Yıl: 2022 Cilt: 5 Sayı: Özel Sayı Sayfa Aralığı: 117 - 134 Metin Dili: İngilizce DOI: 10.47495/okufbed.1037011 İndeks Tarihi: 29-11-2023

Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels

Öz:
Pressure vessels are subjected to stresses in axial and radial directions during their service life, which causes undesirable damages. For that reason, it is highly important to design the fiber directions in composite overwrapped pressure vessels in such a way that can carry the loads occurring in both directions. In this context, composite pressure vessels with 20 mm polar opening radii were designed and the geodesic dome profile was obtained by solving the elliptic integral. Helical and hoop winding layers were used together on the cylinder surface and the effect of stacking sequence on the structural performance was examined. In the current study, numerical models with six different stacking sequences were defined and thus stress, strain and failure indexes were determined. Furthermore, the effects of hoop winding layers on the mechanical properties were investigated by comparing with the numerical model consisting of completely helical winding layers. As a result of the current study, it has been concluded that the hoop winding layers have favorable effects on mechanical properties. It has also been observed that the utilization of the hoop winding layers provides an improvement of approximately 28% in the failure index compared to the numerical model consisting of completely helical winding. Additionally, it was observed that although the stacking sequence for the hoop winding was highly effective on the interlaminar shear stress, it did not have much effect on the stress/strain results and the failure indexes.
Anahtar Kelime: Dome Profile Filament Winding Geodesic Trajectories Pressure Vessels Stacking Sequence

İstifleme Sırasının Kompozit Katmanlı Basınçlı Kaplarının Yapısal Performansına Etkileri

Öz:
Basınçlı kaplar hizmet ömürleri boyunca eksenel ve radyal yönlerde gerilmelere maruz kalmakta ve bu durum istenmeyen hasarlara neden olmaktadır. Bu sebepten dolayı kompozit katmanlı basınçlı kaplarda fiber yönlerinin her iki yönde oluşan yükleri taşıyabilecek şekilde tasarlanması oldukça önemlidir. Bu kapsamda 20 mm kutup ağzı yarıçapına sahip kompozit basınçlı kaplar tasarlanmış ve eliptik integral çözülerek jeodezik kubbe profili elde edilmiştir. Silindir yüzeyinde helisel ve çember sargı tabakaları bir arada kullanılmış ve istifleme sırasının yapısal performansa etkileri incelenmiştir. Bu çalışmada altı farklı istif sırasına sahip sayısal modeller tanımlanmış ve böylece gerilme, gerinim ve kırılma indeksleri belirlenmiştir. Ayrıca, tamamen helisel sarım katmanlardan oluşan sayısal model ile karşılaştırılarak, çember sarım tabakaların mekanik özellikler üzerindeki etkileri araştırılmıştır. Mevcut çalışma sonucunda, çember sarım tabakaların mekanik özellikler üzerinde olumlu etkileri olduğu sonucuna varılmıştır. Ayrıca çember sarım tabaka kullanımının tamamen helisel sarımdan oluşan sayısal modele kıyasla hasar indeksinde yaklaşık %28 iyileşme sağladığı gözlemlenmiştir. Ek olarak, çember sarım tabakalar için istifleme sırasının katmanlar arası kayma gerilmesi üzerinde oldukça etkili olduğu fakat gerilme/gerinim sonuçları ile hasar indeksleri üzerinde çok fazla etkili olmadığı gözlemlenmiştir.
Anahtar Kelime: Kubbe Profili Filaman Sarım Jeodezik Yörünge Basınç Kapları İstif Sırası

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • Cai, Q., Pu, X., Dan, L., & Li, X. (2019, December). Comparative Study on Multi-type Domes of Filament-Wound Composite Pressure Vessels. In IOP Conference Series: Materials Science and Engineering (Vol. 677, No. 2, p. 022062). IOP Publishing.
  • Elmar, W., & Bernhard, J. (2015). Composites Market Report 2014. AVK, dostęp: www. beaware. org. uk.
  • Gemi, L. (2014). Düşük hızlı darbe hasarlı filaman sarım hibrid boruların iç basınç altında yorulma davranışı. Doktara Tezi, Selçuk Üniversitesi Fen Bilimleri Enstitiüsü, Konya.
  • Gemi, L. (2018). Investigation of the effect of stacking sequence on low velocity impact response and damage formation in hybrid composite pipes under internal pressure. A comparative study. Composites Part B: Engineering, 153, 217-232.
  • Gemi, L., Tarakçioğlu, N., Akdemir, A., & Şahin, Ö. S. (2009). Progressive fatigue failure behavior of glass/epoxy (±75) 2 filament-wound pipes under pure internal pressure. Materials & Design, 30(10), 4293-4298.
  • Hocine, A., Chapelle, D., Boubakar, M. L., Benamar, A., & Bezazi, A. (2009). Experimental and analytical investigation of the cylindrical part of a metallic vessel reinforced by filament winding while submitted to internal pressure. International journal of pressure vessels and piping, 86(10), 649-655.
  • Kabir, M. Z. (2000). Finite element analysis of composite pressure vessels with a load sharing metallic liner. Composite structures, 49(3), 247-255.
  • Kumar, S. S., & Kumari, A. S. (2012). Design and Failure analysis of Geodesic Dome of a Composite Pressure vessel. International Journal of Engineering Research and Technology, 1(2270-0181).
  • Nebe, M., Asijee, T. J., Braun, C., van Campen, J. M. J. F., & Walther, F. (2020). Experimental and analytical analysis on the stacking sequence of composite pressure vessels. Composite Structures, 247, 112429.
  • Oromiehie, E., Prusty, B. G., Compston, P., & Rajan, G. (2019). Automated fibre placement based composite structures: Review on the defects, impacts and inspections techniques. Composite Structures, 224, 110987.
  • Özbek, Ö., Bozkurt, Ö. Y., & Erkliğ, A. (2019). An experimental study on intraply fiber hybridization of filament wound composite pipes subjected to quasi-static compression loading. Polymer Testing, 79, 106082.
  • Park, Y. H., & Sakai, J. (2020). Optimum design of composite pressure vessel structure based on 3-dimensional failure criteria. International Journal of Material Forming, 13(6), 957-965.
  • Prabhakar, M. M., Rajini, N., Ayrilmis, N., Mayandi, K., Siengchin, S., Senthilkumar, K., ... & Ismail, S. O. (2019). An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability. Composite Structures, 230, 111419.
  • Takeichi, N., Senoh, H., Yokota, T., Tsuruta, H., Hamada, K., Takeshita, H. T., ... & Kuriyama, N. (2003). “Hybrid hydrogen storage vessel”, a novel high-pressure hydrogen storage vessel combined with hydrogen storage material. International Journal of Hydrogen Energy, 28(10), 1121-1129.
  • Taşyürek, M., & Tarakçioğlu, N. (2017). Enhanced fatigue behavior under internal pressure of CNT reinforced filament wound cracked pipes. Composites Part B: Engineering, 124, 23-30.
  • Yao, S. S., Jin, F. L., Rhee, K. Y., Hui, D., & Park, S. J. (2018). Recent advances in carbon-fiber-reinforced thermoplastic composites: A review. Composites Part B: Engineering, 142, 241-250.
  • Züttel, A. (2003). Materials for hydrogen storage. Materials today, 6(9), 24-33.
  • Zwillinger, D. (1998). Handbook of differential equations (Vol. 1). Gulf Professional Publishing.
APA COSKUN T, Şahin Ö (2022). Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. , 117 - 134. 10.47495/okufbed.1037011
Chicago COSKUN TANER,Şahin Ömer Sinan Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. (2022): 117 - 134. 10.47495/okufbed.1037011
MLA COSKUN TANER,Şahin Ömer Sinan Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. , 2022, ss.117 - 134. 10.47495/okufbed.1037011
AMA COSKUN T,Şahin Ö Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. . 2022; 117 - 134. 10.47495/okufbed.1037011
Vancouver COSKUN T,Şahin Ö Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. . 2022; 117 - 134. 10.47495/okufbed.1037011
IEEE COSKUN T,Şahin Ö "Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels." , ss.117 - 134, 2022. 10.47495/okufbed.1037011
ISNAD COSKUN, TANER - Şahin, Ömer Sinan. "Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels". (2022), 117-134. https://doi.org/10.47495/okufbed.1037011
APA COSKUN T, Şahin Ö (2022). Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online), 5(Özel Sayı), 117 - 134. 10.47495/okufbed.1037011
Chicago COSKUN TANER,Şahin Ömer Sinan Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) 5, no.Özel Sayı (2022): 117 - 134. 10.47495/okufbed.1037011
MLA COSKUN TANER,Şahin Ömer Sinan Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online), vol.5, no.Özel Sayı, 2022, ss.117 - 134. 10.47495/okufbed.1037011
AMA COSKUN T,Şahin Ö Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online). 2022; 5(Özel Sayı): 117 - 134. 10.47495/okufbed.1037011
Vancouver COSKUN T,Şahin Ö Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online). 2022; 5(Özel Sayı): 117 - 134. 10.47495/okufbed.1037011
IEEE COSKUN T,Şahin Ö "Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels." Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online), 5, ss.117 - 134, 2022. 10.47495/okufbed.1037011
ISNAD COSKUN, TANER - Şahin, Ömer Sinan. "Effects Of Stacking Sequence on the Structural Performance of Composite Overwrapped Pressure Vessels". Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) 5/Özel Sayı (2022), 117-134. https://doi.org/10.47495/okufbed.1037011