INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD

KURT, Emre; KARAÇAY, Umut Efe; TUTAR, Mumin

doi:10.17482/uumfd.1220597

INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD

Emre KURT, (Milli Savunma Üniversitesi, Hava Astsubay Meslek Yüksekokulu, Fatih Mh, Ege Cd. No:3, 35410 Gaziemir, İzmir, Türkiye)

Umut Efe KARAÇAY, (Milli Savunma Üniversitesi, Hava Astsubay Meslek Yüksekokulu, Fatih Mh, Ege Cd. No:3, 35410 Gaziemir, İzmir, Türkiye)

Mümin TUTAR (Bursa Uludağ Üniversitesi, Yenişehir İbrahim Orhan Meslek Yüksekokulu, İznik Yolu Üzeri 3.Km, 16900 Yenişehir, Bursa, Türkiye)

Uludağ Üniversitesi Mühendislik Fakültesi Dergisi

2 0

Yıl: 2023 Cilt: 28 Sayı: 2 Sayfa Aralığı: 523 - 536 Metin Dili: İngilizce DOI: 10.17482/uumfd.1220597 İndeks Tarihi: 12-10-2023

INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD

Öz:

Recently, the studies on lightweighting have gained significant importance due to requirements such as energy efficiency and sustainability. Polymer materials are a group of materials that are frequently used for this purpose. This study investigated the effects of laser power, cutting speed and focal point on the kerf width, which are the most effective process parameters in laser cutting of Polymethylmethacrylate, a low-cost polymer material, using Response Surface Methodology and ANOVA. The results obtained from the data analysis show that the kerf width is seriously affected by the focal point depth as well as the speed and power.

Anahtar Kelime: Laser cutting PMMA Response Surface Method

Pmma Malzemesinin Co2 Lazer Kesiminde İşlem Parametrelerinin Etkisinin Yanıt Yüzey Metodu İle Araştırılması

Öz:

Son zamanlarda enerji verimliliği ve sürdürülebilirlik gibi gereksinimler nedeniyle hafifleştirme çalışmaları büyük önem kazanmıştır. Polimer malzemeler bu amaçla sıklıkla kullanılan bir malzeme grubudur. Bu çalışmada, düşük maliyetli bir polimer olan Polymethylmethacrylate malzemesinin lazer kesiminde en etkili işlem parametreleri olan lazer gücü, kesme hızı ve odak noktasının kerf genişliği üzerindeki etkileri Yanıt Yüzey Metodu ve ANOVA kullanılarak incelenmiştir. Veri analizinden elde edilen sonuçlar, çentik genişliğinin hız ve gücün yanı sıra odak noktası derinliğinden ciddi şekilde etkilendiğini göstermektedir.

Anahtar Kelime: Lazer kesim PMMA Yanıt Yüzey Metodu

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

1. Ahmed, N., Alahmari, A. M., Darwish, S., and Naveed, M. (2016). Laser beam micro-milling of nickel alloy: dimensional variations and RSM optimization of laser parameters. Applied Physics A, 122, 1-16. doi.org/10.1007/s00339-016-0553-2
2. Alahmari, A. M., Darwish, S., and Ahmed, N. (2016). Laser beam micro-milling (LBMM) of selected aerospace alloys. The International Journal of Advanced Manufacturing Technology, 86, 2411-2431. doi.org/10.1007/s00170-015-8318-1
3. Aniszewska, M., Maciak, A., Zychowicz, W., Zowczak, W., Mühlke, T., Christoph, B., ... and Sujecki, S. (2020). Infrared laser application to wood cutting. Materials, 13(22), 5222. doi.org/10.3390/ma13225222
4. Becker, H., and Locascio, L. E. (2002). Polymer microfluidic devices. Talanta, 56(2), 267-287. doi.org/10.1016/S0039-9140(01)00594-X
5. Bora, M. Ö. (2014). The influence of heat treatment on scratch behavior of polymethylmethacrylate (PMMA). Tribology International, 78, 75-83. doi.org/10.1016/j.triboint.2014.04.030
6. Borse, S. C., and Kadam, M. S. (2018). Experimental Study in micromilling of Inconel 718 by fiber laser machining. Procedia Manufacturing, 20, 213-218. doi.org/10.1016/j.promfg.2018.02.031
7. Cavdar, K., and Tanrısever, T. (2013). Farklı Malzemelerin Lazerle Kesilmesi. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 18(2), 79-99. doi.org/10.17482/uujfe.99888
8. Dudala, S., Rao, L. T., Dubey, S. K., Javed, A., and Goel, S. (2020). Experimental characterization to fabricate CO2 laser ablated PMMA microchannel with homogeneous surface. Materials Today: Proceedings, 28, 804-807. doi.org/10.1016/j.matpr.2019.12.302
9. Falco, M., Simari, C., Ferrara, C., Nair, J. R., Meligrana, G., Bella, F., ... and Gerbaldi, C. (2019). Understanding the effect of UV-induced cross-linking on the physicochemical properties of highly performing PEO/LiTFSI-based polymer electrolytes. Langmuir, 35(25), 8210-8219. doi.org/10.1021/acs.langmuir.9b00041.
10. Georgopoulou, A., Kummerlöwe, C., and Clemens, F. (2020). Effect of the elastomer matrix on thermoplastic elastomer-based strain sensor fiber composites. Sensors, 20(8), 2399. doi.org/10.3390/s20082399
11. Ghosal, A., and Manna, A. (2013). Response surface method based optimization of ytterbium fiber laser parameter during machining of Al/Al2O3-MMC. Optics & Laser Technology, 46, 67-76. doi.org/10.1016/j.optlastec.2012.04.030
12. Kamal, A., Elsheikh, A. H., and Showaib, E. (2020, November). Pre-Cracking techniques of polymeric materials: an overview. In IOP Conference Series: Materials Science and Engineering (Vol. 973, No. 1, p. 012028). IOP Publishing. doi.org/10.1088/1757-899X/973/1/012028
13. Khamar, P., and Prakash, S. (2020). Investigation of dimensional accuracy in CO2 laser cutting of PMMA. Materials Today: Proceedings, 28, 2381-2386. doi.org/10.1016/J.MATPR.2020.04.711
14. Khoshaim, A. B., Elsheikh, A. H., Moustafa, E. B., Basha, M., and Showaib, E. A. (2021). Experimental investigation on laser cutting of PMMA sheets: Effects of process factors on kerf characteristics. journal of materials research and technology, 11, 235-246. doi.org/10.1016/J.JMRT.2021.01.012
15. Masoud, F., Sapuan, S. M., Mohd Ariffin, M. K. A., Nukman, Y., and Bayraktar, E. (2020). Cutting processes of natural fiber-reinforced polymer composites. Polymers, 12(6), 1332. doi.org/10.3390/polym12061332
16. de Castro Monsores, K. G., da Silva, A. O., Oliveira, S. D. S. A., Rodrigues, J. G. P., and Weber, R. P. (2019). Influence of ultraviolet radiation on polymethylmethacrylate (PMMA). Journal of Materials Research and Technology, 8(5), 3713-3718. doi.org/10.1016/J.JMRT.2019.06.023
17. Piana, G., Bella, F., Geobaldo, F., Meligrana, G., and Gerbaldi, C. (2019). PEO/LAGP hybrid solid polymer electrolytes for ambient temperature lithium batteries by solvent-free,“one pot” preparation. Journal of Energy Storage, 26, 100947. doi.org/10.1016/J.EST.2019.100947
18. Prakash, S., and Kumar, S. (2015). Fabrication of microchannels on transparent PMMA using CO 2 Laser (10.6 μm) for microfluidic applications: An experimental investigation. International Journal of Precision Engineering and Manufacturing, 16, 361-366. doi.org/10.1007/s12541-015-0047-8
19. Sarıkaya, M., and Yılmaz, V. (2018). Optimization and predictive modeling using S/N, RSM, RA and ANNs for micro-electrical discharge drilling of AISI 304 stainless steel. Neural Computing and Applications, 30, 1503-1517. doi.org/10.1007/s00521-016-2775-9
20. Son, S., and Lee, D. (2020). The effect of laser parameters on cutting metallic materials. Materials, 13(20), 4596. doi.org/10.3390/ma13204596
21. Vakili-Tahami, F., Adibeig, M. R., and Hassanifard, S. (2019). Optimizing creep lifetime of friction stir welded PMMA pipes subjected to combined loadings using rheological model. Polymer Testing, 79, 106049. doi.org/10.1016/j.polymertesting.2019.106049
22. Venkatesan, K., Ramanujam, R., & Kuppan, P. (2016). Parametric modeling and optimization of laser scanning parameters during laser assisted machining of Inconel 718. Optics & Laser Technology, 78, 10-18. doi.org/10.1016/j.optlastec.2015.09.021
23. Yüce, C. (2019). Paslanmaz çelik malzemelerin fiber lazer kesiminde proses parametrelerinin optimizasyonu. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 24(2), 685-696. doi.org/10.17482/uumfd.514168

APA	KURT E, KARAÇAY U, TUTAR M (2023). INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. , 523 - 536. 10.17482/uumfd.1220597
Chicago	KURT Emre,KARAÇAY Umut Efe,TUTAR Mumin INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. (2023): 523 - 536. 10.17482/uumfd.1220597
MLA	KURT Emre,KARAÇAY Umut Efe,TUTAR Mumin INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. , 2023, ss.523 - 536. 10.17482/uumfd.1220597
AMA	KURT E,KARAÇAY U,TUTAR M INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. . 2023; 523 - 536. 10.17482/uumfd.1220597
Vancouver	KURT E,KARAÇAY U,TUTAR M INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. . 2023; 523 - 536. 10.17482/uumfd.1220597
IEEE	KURT E,KARAÇAY U,TUTAR M "INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD." , ss.523 - 536, 2023. 10.17482/uumfd.1220597
ISNAD	KURT, Emre vd. "INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD". (2023), 523-536. https://doi.org/10.17482/uumfd.1220597

APA	KURT E, KARAÇAY U, TUTAR M (2023). INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 28(2), 523 - 536. 10.17482/uumfd.1220597
Chicago	KURT Emre,KARAÇAY Umut Efe,TUTAR Mumin INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 28, no.2 (2023): 523 - 536. 10.17482/uumfd.1220597
MLA	KURT Emre,KARAÇAY Umut Efe,TUTAR Mumin INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol.28, no.2, 2023, ss.523 - 536. 10.17482/uumfd.1220597
AMA	KURT E,KARAÇAY U,TUTAR M INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi. 2023; 28(2): 523 - 536. 10.17482/uumfd.1220597
Vancouver	KURT E,KARAÇAY U,TUTAR M INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi. 2023; 28(2): 523 - 536. 10.17482/uumfd.1220597
IEEE	KURT E,KARAÇAY U,TUTAR M "INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD." Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 28, ss.523 - 536, 2023. 10.17482/uumfd.1220597
ISNAD	KURT, Emre vd. "INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS IN CO2 LASER CUTTING OF PMMA MATERIAL BY RESPONSE SURFACE METHOD". Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 28/2 (2023), 523-536. https://doi.org/10.17482/uumfd.1220597