Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy
Yıl: 2016 Cilt: 3 Sayı: 3 Sayfa Aralığı: 87 - 91 Metin Dili: Türkçe İndeks Tarihi: 29-07-2022
Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy
Öz: Amaç: Bu çalışmanın amacı Er:YAG lazer uygulamasının Cr-Co alaşım ve akrilik rezin arasındaki bağlantıya etkisinin araştırılmasıdır. Gereç ve Yöntemler: Toplamda 36 adet 2 kare şeklinde metal alaşım test örneği hazırlanmıştır (10x10x3 mm). Örnekler rastgele 3 farklı yüzey işlemi grubuna ayrılmıştır (n=12). Yüzey işlemi uygulanmamış grup kontrol grubu, Al2O3 ile kumlanmış grup ve Er:YAG lazer uygulanmış grup olarak ayrılmıştır. 4 mm genişliğinde ve 5 mm yüksekliğinde otopolimerizan akrilik rezin metal örneklere uygulanmıştır. Yapıştırılan örnekler distile suda 24 saat 37°C' de bekletilmiştir. Daha sonra üniversal test makinesinin yükleme ucuna yerleştirilmiş ve 0.05 mm/dk hız ile kopana kadar itme uygulanmıştır. Data istatistiksel olarak analiz edilmiştir. Bulgular: Üç test grubu arasında en yüksek bağlantı değerleri kumlanmış örneklerde elde edilmiştir. Lazer uygulanmış test örnekleri kontrol grubundan istatistiksel olarak daha yüksek değerler gösterse de kumlanmış örneklerden daha düşük değerler göstermiştir. Sonuç: Metal alaşım ve akrilik rezin arasında bağlantı dayanımının güçlendirilmesi için lazer uygulaması Al2O3 ile kumlamadan daha etkili değildir.
Anahtar Kelime: Konular:
Er:YAG lazer uygulamasının Cr-Co alaşımı ve polimetil metakrilat arasındaki makaslama bağlantı kuvveti üzerine etkisi
Öz: Background: The aim of the present study is to investigate the effect of Er:YAG laser treatment on bond strength between Cr-Co alloy and the acrylic resin. Methods: A total of 36 square-shaped metal alloy test specimens (10x10x3 mm) were prepared. Specimens of each alloy were randomly divided into three treatment groups (n=12). Specimens, left untreated were grouped as control, air abraded with Al2O3 and Er-YAG laser irradiated. Autopolymerized resin discs of 4 mm diameter and 5 mm in height were fabricated and aplicated on alloy specimens. The bonded specimens were stored in distilled water for 24 hours at 37°C in a humidor. They were then mounted in a loading jig and debonded in shear using a universal testing machine at a cross-head speed of 0.05 mm/min. The data were statistically analyzed. Results: Among the three test groups the highest bonding values were obtained in sandblasted test specimens. Although, laser irradiated test specimens showed significantly higher test results compared with control group, they showed lower values than sandblasted test specimens. Conclusion: Laser treatment is not effective as Al2O3 sandblasting
Anahtar Kelime: Konular:
Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- Akova T, Ucar Y, Tukay A, Balkaya MC, Brantley WA, 2008. Comparison of the bond strength of laser- sintered and cast base metal dental alloys to porcelain. Dent Mater, 24(10), 1400-1404.
- Arcoria CJ, Lippas MG, Vitasek BA, 1993. Enamel surface roughness analysis after laser ablation and acid-etching. J Oral Rehabil, 20(2),213-224.
- Banerjee S, Engelmeier RL, O'Keefe KL, Powers JM, 2009. In vitro tensile bond strength of denture repair acrylic resins to primed base metal alloys using two different processing techniques. J Prosthodont, 18(8),676-683.
- Behr M, Leibrock A, Stich W, Rammelsberg P, Rosentritt M, Handel G, 1998. Adhesive-fixed partial dentures in anterior and posterior areas. Results of an on-going prospective study begun in 1985. Clin Oral Investig, 2(1), 31-35.
- Cernavin I, Hogan SP, 1999. The effects of the Nd:YAG laser on amalgam dental restorative material. Aust Dent J, 44(2), 98-102.
- Hansson O, 1994. Clinical results with resin-bonded prostheses and an adhesive cement. Quintessence Int, 25(2), 125-132.
- Kalra S, Kharsan V, Kalra NM, 2015. Comparative evaluation of effect of metal primer and sandblasting on the shear bond strength between heat cured acrylic denture base resin and cobalt-chromium alloy: An in vitro study. Contemp Clin Dent, 6(3), 386-391.
- Kern M, Thompson VP, 1993. Sandblasting and silica- coating of dental alloys: volume loss, morphology and changes in the surface composition. Dent Mater, 9(3), 151-61.
- Kim-Hai N, Esquivel-Upshaw J, Clark AE, 2003. Surface treatments to improve bond strength in removable partial dentures. Gen Dent, 51(5), 402-404.
- Livaditis GJ, 1986. A chemical etching system for creating micromechanical retention in resin-bonded retainers. J Prosthet Dent, 56(2), 181-188.
- Mazurat RD, Pesun S, 1998. Resin-metal bonding systems: a review of the Silicoating and Kevloc systems. J Can Dent Assoc, 64(7),503-507.
- Murray AK, Attrill DC, Dickinson MR, 2005. The effects of XeCl laser etching of Ni-Cr alloy on bond strengths to composite resin: a comparison with sandblasting procedures. Dent Mater, 21(6), 538-544.
- NaBadalung DP, Powers JM, Connelly ME, 1998. Comparison of bond strengths of three denture base resins to treated nickel-chromium-beryllium alloy. J Prosthet Dent, 80(3), 354-361.
- Ohkubo C, Watanabe I, Hosoi T, Okabe T, 2000. Shear bond strengths of polymethyl methacrylate to cast titanium and cobalt-chromium frameworks using five metal primers. J Prosthet Dent, 83(1), 50-57.
- Ohno H, Araki Y, Sagara M, Yamane Y, 1986. The adhesion mechanism of dental adhesive resin to the alloy. Experimental evidence of the deterioration of bonding ability due to adsorbed water on the oxide layer. Dent Mater J, 5(2), 211-216.
- Oskoee PA, Kachoei M, Rikhtegaran S, Fathalizadeh F, Navimipour EJ, 2012. Effect of surface treatment with sandblasting and Er,Cr:YSGG laser on bonding of stainless steel orthodontic brackets to silver amalgam. Med Oral Patol Oral Cir Bucal, 17(2), e292- 296.
- Sadat Madani A, Astaneh PA, Shahabi S, Nakhaei MR, Bagheri HG, Chiniforush N, 2013. Influence of different power outputs of intraoral Nd:YAG laser on shear bond strength of a resin cement to nickel-chromium dental alloy. Lasers Med Sci, 28(1), 229-234.
- Shiu P, De Souza-Zaroni WC, Eduardo Cde P, Youssef MN, 2007. Effect of feldspathic ceramic surface treatments on bond strength to resin cement. Photomed Laser Surg, 25(4), 291-296.
- Tanaka T, Fujiyama E, Shimizu H, Takaki A, Atsuta M, 1986. Surface treatment of nonprecious alloys for adhesion-fixed partial dentures. J Prosthet Dent 55(4), 456-462.
- Watanabe F, Powers JM, Lorey RE, 1988. In vitro bonding of prosthodontic adhesives to dental alloys. J Dent Res, 67(2), 479-483.
- Yoshida K, Kamada K, Atsuta M, 1999. Adhesive primers for bonding cobalt-chromium alloy to resin. J Oral Rehabil 26(6), 475-488.
- Zurasky JE, Duke ES, 1987. Improved adhesion of denture acrylic resins to base metal alloys. J Prosthet Dent, 57(4), 520-524.
| APA | DURAN İ, URAL Ç, SARI M, YÜZBAŞIOĞLU E, yılmaz b, KAVUT İ (2016). Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. , 87 - 91. |
| Chicago | DURAN İbrahim,URAL Çağrı,SARI M.Erhan,YÜZBAŞIOĞLU Emir,yılmaz betül,KAVUT İdris Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. (2016): 87 - 91. |
| MLA | DURAN İbrahim,URAL Çağrı,SARI M.Erhan,YÜZBAŞIOĞLU Emir,yılmaz betül,KAVUT İdris Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. , 2016, ss.87 - 91. |
| AMA | DURAN İ,URAL Ç,SARI M,YÜZBAŞIOĞLU E,yılmaz b,KAVUT İ Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. . 2016; 87 - 91. |
| Vancouver | DURAN İ,URAL Ç,SARI M,YÜZBAŞIOĞLU E,yılmaz b,KAVUT İ Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. . 2016; 87 - 91. |
| IEEE | DURAN İ,URAL Ç,SARI M,YÜZBAŞIOĞLU E,yılmaz b,KAVUT İ "Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy." , ss.87 - 91, 2016. |
| ISNAD | DURAN, İbrahim vd. "Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy". (2016), 87-91. |
| APA | DURAN İ, URAL Ç, SARI M, YÜZBAŞIOĞLU E, yılmaz b, KAVUT İ (2016). Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. Selcuk Dental Journal, 3(3), 87 - 91. |
| Chicago | DURAN İbrahim,URAL Çağrı,SARI M.Erhan,YÜZBAŞIOĞLU Emir,yılmaz betül,KAVUT İdris Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. Selcuk Dental Journal 3, no.3 (2016): 87 - 91. |
| MLA | DURAN İbrahim,URAL Çağrı,SARI M.Erhan,YÜZBAŞIOĞLU Emir,yılmaz betül,KAVUT İdris Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. Selcuk Dental Journal, vol.3, no.3, 2016, ss.87 - 91. |
| AMA | DURAN İ,URAL Ç,SARI M,YÜZBAŞIOĞLU E,yılmaz b,KAVUT İ Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. Selcuk Dental Journal. 2016; 3(3): 87 - 91. |
| Vancouver | DURAN İ,URAL Ç,SARI M,YÜZBAŞIOĞLU E,yılmaz b,KAVUT İ Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy. Selcuk Dental Journal. 2016; 3(3): 87 - 91. |
| IEEE | DURAN İ,URAL Ç,SARI M,YÜZBAŞIOĞLU E,yılmaz b,KAVUT İ "Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy." Selcuk Dental Journal, 3, ss.87 - 91, 2016. |
| ISNAD | DURAN, İbrahim vd. "Effect of Er-YAG laser application on shear bond strength of polymethyl methacrylate to Cr-Co Alloy". Selcuk Dental Journal 3/3 (2016), 87-91. |
