The effect of time delay of fluid flow in a vascularized plate
Yıl: 2018 Cilt: 4 Sayı: 3 Sayfa Aralığı: 161 - 167 Metin Dili: İngilizce DOI: 10.17515/resm2017.33ds1025 İndeks Tarihi: 10-10-2019
The effect of time delay of fluid flow in a vascularized plate
Öz: In this study, we show the effect of time delay of coolant fluid flow into avascularized plate on the peak temperature. Coolant flows along vascular channelswhich were embedded in a rectangular plate. Two kinds of vascular channeldesigns were investigated experimentally: parallel and tree-shaped. In the study,the peak temperatures were monitored and the coolant was pumped when thepeak temperature reaches to 50°C, 70°C and 90°C. The performance comparisonof two distinct designs is based on two criteria: the time required for the steadystate condition after the coolant is pumped and the peak temperature after thesteady state condition is conformed. The results show that the time required toreach steady-state condition increases as the time delay increases. The paralleland tree-shaped designs show similar performance (time required to reach steadystate) with slightly improved performance in the tree-shaped design as the presettemperature for time delay increases. For instance, 4% decrease in the timerequired to reach steady-state with the tree-shaped design relative to the paralleldesign was achieved when the preset temperature for time delay is 90°C.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- Shafahi M, Bianco V, Vafai K, Manca O. Thermal performance of flat-shaped heat pipes using nanofluids. International Journal of Heat and Mass Transfer, 2010; 53: 1438-1445. https://doi.org/10.1016/j.ijheatmasstransfer.2009.12.007
- Li Y, Xie HQ, Yu W, Li J. Liquid cooling of tractive lithium ion batteries pack with nanofluids coolant. Journal of Nanoscience and Nanotechnology, 2015; 15(4): 3206-3211. https://doi.org/10.1166/jnn.2015.9672
- Alshaer WG, Nada, SA, Rady MA, Del Barrio EP, Sommier A. Thermal management of electronic devices using carbon foam and PCM/nano-composite. International Journal of Thermal Sciences, 2015; 89: 79-86. https://doi.org/10.1016/j.ijthermalsci.2014.10.012
- Ma T, Yang HX, Zhang YP, Lu L, Wang X. Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook. Renewable and Sustainable Energy Reviews, 2015; 43: 1273-1284. https://doi.org/10.1016/j.rser.2014.12.003
- Cetkin E, Lorente S, Bejan A. Vascularization for cooling a plate heated by a randomly moving source. Journal of Applied Physics, 2012; 112(8): 084906, 2012.
- Cetkin E, Lorente S, Bejan A. Vascularization for cooling and mechanical strength. International Journal of Heat and Mass Transfer, 2011; 54(13-14): 2774-2781. https://doi.org/10.1016/j.ijheatmasstransfer.2011.02.061
- Wang KM, Lorente S, Bejan A. Vascular materials cooled with grids and radial channels. International Journal of Heat and Mass Transfer, 2009; 52(5-6): 1230-1239. https://doi.org/10.1016/j.ijheatmasstransfer.2008.08.027
- Cho KH. Fluid flow and heat transfer in vascularized cooling plates. International Journal of Heat and Mass Transfer, 2010; 53(19-20): 3607-3614. https://doi.org/10.1016/j.ijheatmasstransfer.2010.03.027
- Rocha LAO, Lorente S, Bejan A. Tree-shaped vascular wall designs for localized intense cooling. International Journal of Heat and Mass Transfer, 2009; 52(19-20): 4535-4544. https://doi.org/10.1016/j.ijheatmasstransfer.2009.03.003
- Cetkin E, Lorente S, Bejan A. Hybrid grid and tree structures for cooling and mechanical Strength. Journal of Applied Physics, 2011; 110(6): 064910. https://doi.org/10.1063/1.3626062
- Cho KH, Lee J, Ahn HS, Bejan A, Kim MH. Fluid flow and heat transfer in vascularized cooling plates. International Journal of Heat and Mass Transfer, 2010; 53: 3607-3614. https://doi.org/10.1016/j.ijheatmasstransfer.2010.03.027
- Cho KH, Chang WP, Kim MH. A numerical and experimental study to evaluate performance of vascularized cooling plates. International Journal of Heat and Fluid Flow, 2011; 32: 1186- 1198, 2011. https://doi.org/10.1016/j.ijheatfluidflow.2011.09.006
- White SR, Sottos NR, Geubelle PH, Moore JS, Kessler MR, Sriram SR, Brown EN, Viswanathan S. Autonomic healing of polymer composites. Nature, 2001; 409: 794-797. https://doi.org/10.1038/35057232
- Hamilton AR, Sottos NR, White SR. Self-healing of internal damage in synthetic vascular materials. Advanced Materials, 2010; 22(45): 5159-5163. https://doi.org/10.1002/adma.201002561
- Bejan A, Lorente S, Wang KM. Networks of channels for self-healing composite materials. Journal of Applied Physics, 2006; 100(3): 033528. https://doi.org/10.1063/1.2218768
- Wang KM, Lorente S, Bejan A. Vascular structures for volumetric cooling and mechanical Strength. Journal of Applied Physics, 2010; 107(4): 044901. https://doi.org/10.1063/1.3294697
- Rocha LAO, Lorente S, Bejan A. Vascular design for reducing hot spots and stresses. Journal of Applied Physics, 2014; 115(17): 174904. https://doi.org/10.1063/1.4874220
- Cetkin E, Lorente S, Bejan A. Vascularization for cooling and reduced thermal stresses. International Journal of Heat and Mass Transfer, 2015; 80: 858-864. https://doi.org/10.1016/j.ijheatmasstransfer.2014.09.027
- Yenigun O, Cetkin E. Experimental and numerical investigation of constructal vascular channels for self-cooling: Parallel channels, tree-shaped and hybrid designs. International Journal of Heat and Mass Transfer, 2016; 103: 1155-1165. https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.074
- Bejan A, Lorente S. Design with Constructal Theory, John Wiley & Sons, 2008. https://doi.org/10.1002/9780470432709
| APA | YENİGÜN O, coskun t, ÇETKİN E (2018). The effect of time delay of fluid flow in a vascularized plate. , 161 - 167. 10.17515/resm2017.33ds1025 |
| Chicago | YENİGÜN Onur,coskun turgay,ÇETKİN Erdal The effect of time delay of fluid flow in a vascularized plate. (2018): 161 - 167. 10.17515/resm2017.33ds1025 |
| MLA | YENİGÜN Onur,coskun turgay,ÇETKİN Erdal The effect of time delay of fluid flow in a vascularized plate. , 2018, ss.161 - 167. 10.17515/resm2017.33ds1025 |
| AMA | YENİGÜN O,coskun t,ÇETKİN E The effect of time delay of fluid flow in a vascularized plate. . 2018; 161 - 167. 10.17515/resm2017.33ds1025 |
| Vancouver | YENİGÜN O,coskun t,ÇETKİN E The effect of time delay of fluid flow in a vascularized plate. . 2018; 161 - 167. 10.17515/resm2017.33ds1025 |
| IEEE | YENİGÜN O,coskun t,ÇETKİN E "The effect of time delay of fluid flow in a vascularized plate." , ss.161 - 167, 2018. 10.17515/resm2017.33ds1025 |
| ISNAD | YENİGÜN, Onur vd. "The effect of time delay of fluid flow in a vascularized plate". (2018), 161-167. https://doi.org/10.17515/resm2017.33ds1025 |
| APA | YENİGÜN O, coskun t, ÇETKİN E (2018). The effect of time delay of fluid flow in a vascularized plate. Research on Engineering Structures and Materials, 4(3), 161 - 167. 10.17515/resm2017.33ds1025 |
| Chicago | YENİGÜN Onur,coskun turgay,ÇETKİN Erdal The effect of time delay of fluid flow in a vascularized plate. Research on Engineering Structures and Materials 4, no.3 (2018): 161 - 167. 10.17515/resm2017.33ds1025 |
| MLA | YENİGÜN Onur,coskun turgay,ÇETKİN Erdal The effect of time delay of fluid flow in a vascularized plate. Research on Engineering Structures and Materials, vol.4, no.3, 2018, ss.161 - 167. 10.17515/resm2017.33ds1025 |
| AMA | YENİGÜN O,coskun t,ÇETKİN E The effect of time delay of fluid flow in a vascularized plate. Research on Engineering Structures and Materials. 2018; 4(3): 161 - 167. 10.17515/resm2017.33ds1025 |
| Vancouver | YENİGÜN O,coskun t,ÇETKİN E The effect of time delay of fluid flow in a vascularized plate. Research on Engineering Structures and Materials. 2018; 4(3): 161 - 167. 10.17515/resm2017.33ds1025 |
| IEEE | YENİGÜN O,coskun t,ÇETKİN E "The effect of time delay of fluid flow in a vascularized plate." Research on Engineering Structures and Materials, 4, ss.161 - 167, 2018. 10.17515/resm2017.33ds1025 |
| ISNAD | YENİGÜN, Onur vd. "The effect of time delay of fluid flow in a vascularized plate". Research on Engineering Structures and Materials 4/3 (2018), 161-167. https://doi.org/10.17515/resm2017.33ds1025 |
