Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme

KILIÇKAP, EROL; ÇELİK, Yahya Hışman

Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme

Yahya Hışman ÇELİK, (Batman Üniversitesi, Mühendislik Mimarlık Fakültesi, Makine Mühendisliği Bölümü, Batman)

Erol KILIÇKAP (Dicle Üniversitesi, Makine Mühendisliği Bölümü, Diyarbakır)

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji

6 2

Yıl: 2018 Cilt: 6 Sayı: 1 Sayfa Aralığı: 163 - 175 Metin Dili: Türkçe İndeks Tarihi: 29-07-2022

Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme

Öz:

Titanyum ve alaşımları, mükemmel ısı direnci, korozyon direnci, tokluk, mukavemet, yüksek çalışma sıcaklığı ve düşük ağırlık oranına sahip oldukları için uzay-havacılık, otomotiv, kimyapetrokimya ve biyomedikal gibi çeşitli endüstrilerde yüksek mühendislik alaşımları olarak kullanılmaktadırlar. Ancak bu alaşımlar düşük işlenebilirlik derecelerine sahiptirler. Titanyum ve alaşımlarının işlenmesinde yüzey bütünlüğü ve kesici takım aşınması gibi problemlerle karşılaşılmaktadır. Bu çalışmada, titanyum ve alaşımlarının delinmesinde, frezelenmesinde ve tornalanmasında kesici takım malzemeleri, aşınma mekanizmaları, kesme kuvvetleri, yüzey pürüzlülükleri gibi konular gözden geçirilmiştir. Ayrıca, bu alaşımların işlenmesinde karşılaşılan zorluklar değerlendirilmiş olup yapılmış literatür çalışmaları ayrıntılı olarak ele alınmıştır

Anahtar Kelime:

Challenges Encountered in the Machining of Ti-6Al-4V from Titanium Alloys: Review

Öz:

Titanium and its alloys are used as high engineering alloys in various industries such as aerospace, automotive, chemical-petrochemical and biomedical because they have excellent heat resistance, corrosion resistance, toughness, strength, high working temperature and low weight ratio. However, these alloys have low machinability. In the machining of titanium and its alloys, problems such as surface integrity and cutting tool wear are encountered. In this study, subjects such as cutting tools, wear mechanisms, cutting forces, surface roughness are examined in drilling, milling and turning of titanium and its alloys. In addition, the difficulties encountered in the machining of these alloys have been evaluated and the literature studies have been discussed as detail

Anahtar Kelime:

Belge Türü: Makale Makale Türü: Derleme Erişim Türü: Erişime Açık

[1] Y. Çakar, Toz enjeksiyon kalıplama ile üretilmiş Ti-6Al-4V parçalarda işlem, yapı ve özellik ilişkileri, Yüksek Lisans Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, 2006.
[2] C. İçdem, Saf titanyum ve Ti-6Al-4V, Ti-6Al-7Nb alaşımlarının akışkan yatak ortamında termal oksidasyonu, Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi Fen Bilimleri Enstitüsü, 2007.
[3] M. Nouari, H. Makich, Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys: Ti-6Al-4V and Ti-555, International Journal of Refractory Metalsand Hard Materials, 41 (2013), 259-269.
[4] K.H. Park, A. Beal, D. Kim, P. Know, J. Lantrip, Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools, Wear, 271 (2011), 2826-2835.
[5] A. Farias, G.F. Batalha, E.F. Prados, R. Magnabosco, S. Delijaicov, Tool wear evaluations in friction stir processing of commercial titanium Ti-6Al-4V, Wear, 302 (2013), 1327-1333.
[6] F.R. Wong, S. Sharif, K. Kamdani, E.A. Rahim, The effect of drill point geometry and drilling technique on tool life when drilling titanium alloy, Ti-6Al-4V, Proceedings of International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21-23 May, Johor Bahru, Malaysia, 2008.
[7] S. Ramesh, L. Karunamoorthy, K. Palanikumar, Surface roughness analysis in machining of titanium alloy, Materials and Manufacturing Processes, 23 (2008), 174-181.
[8] R. Komanduri, W.R. Reed, Evaluation of carbide grades and a new cutting geometry for machining titanium alloys, Wear, 92 (1983), 113-123.
[9] J.R. Myers, H.B. Bomberger, F.H. Froes, Corrosion behavior and use of titanium and its alloys, Journal of Metals, 36 (1984), 50-60.
[10] F.H. Froes, H.B. Bomberger, The beta titanium alloys, Journal of Metals, 36 (1985), 55-62.
[11] Metals Handbook, Properties and Selection, Stainles Steels, Tool Materials and Special-Putrpose Metals, ASM, Volum 3, 9th edition, 1980.
[12] T. Minton, S. Ghani, F. Sammler, R. Bateman, P. Füstmann, M. Roeder, Temperature of internallycooled diamond-coated tools for dry-cutting titanium, International Journal of Machine Tools & Manufacture, 75 (2013), 27-35.
[13] A.R. Machado, J. Wallbank, Machining of titanium and its alloys-a review, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 204 (1990), 53-60.
[14] P.D. Harvey, Engineering properties of steel, ASM, Metals Park, OH, ISBN: 0871701448, 1982.
[15] Y. Şahin, Talas Kaldırma Prensipleri 2, Nobel Yayın Dağıtım, Ankara, 2001.
[16] N.T. Mathew, L. Vijayaraghavan, Drilling of titanium aluminide at different aspect ratio under dry and wet conditions, Journal of Manufacturing Processes, 24 (2016), 256–269.
[17] S. Chatterjee, S.S. Mahapatra, K. Abhishek, Simulation and optimization of machining parameters in drilling of titanium alloys, Simulation Modelling Practice and Theory, 62 (2016), 31–48.
[18] Z. Zhu, S. Sui, J. Sun, J., Li, Y. Li, Investigation on performance characteristics in drilling of Ti6Al4V alloy, International Journal of Advanced Manufacturing Technology, doi: 10.1007/s00170- 017-0508-6, 2017.
[19] N.T. Mathew, L. Vijayaraghavan, High-throughput dry drilling of titanium aluminide, Materials and Manufacturing Processes, 32 (2017), 199-208.
[20] I. Lazoğlu, G. Poulachon, C. Ramirez, M. Akmal, B. Marcon, F. Rossi, J. Outeiro, M. Krebs, Thermal analysis in Ti-6Al-4V drilling, CIRP Annals - Manufacturing Technology, http://dx.doi.org/10.1016/j.cirp.2017.04.020, 2017.
[21] M. Darsin, T. Pasang, Z. Chen, Performance of TiAlN PVD Coated Carbide Drill when Drilling Titanium 6246 Alloy, MATEC Web of Conferences, doi: 10.1051/matecconf/20171090200, 2017.
[22] Y. Su, D.D. Chen, L. Gong, 3D Finite Element Analysis of Drilling of Ti-6Al-4V Alloy, International Conference on Computer Information Systems and Industrial Applications CISIA 2015, 907-911, 2015
[23] H. Li, G. He, X. Qi, G. Wang, C. Lu, L. Gui, Tool wear and hole quality investigation in dry helical milling of Ti-6Al-4V alloy, International Journal of Advanced Manufacturing Technology, 71 (2014), 1511–1523.
[24] P.A. Rey, J LeDref, Y. Landon, Modelling of cutting forces in orbital drilling of titanium alloy Ti– 6Al–4V, International Journal of Machine Tools & Manufacture, 106 (2016), 75–88.
[25] H. Safari, S. Sharif, S. Izham, H. Jafari, Surface integrity characterization in high-speed dry end milling of Ti-6Al-4V titanium alloy, International Journal of Advanced Manufacturing Technology, 78 (2015), 651–657.
[26] M.G. Faga, P.C. Priarone, M. Robiglio, L. Settineri, V. Tebaldo, Technological and Sustainability Implications of Dry, Near-Dry, and Wet Turning of Ti-6Al-4V Alloy, Internatıonal Journal of Precision Engineering and manufacturing-Green Technology, 4 (2017), 129-139.
[27] Z. Pan, D.S. Shih, A. Tabei, H. Garmestani, S.Y. Liang, Modeling of Ti-6Al-4V machining force considering material microstructure evolution, International Journal of Advanced Manufacturing Technology, doi: 10.1007/s00170-016-9964-7, 2017.
[28] D. Nguyen, D. Kang, T. Bieler, K. Park, P. Known, Microstructural impact on flank wear during turning of various Ti-6Al-4V alloys, Wear, 384–385 (2017), 72–83.
[29] D. Carou, E.V. Rubio, B. Agostina, R. Teti, Sustainable turning of the Ti-6Al-4V alloy at low feed rates: surface quality assessment, Procedia Manufacturing, 8 (2017), 769-774.
[30] M.A.M. Ali, A.I. Azmi, A.N.M. Khalil, K.W. Leong, Experimental study on minimal nanolubrication with surfactant in the turning of titanium alloys, International Journal of Advanced Manufacturing Technology, doi: 10.1007/s00170-017-0133-4, 2017
[31] D. Arulkirubakaran, V. Senthilkumar, Performance of TiN and TiAlN coated micro-grooved tools during machining of Ti-6Al-4V alloy, International Journal of Refractory Metals and Hard Materials, 62 (2017), 47–57.
[32] M. Rancic, C. Colin, M. Sennour, J-P. Costes, G. Poulachon, Microstructural Investigations of the White and Deformed Layers Close to the Turned Surface of Ti-6Al-4V, Metallurgical and Materials Transactions A, 48A (2017), 389-402.
[33] Y. Chen, R. Sun, Y. Gao, J. Leopold, A nested-ANN prediction model for surface roughness considering the effects of cutting forces and tool vibrations, Measurement, 98 (2017), 25–34.
[34] M.K. Gupta, P.K. Sood, Surface roughness measurements in NFMQL assisted turning of titanium alloys: An optimization approach, Friction, 5 (2017), 155–170.
[35] M. Bar-Hen, I. Etsion, Experimental study of the effect of coating thickness and substrate roughness on tool wear during turning, Tribology International, 110 (2017), 341–347.
[36] Y.H. Çelik, H. Yildiz, C. Özek, Effect of cutting parameters on workpiece and tool properties during drilling of Ti-6Al-4V, Materials Testing, 58 (2016), 519-525.
[37] M. Balaji, K.V. Rao, N.M. Rao, B.S.N. Murthy, Optimization of drilling parameters for drilling of TI-6Al-4V based on surface roughness, flank wear and drill vibration, Measurement, 114 (2018), 332–339.
[38] T. Özel, A. Olleak, T. Thepsonthi, Micro milling of titanium alloy Ti-6Al-4V: 3-D finite element modeling for prediction of chip flow and burr formation, Production Engineering, 11 (2017), 435– 444.
39] A.M. Khorasani, I. Gibson, M. Goldberg, G. Littlefair, A comprehensive study on surface quality in 5-axis milling of SLM Ti-6Al-4V spherical components, International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-017-1048-9.
[40] Y.H. Çelik, A. Karabiyik, Effect of cutting parameters on machining surface and cutting tool in milling of Ti-6Al-4V alloy, Indian Journal of Engineering & Materials Sciences, 23 (2016), 349-356.
[41] M. Mia, N.R. Dhar, Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy, Journal of Materials Processing Technology, 252 (2018), 688–696.
[42] M.S. Dargusch, S. Sun, J.W. Kim, T. Li, P. Trimby, J. Cairney, Effect of tool wear evolution on chip formation during dry machining of Ti-6Al-4V alloy, International Journal of Machine Tools and Manufacture, 126 (2018), 13-17.
[43] M. Ahmadi, Y. Karpat, O. Acar, Y.E. Kalay, Microstructure effects on process outputs in micro scale milling of heat treated Ti6Al4V titanium alloys, Journal of Materials Processing Technology, 252 (2018), 333–347.
[44] Y.H. Çelik, E. Kilickap, M. Güney, Investigation of cutting parameters affecting on tool wear and surface roughness in dry turning of Ti-6Al-4V using CVD and PVD coated tools, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (2017), 2085-2093.
[45] R. Li, A.J. Shih, Tool temperature in titanium drilling, Journal of Manufacturing Science and Engineering, 129 (2007), 740-749.
[46] T. Kıvak, U. Şeker, The effect of coating materials and cutting conditions on the cutting forces in the drilling of Ti-6Al-4V alloy, International Iron& Steel Symposium, Karabük-Turkey, April 02–04, 855–860, 2012.
[47] E.A. Rahim, H. Sasahara, A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys, Tribology International, 44 (2011), 309–317.
[48] J. Pujana, A. Rivero, A. Celaya, L.N. López de Lacalle, Analysis of utrasonic-assisted drilling of Ti6Al4V, International Journal of Machine Tools &Manufacture, 49 (2009), 500–508.
[49] M. SenthilKumar, A. Parabukarthi, V. Krishnaraj, Study on tool wear and chip formation during drilling carbon fiber rainforced polymer (CFRP)/titanium alloy (Ti-6Al-4V) stacks, Procedia Engineering, 64 (2013), 582-592.
[50] Y.H. Guu, S. Deng, M. Ti-KunangHou, C.H. Hsu, K.S. Tseng, Optimization of machining parameters for stress concentration in micro drilling of titanium alloy, Materials and Manufacturing Processes, 27 (2012), 207–213.
[51] O. Isbilir, E. Ghassemieh, Finite element analysis of drilling of titanium alloy, ICM11, Procedia Engineering, 10 (2011), 1877–1882, 2011.
[52] J.L. Cantero, M.M. Tardío, J.A. Canteli, M. Marcos, M.H. Miguélez, Dry drilling of alloy Ti-6Al4V, International Journal of Machine Tools &Manufacture, 45 (2005), 1246-1255, 2005.
[53] I.S. Shyha, S.L. Soo, D.K. Aspinwall, S. Bradley, R. Perry, P. Harden, S. Dawson, Hole quality assessment following drilling of metallic-composite stacks, International Journal of Machine Tools & Manufacture, 51 (2011), 569–578.
[54] E. Feldshtein, The influence of machining condition on burr shapes when drilling reach-through holes in difficult-to-cut materials, Advanced in Manufacturing Science and Technology, 35 (2011), 75-8
55] D. Biermann, H. Hartmann, Reduction of burr formation in drilling using cryogenic process cooling, 45th CIRP Conference on Manufacturing System, Procedia CIRP 3 (2012), 85–90.
[56] Z.G. Wang, M. Rahman, Y.S. Wong, Tool wear characteristics of binderless CBN tools used in highspeed milling of titanium alloys, Wear, 258 (2005), 752-758.
[57] A.R. Zareena, S.C. Veldhuis, Tool wear mechanisms and tool life enhancement in ultra-precision machining of titanium, Journal of Materials Processing Technology, 212 (2012), 560-570.
[58] T. Thepsonthi, T. Özel, Experimental and finite element simulation besed investigations on micromilling Ti-6Al-4V titanium alloy: Effect of cBN coating on tool wear, Journal of Materials Processing Technology, 213 (2013), 532-542.
[59] L.N. López de lacalle, J. Pérez, J.I. Llorente, J.A. Sánchez, Advanced cutting condition for he milling of aeronautical alloys, Journal of Materials Processing Technology, 100 (2000), 1-11.
[60] P. Bach, G. Trmal, P. Zeman, J. Vana, J. Maly, High performance titanium milling at low cutting speed, Procedia CIRP, 1 (2012), 226-231.
[61] E. Ünal, F. Karaca, Ti-6Al-4V alaşımının dik işlem merkezli CNC tezgahında işlenebilirliğinin araştırılması, Doğu Anadolu Bölgesi Araştırılmaları, 6 (2007), 135-139.
[62] M. Armendia, P. Osborne, A. Garay, J. Belloso, S. Turner, P.J. Arrazola, Influence of heat treatment on the machinability of titanium alloy, Materials and Manufacturing Processes, 27 (2012), 457-461.
[63] N. Muthukrishnan, P. Davim, Influence of coolant in machinability of titanium alloy (Ti-6Al-4V), Journal of Surface Engineered Materials and Advanced Technology, 1 (2011), 9-14.
[64] S. Ramesh, L. Karunamoorthy, K. Palanikumar, Fuzzy modeling and analysis of machining parameters in machining titanium alloy, Materials and Manufacturing Processes, 23 (2008), 439-447.
[65] N. Andriya, Dry machining of Ti-6Al-4V using PVD coated TiAlN tools, Proceedings of the World Congress on Engineering (WCE2012), 3, 4-6 July London, U.K, 2012.
[66] Y. Zhang, Z. Zhou, J. Wang, X. Li, Diamond tool wear in precision turning of titanium alloy, Materials and Manufacturing Processes, 28 (2013), 1061-1064

APA	ÇELİK Y, KILIÇKAP E (2018). Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. , 163 - 175.
Chicago	ÇELİK Yahya Hışman,KILIÇKAP EROL Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. (2018): 163 - 175.
MLA	ÇELİK Yahya Hışman,KILIÇKAP EROL Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. , 2018, ss.163 - 175.
AMA	ÇELİK Y,KILIÇKAP E Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. . 2018; 163 - 175.
Vancouver	ÇELİK Y,KILIÇKAP E Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. . 2018; 163 - 175.
IEEE	ÇELİK Y,KILIÇKAP E "Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme." , ss.163 - 175, 2018.
ISNAD	ÇELİK, Yahya Hışman - KILIÇKAP, EROL. "Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme". (2018), 163-175.

APA	ÇELİK Y, KILIÇKAP E (2018). Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 6(1), 163 - 175.
Chicago	ÇELİK Yahya Hışman,KILIÇKAP EROL Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 6, no.1 (2018): 163 - 175.
MLA	ÇELİK Yahya Hışman,KILIÇKAP EROL Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, vol.6, no.1, 2018, ss.163 - 175.
AMA	ÇELİK Y,KILIÇKAP E Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. 2018; 6(1): 163 - 175.
Vancouver	ÇELİK Y,KILIÇKAP E Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. 2018; 6(1): 163 - 175.
IEEE	ÇELİK Y,KILIÇKAP E "Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme." Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 6, ss.163 - 175, 2018.
ISNAD	ÇELİK, Yahya Hışman - KILIÇKAP, EROL. "Titanyum Alaşımlarından Ti-6Al-4V’nın İşlenmesinde Karşılaşılan Zorluklar: Derleme". Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 6/1 (2018), 163-175.