 38 - 49. 10.55546/jmm.1200868 |
| Vancouver | KAYA E The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. . 2023; 38 - 49. 10.55546/jmm.1200868 |
| IEEE | KAYA E "The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials." , ss.38 - 49, 2023. 10.55546/jmm.1200868 |
| ISNAD | KAYA, Esad. "The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials". (2023), 38-49. https://doi.org/10.55546/jmm.1200868 |
| APA | KAYA E (2023). The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. Journal of Materials and Mechatronics:A (Online), 4(1), 38 - 49. 10.55546/jmm.1200868 |
| Chicago | KAYA Esad The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. Journal of Materials and Mechatronics:A (Online) 4, no.1 (2023): 38 - 49. 10.55546/jmm.1200868 |
| MLA | KAYA Esad The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. Journal of Materials and Mechatronics:A (Online), vol.4, no.1, 2023, ss.38 - 49. 10.55546/jmm.1200868 |
| AMA | KAYA E The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. Journal of Materials and Mechatronics:A (Online). 2023; 4(1): 38 - 49. 10.55546/jmm.1200868 |
| Vancouver | KAYA E The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials. Journal of Materials and Mechatronics:A (Online). 2023; 4(1): 38 - 49. 10.55546/jmm.1200868 |
| IEEE | KAYA E "The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials." Journal of Materials and Mechatronics:A (Online), 4, ss.38 - 49, 2023. 10.55546/jmm.1200868 |
| ISNAD | KAYA, Esad. "The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials". Journal of Materials and Mechatronics:A (Online) 4/1 (2023), 38-49. https://doi.org/10.55546/jmm.1200868 |
