Yıl: 2018 Cilt: 24 Sayı: 7 Sayfa Aralığı: 1257 - 1261 Metin Dili: Türkçe DOI: 10.5505/pajes.2018.56492 İndeks Tarihi: 12-09-2019

Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri

Öz:
Doğal lif takviyeli kompozit malzemeler çevre dostu, ucuz vesürdürülebilir malzemeler olması bakımından endüstride pek çokkullanım alanı bulmaktadır. Bu çalışmada jüt lifi takviyeli ve mantaresaslı sandviç kompozitler üretilerek viskoelastik özellikleriincelenmiştir. Bu amaçla öncelikle jüt lifi/polipropilen (PP) karışımıdokusuz yüzey (nonwoven) kumaşlar ve PP granül kullanılarak incejüt/PP kompozit plakalar üretilmiştir. Üretilen bu plakalar bir adetmantar levhanın alt ve üst yüzeyine konumlandırılarak basınç altındabirleştirilmiş ve sandviç yapılar oluşturulmuştur. Üretilen sandviçyapıların viskoelastik özelliklerini belirlemek amacıyla dinamikmekanik analiz (DMA) testi gerçekleştirilmiştir. Kompozit üretimindenönce liflere uygulanan sodyum hidroksit (NaOH) işleminin kompozitmekanik özelliklerini geliştirdiği gözlemlenmiştir. Üretilen sandviçkompozitlerin inşaat sektöründe yalıtım malzemesi olarak ve ofis alanayırma panellerinde, aynı zamanda otomotiv endüstrisinde kullanımıamaçlanmaktadır.
Anahtar Kelime:

Viscoelastic properties of natural fiber reinforced cork based sandwich composites

Öz:
Natural fiber reinforced composite materials have found many applications in various industries due to the fact that they are nature- friendly, low-cost and sustainable materials. In this study, jute fiber reinforced and cork based sandwich composites were produced and their viscoelastic properties were investigated. First, thin jute/polypropylene (PP) composite plates were produced by using jute/PP nonwoven fabrics and PP granules. Then these plates were placed on top and bottom faces of a cork plate and consolidated under pressure to produce sandwich composites. Dynamic mechanical analysis (DMA) was performed to determine the viscoelastic properties of the produced samples. It was found that sodium hydroxide (NaOH) treatment of fibers before composite preparation lead to higher mechanical properties of the composites. The produced sandwich composites can be used in construction industry as insulation materials and office partition panels as well as in automotive industry
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Derleme Erişim Türü: Erişime Açık
  • Bledzki AK, Gassan J. “Composites reinforced with cellulose based fibres”. Progress in Polymer Science (Oxford), 24(2), 221-274, 1999.
  • Mohanty AK, Misra M, Hinrichsen G. “Biofibres, biodegradable polymers and biocomposites: An overview”. Macromolecular Materials and Engineering, 276-2771-24, 2000.
  • Faruk O, Bledzki AK, Fink HP, Sain M. “Biocomposites reinforced with natural fibers: 2000-2010”. Progress in Polymer Science, 37(11), 1552-1596, 2012.
  • Bledzki AK, Faruk O, Sperber VE. “Cars from bio-fibres”. Macromolecular Materials and Engineering, 291(5), 449-457, 2006.
  • Mehta G, Mohanty AK, Thayer K, Misra M, Drzal LT. “Novel biocomposites sheet molding compounds for low cost housing panel applications”. Journal of Polymers and the Environment, 13(2), 169-175, 2005.
  • Wambua P, Ivens J, Verpoest I. “Natural fibres: Can they replace glass in fibre reinforced plastics?”. Composites Science and Technology, 63(9), 1259-1264, 2003.
  • Joshi S V., Drzal LT, Mohanty AK, Arora S. “Are natural fiber composites environmentally superior to glass fiber reinforced composites?”. Composites Part A: Applied Science and Manufacturing, 35(3), 371-376, 2004.
  • Onal L, Karaduman Y. “Mechanical characterization of carpet waste natural fiber-reinforced polymer composites”. Journal of Composite Materials, 43(16), 1751-1768, 2009.
  • Karaduman Y, Onal L. “Water absorption behavior of carpet waste jute-reinforced polymer composites”. Journal of Composite Materials, 45(15), 1559-1571, 2011.
  • De Fatima V. Marques M, Melo RP, Da S. Araujo R, Do N. Lunz J, De O, Aguiar V. “Improvement of mechanical properties of natural fiber-polypropylene composites using successive alkaline treatments”. Journal of Applied Polymer Science, 132(12), 1-12, 2015.
  • Siddika S, Mansura F, Hasan M, Hassan A. “Effect of reinforcement and chemical treatment of fiber on The Properties of jute-coir fiber reinforced hybrid polypropylene composites”. Fibers and Polymers, 15(5), 1023-1028, 2014.
  • Sudha S, Thilagavathi G. “Effect of alkali treatment on mechanical properties of woven jute composites”. Journal of the Textile Institute, 107(6), 691-701, 2016.
  • Sudha S, Thilagavathi G. “Analysis of electrical, thermal and compressive properties of alkali-treated jute fabric reinforced composites”. Journal of Industrial Textiles, 47(6), 1407-1423, 2018.
  • Lakshmanan A, Ghosh RK, Dasgupta S, Chakraborty S, Ganguly PK. “Optimization of alkali treatment condition on jute fabric for the development of rigid biocomposite”. Journal of Industrial Textiles, 47(5), 640-655, 2018.
  • Shanmugam D, Thiruchitrambalam M. “Influence of alkali treatment and layering pattern on the tensile and flexural properties of Palmyra palm leaf stalk fiber (PPLSF)/jute fiber polyester hybrid composites”. Composite Interfaces, 21(1), 3-12, 2014.
  • Zafar MT, Maiti SN, Ghosh AK. “Effect of surface treatment of jute fibers on the interfacial adhesion in poly(lactic acid)/jute fiber biocomposites”. Fibers and Polymers, 17(2), 266-274, 2016.
  • Sathishkumar S, Suresh A V, Nagamadhu M, Krishna M. “The effect of alkaline treatment on their properties of Jute fiber mat and its vinyl ester composites”. Materials Today: Proceedings, 4(2, Part A), 3371-3379, 2017.
  • Gunti R, Ratna Prasad A V., Gupta AVSSKS. “Preparation and properties of successive alkali treated completely biodegradable short jute fiber reinforced PLA composites”. Polymer Composites, 37(7), 2160-2170, 2016.
  • Rana a K, Mitra BC, Banerjee a N. “Short jute fiber- reinforced polypropylene composites: Dynamic mechanical study”. Journal of Applied Polymer Science, 71(4), 531-539, 1999.
  • Ray D, Sarkar BK, Das S, Rana AK. “Dynamic mechanical and thermal analysis of vinylester-resin-matrix composites reinforced with untreated and alkali-treated jute fibres”. Composites Science and Technology, 62(7-8), 911-917, 2002.
  • Karaduman Y, Onal L. “Dynamic mechanical and thermal properties of enzyme-treated jute/polyester composites”. Journal of Composite Materials, 47(19), 2361-2370, 2013.
  • Shanmugam D, Thiruchitrambalam M. “Static and dynamic mechanical properties of alkali treated unidirectional continuous Palmyra Palm Leaf Stalk Fiber/jute fiber reinforced hybrid polyester composites”. Materials and Design, 50(1), 533-542, 2013.
  • Karaduman Y, Sayeed MMA, Onal L, Rawal A. “Viscoelastic properties of surface modified jute fiber/polypropylene nonwoven composites”. Composites Part B: Engineering, 67(1), 111-118, 2014.
  • Saha P, Manna S, Chowdhury SR, Sen R, Roy D, Adhikari B. “Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment”. Bioresource Technology, 101(9), 3182-3187, 2010.
  • Joseph P, Mathew G, Joseph K, Groeninckx G, Thomas S. “Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites”. Composites Part A Applied Science and Manufacturing, 34(3), 275-290, 2003.
APA Karaduman Y (2018). Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. , 1257 - 1261. 10.5505/pajes.2018.56492
Chicago Karaduman Yekta Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. (2018): 1257 - 1261. 10.5505/pajes.2018.56492
MLA Karaduman Yekta Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. , 2018, ss.1257 - 1261. 10.5505/pajes.2018.56492
AMA Karaduman Y Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. . 2018; 1257 - 1261. 10.5505/pajes.2018.56492
Vancouver Karaduman Y Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. . 2018; 1257 - 1261. 10.5505/pajes.2018.56492
IEEE Karaduman Y "Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri." , ss.1257 - 1261, 2018. 10.5505/pajes.2018.56492
ISNAD Karaduman, Yekta. "Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri". (2018), 1257-1261. https://doi.org/10.5505/pajes.2018.56492
APA Karaduman Y (2018). Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 24(7), 1257 - 1261. 10.5505/pajes.2018.56492
Chicago Karaduman Yekta Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 24, no.7 (2018): 1257 - 1261. 10.5505/pajes.2018.56492
MLA Karaduman Yekta Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol.24, no.7, 2018, ss.1257 - 1261. 10.5505/pajes.2018.56492
AMA Karaduman Y Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi. 2018; 24(7): 1257 - 1261. 10.5505/pajes.2018.56492
Vancouver Karaduman Y Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi. 2018; 24(7): 1257 - 1261. 10.5505/pajes.2018.56492
IEEE Karaduman Y "Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri." Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 24, ss.1257 - 1261, 2018. 10.5505/pajes.2018.56492
ISNAD Karaduman, Yekta. "Doğal lif takviyeli mantar esaslı sandviç kompozitlerin viskoelastik özellikleri". Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi 24/7 (2018), 1257-1261. https://doi.org/10.5505/pajes.2018.56492