Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites
Yıl: 2023 Cilt: 11 Sayı: 2 Sayfa Aralığı: 431 - 438 Metin Dili: İngilizce DOI: 10.29109/gujsc.1279794 İndeks Tarihi: 07-07-2023
Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites
Öz: This study attempted to filled epoxy, a widely used industrial material, with pumice, a cheap volcanic rock, in order to form a composite material. The objective was to evaluate the worth of the pumice and improve the mechanical properties of the epoxy. Composite samples with no filler, 10%, 20%, and 30% filler were produced. An ultrasonic mixer during manufacture made sure the powder was dispersed properly, and vacuuming stopped air pockets from accumulating in the composite. The mechanical characteristics of the composites were evaluated by compression testing, and the post-production distribution of the powder was observed using optical microscope pictures. Finally, XRF analysis was used to establish the composition of the pumice powder. The outcomes demonstrated that adding filler greatly enhanced the maximum stress and unit strain values of the composites. Optimum mechanical values were found in 20% pumice filled composite. The maximum stress value of the composite material with 20% filler was found to be 30.6 MPa, and the equivalent unit strain at this point was 0.049%, according to the mechanical test findings.
Anahtar Kelime: Pomza Dolgulu Epoksi Esaslı Kompozitlerin Dolgu Oranının Mekanik Özelliklerine Etkisinin İncelenmesi
Öz: Bu çalışmada yaygın olarak kullanılan ve endüstriyel bir malzeme olan epoksi, ucuz volkanik bir kayaç olan pomza ile doldurularak kompozit bir malzeme elde edilmeye çalışılmıştır. Amaç, pomzayı katma değeri yüksek olarak değerlendirmek ve epoksinin mekanik özelliklerini iyileştirmektir. Dolgusuz, %10, %20 ve %30 dolgulu kompozit numuneler üretilmiştir. Üretim sırasında bir ultrasonik karıştırıcı kullanılarak tozun homojen bir şekilde dağılması sağlanmıl ve vakumlama ile hava ceplerinin kompozitte birikmesi önlenmiştir. Kompozitlerin mekanik özellikleri basma testi ile tespit edilmiş ve tozun üretim sonrası dağılımı optik mikroskop resimleri kullanılarak gözlemlenmiştir. Son olarak, pomza tozunun bileşimini belirlemek için XRF analizi kullanılmıştır. Sonuçlar, dolgu maddesi eklenmesinin kompozitlerin maksimum gerilim ve gerinim değerlerini büyük ölçüde artırdığını göstermiştir. Optimum mekanik değerler %20 pomza dolgulu kompozitte bulunmuştur. %20 dolgulu kompozit malzemenin maksimum gerilme değeri 30,6 MPa ve bu noktadaki eşdeğer birim gerinim mekanik test bulgularına göre %0,049 olarak bulunmuştur.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- [1] E. Kosedag and R. Ekici, “Low-velocity and ballistic impact resistances of particle reinforced metal–matrix composites: An experimental study,” J. Compos. Mater., vol. 56, no. 7, pp. 991–1002, Mar. 2022, doi: 10.1177/00219983211068101.
- [2] N. Saba and M. Jawaid, “3 - Epoxy resin based hybrid polymer composites,” in Hybrid Polymer Composite Materials, V. K. Thakur, M. K. Thakur, and A. Pappu, Eds. Woodhead Publishing, 2017, pp. 57–82. doi: 10.1016/B978-0-08-100787-7.00003-2.
- [3] E. Kosedag, “Effect of artificial aging on 3- point bending behavior of glass fiber/epoxy composites,” J. Reinf. Plast. Compos., p. 07316844221146287, Dec. 2022, doi: 10.1177/07316844221146287.
- [4] E. Kosedag, U. Caliskan, and R. Ekici, “The effect of artificial aging on the impact behavior of SiC nanoparticle-glass fiber-reinforced polymer matrix composites,” Polym. Compos., vol. 43, no. 2, pp. 964–976, 2022, doi: 10.1002/pc.26426.
- [5] R. Ekici and E. Kosedag, “Comparison of the low-velocity impact behaviors of SiC and pumice particle-reinforced metal matrix composites,” Int. J. Mech. Prod. Eng., vol. 5, no. 10, pp. 101–105, 2017.
- [6] Z. Aygun and M. Aygun, “Spectroscopic analysis of Ahlat stone (ignimbrite) and pumice formed by volcanic activity,” Spectrochim. Acta. A. Mol. Biomol. Spectrosc., vol. 166, pp. 73–78, Sep. 2016, doi: 10.1016/j.saa.2016.05.018.
- [7] K. Sever, M. Atagür, M. Tunçalp, L. Altay, Y. Seki, and M. Sarıkanat, “The effect of pumice powder on mechanical and thermal properties of polypropylene,” J. Thermoplast. Compos. Mater., vol. 32, no. 8, pp. 1092–1106, Aug. 2019, doi: 10.1177/0892705718785692.
- [8] M. Koyuncu, “Evaluation of Mechanical and Water Absorption Behaviours of Corn Shell/Pumice Reinforced Epoxy Composites,” Eur. J. Sci. Technol., Jan. 2022, doi: 10.31590/ejosat.1042310.
- [9] R. Purohit, P. Sahu, R. S. Rana, V. Parashar, and S. Sharma, “Analysis of Mechanical Properties of Fiber Glass-Epoxy-Fly Ash Composites,” Mater. Today Proc., vol. 4, no. 2, pp. 3102–3109, Jan. 2017, doi: 10.1016/j.matpr.2017.02.193.
- [11] Menderes Koyuncu and Baran Erkek, “Effects of Particle Size, Pumice Powder Filling on The Water Absorption Behavior, and Elongation at Break Properties of Walnut Husk Particles Reinforced Epoxy Composite,” Eur. J. Res. Dev., vol. 2, no. 2, pp. 182–189, Jun. 2022, doi: 10.56038/ejrnd.v2i2.51.
- [12] C. A. Fleischer and M. Zupan, “Mechanical Performance of Pumice-reinforced Epoxy Composites:,” J. Compos. Mater., vol. 44, no. 23, pp. 2679–2696, May 2010, doi: 10.1177/0021998310369575.
| APA | KOSEDAG E (2023). Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. , 431 - 438. 10.29109/gujsc.1279794 |
| Chicago | KOSEDAG ERTAN Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. (2023): 431 - 438. 10.29109/gujsc.1279794 |
| MLA | KOSEDAG ERTAN Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. , 2023, ss.431 - 438. 10.29109/gujsc.1279794 |
| AMA | KOSEDAG E Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. . 2023; 431 - 438. 10.29109/gujsc.1279794 |
| Vancouver | KOSEDAG E Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. . 2023; 431 - 438. 10.29109/gujsc.1279794 |
| IEEE | KOSEDAG E "Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites." , ss.431 - 438, 2023. 10.29109/gujsc.1279794 |
| ISNAD | KOSEDAG, ERTAN. "Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites". (2023), 431-438. https://doi.org/10.29109/gujsc.1279794 |
| APA | KOSEDAG E (2023). Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 11(2), 431 - 438. 10.29109/gujsc.1279794 |
| Chicago | KOSEDAG ERTAN Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 11, no.2 (2023): 431 - 438. 10.29109/gujsc.1279794 |
| MLA | KOSEDAG ERTAN Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, vol.11, no.2, 2023, ss.431 - 438. 10.29109/gujsc.1279794 |
| AMA | KOSEDAG E Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. 2023; 11(2): 431 - 438. 10.29109/gujsc.1279794 |
| Vancouver | KOSEDAG E Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. 2023; 11(2): 431 - 438. 10.29109/gujsc.1279794 |
| IEEE | KOSEDAG E "Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites." Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 11, ss.431 - 438, 2023. 10.29109/gujsc.1279794 |
| ISNAD | KOSEDAG, ERTAN. "Investigation of the Effect of Filling Ratio on Mechanical Properties of Pumice Filled Epoxy-Based Composites". Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 11/2 (2023), 431-438. https://doi.org/10.29109/gujsc.1279794 |
