AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ

Merve KÖSEOĞLU, (Diğer)
Funda BAYINDIR, (Atatürk Üniversitesi)
Özlem ÖZBAYRAM, (Diğer)
Alper ÖZDOĞAN (Atatürk Üniversitesi)
Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi
4 0
Yıl: 2018 Cilt: 28 Sayı: 3 Sayfa Aralığı: 377 - 384 Metin Dili: Türkçe İndeks Tarihi: 06-12-2019

AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ

Öz:
Amaç: Çalışmada, tutucu oluklu ve oluksuz akrilikrezin dişlerin farklı kaide materyallerine bağlanmadayanımlarına tamir materyallerinin etkisininincelenmesi amaçlanmıştır.Gereç ve Yöntem: Çalışma kapsamında 30 adet ısıile polimerize olan PMMA (polimetilmetakrilat) ve 30adet poliamid olmak üzere toplam 60 adet disk şeklindekaide materyali kullanıldı. Tamir materyali olarak;ısı ile polimerize olan PMMA, otopolimerize PMMA veışık ile polimerize olan tamir materyalleri kullanıldı.Ayrıca tutucu oluklu ve oluksuz olmak üzere toplam 60adet akrilik rezin diş kullanıldı. Örneklerin bağlanmadayanımları universal test cihazında 1 mm/dk hızlaölçüldü. Verilerin istatistiksel değerlendirilmesi iki yönlüvaryans analizi (ANOVA) testi ile yapıldı.Bulgular: Poliamid kaide maddesi grubunda; ışıklapolimerize olan tamir materyali grubunda bağlanmadayanımı, ısıyla polimerize olan PMMA ve otopolimerizePMMA gruplarından istatistiksel olarak anlamlı derecedefarklı bulunmuştur (p<0.001). Isıyla polimerizeolan PMMA grubunda; ışıkla polimerize olan tamirmateryalinin en yüksek, otopolimerize PMMA' nın iseen düşük bağlanma dayanımı değerlerine sahip olduğugörülmekle beraber gruplar arasında istatistiksel olarakanlamlı farklılık bulunamamıştır (p>0.05). Poliamid kaidemateryalinin ışıkla sertleşen tamir materyali alt grubuhariç bütün gruplarda dişlerin oluklu veya oluksuzolmasının bağlanma dayanımını istatistiksel olarakanlamlı derecede etkilemediği görülmüştür (p>0.05).Sonuç: Çalışma sonucunda, farklı tamir materyalleriakrilik dişlerin farklı kaide materyallerine bağlanmadayanımlarını etkilediği anlaşılmıştır.
Anahtar Kelime:

Konular: Diş Hekimliği

EVALUATION THE BOND STRENGTH OF ACRYLIC RESIN DENTURE TEETH TO DIFFERENT BASE MATERIALS

Öz:
Aim Aim: The objective of this study was to evaluate the effect of different repair materials on bond strength of denture teeth with/ without retention grooves to different base materials. Materials and Methods: 30 heat-cured PMMA and 30 polyamide; totally 60 disc- shaped base materials were used in this study. As repair materials; heatcured PMMA, autopolymerising PMMA, light-cured denture resin repair materials were used. Also 60 acrylic resin denture teeth with/ without retention groove were used. The bonding strengths of the samples were measured at a speed of 1 mm / min on a universal test machine. The data obtained were statistically analyzed with two way-ANOVA. Results: In polyamide denture base group, shear bond strengths of light cured denture resin repair material was statistically higher than heat- cured PMMA and autopolymerising PMMA groups (p<0.001). Similarly in heat- cured PMMA denture base group, shear bond strength of light cured denture repair material was higher than autopolymerising PMMA and heat- cured PMMA subgroups but there was no statistically significant difference between subgroups (p>0.05). Retention groove of denture teeth doesn't affect subgroup's shear bond strengths significantly except the polyamide base material repaired with light- cured denture resin (p>0.05). Conclusion: It was denture repair materials tested in this study affect bond strength of denture teeth to different base materials.
Anahtar Kelime:

Konular: Diş Hekimliği
Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • Craig RG, Powers JM. Restorative Dental Materials. 11th ed. St Louis; Mo, Mosby: 2002. p. 636-89.
  • Ali IL, Yunus N, Abu-Hassan MI. Hardness, Flexural Strength, and Flexural Modulus Comparisons of Three Differently Cured Denture Base Systems. J Prosthodont 2008; 17: 545-9.
  • Athar Z, Juszczyk AS, Radford DR, Clark RK. Effect of Curing Cycles on The Mechanical Properties of Heat cured Acrylic Resins. Eur J Prosthodont Restor Dent 2009; 17: 58-60.
  • O’Bricn WJ. Dental Material and Their Selection. 4th ed. Chicago: Quintessence Publishing Co, Inc: 2008. p. 75- 90, 91-113.
  • Watt DM. Clinical Assessment of Nylon as a Partial Denture Base Material. Br Dent J 1955; 98: 238–44.
  • Munns D. Nylon as a Denture Base Material. Dent Pract 1962; 18: 142-6.
  • Hargreaves AS. Nylon as a Denture-base Material. Dent Pract Dent Rec. 1971; 22: 122-8.
  • Yokoyama N, Machi H, Hayashi K, Uchida T, Ono T, Nokubi T. Physical Properties of Polyamide Resin (nylon group) as a Polymeric Material for Dentures: Part 2. Surface Hardness and Tensile Strength. J Nippon Acad Dent Technol 2004; 25: 87–92.
  • Machi H, Hayashi K, Yokoyama N, Uchida T, Ono T, Nokubi T. Physical Properties of Polyamide Resin (nylon group) as a Polymeric Material for Dentures: Part 3. Flexural Properties and Fatigue Characteristics. J Nippon Acad Dent Technol 2004; 25: 93–9.
  • Satoh Y, Maruo T, Nagai E, Ohtani K, Akita N, Ema S. Studies on a Superpolyamide for Denture Base: Surface Roughness. J Dent Pract Adm 2005; 39: 352- 7.
  • Matthews E, Smith DC. Nylon as a Denture Base Material. Br Dent J 1955; 98: 231–7.
  • MacGregor AR, Graham J, Stafford GD, Huggett R. Recent Experiences with Denture Polymers. J Dent 1984; 12: 146-57.
  • Stafford GD, Huggett R, MacGregor AR, Graham J. The Use of Nylon as a Denture-base Material. J Dent 1986; 14: 18-22.
  • Yunus N, Rashid AA, Azmi LL, Abu-Hassan MI. Some Flexural Properties of a Nylon Denture Base Polymer. J Oral Rehabil 2005; 32: 65-71.
  • Thean HP, Chew CL, Goh KI. Shear Bond Strength of Denture Teeth to Base: A Comparative Study. Quintessence Int. 1996; 27: 425-8.
  • Bahrani F, Khaledi AAR. Effect of Surface Treatments on Shear Bond Strength of Denture Teeth to Denture Base Resins. Dent Res J. 2014; 11: 114- 8.
  • Huggett R, John G, Jagger RG, Bates JF. Strength of The Acrylic Denture Base Tooth Bond. Br Dent J 1982; 153: 187-90.
  • Spratley MH. An Investigation of the Adhesion of Acrylic Resin Teeth to Dentures. J Prosthet Dent 1987; 58: 389-92.
  • Cunningham JL. Bond Strength of Denture Teeth to Acrylic Bases. J Dent 1993; 21: 274-80.
  • Prombonas A, Vlissidis D. Effects of Position of Artificial Teeth and Load Levels on Stress in the Complete Dentures. J Prosthet Dent 2002; 88: 415-22.
  • Se´o RS, Neppelenbroek KH, Filho JA. Factors Affecting the Strength of Denture Repairs. J Prosthodont 2007; 16: 302-10.
  • Stipho HD, Stipho AS. Effectiveness and Durability of Repaired Acrylic Resin Joints. J Prosthet Dent 1987; 58: 249- 53.
  • Dyer RA, Howlett JA. Dimensional Stability of Denture Bases Following Repair with Microwave Resin. J Dent 1994;22: 236-241.
  • Chung RWC, Clark RK, Darvell BW. Bonding of Cold-cured Acrylic Resin to Acrylic Denture Teeth. Aust Dent J. 1995; 40: 241-5.
  • Vallittu PK. Bonding of Resin Teeth to the Polymethyl metacrylate Denture Base Material. Acta Odontol Scand 1995; 53: 99-104.
  • Cunninghan JL. Shear Bond Strength of Resin Teeth to Heat-cured and Light-cured Denture Base Resin. J Oral Rehabil 2000; 27: 312-6.
  • Takahashi Y, Chai J, Takahashi T, Habu T. Bond Strength of Denture Teeth to Denture Base Resins. Int J Prosthodont 2000; 13: 59-65.
  • Cunninghan JL, Benington IC. An Investigation of the Variables Which May Affect the Bond Between Plastic Teeth and Denture Base Resin. J Dent 1999; 27: 129-35.
  • Deguchi R. Polyamide 6. Japan Plastics 1990; 41: 35- 41.
  • Vojdani M, Rezaei S, Zareeian L. Effect of Chemical Surface Treatments and Repair Material on Transverse Strength of Repaired Acrylic Denture Resin. Indian J Dent Res 2008; 19: 2-5.
  • Vojdani M, Giti R. Polyamide as a Denture Base Material: A Literature Review J Dent Shiraz Univ Med Sci 2015; 16: 1-9.
  • Parvizi A, Lindquist T, Schneider R, Williamson D, Boyer D, Dawson DV. Comparison of the Dimensional Accuracy of Injection-molded Denture Base Materials to That of Conventional Pressure-pack Acrylic Resin. J Prosthodont 2004; 13: 83-9.
  • Yeşil Duymuş Z, Holoğlu B, Alkurt M. Poliamid Yapıdaki Protez Kaide Materyali ile Hareketli Bölümlü Protez Yapımı: İki Vaka Sunumu. Derg. J Dent Fac Atatürk Uni 2012; 22: 185-90.
  • Polyzois GL, Tarantili PA, Frangou MJ, Andereopoulos AG. Fracture Force, Deflection at Fracture, and Toughness of Repaired Denture Resin Subjected to Microwave Polymerization or Reinforced with Wire or Glass Fiber. J Prosthet Dent 2001; 86: 613-9.
  • Berge M. Bending Strength of Intact and Repaired Denture Base Resins. Acta Odontol Scand 1983; 41: 187-91.
  • Rached RN, Powers JM, Del Bel Cury AA. Repair Strength of Autopolymerizing, Microwave and Conventional Heatpolymerized Acrylic resins. J Prosthet Dent 2004; 92: 79-82.
  • Leong A, Grant AA. The Transverse Strength of Repairs in Polymethyl methacrylate. Aust Dent J 1971; 16: 232-4.
  • Foo SH, Lindquist TJ, Aquilino SA, Schneider RL, Williamson DL, Boyer DB. Effect of Polyaramid Fiber Reinforcement on The Strength of 3 Denture Base Polymethyl methacrylate Resins. J Prosthodont 2001; 10: 148-53.
  • Hayakawa I, Nagao M, Matsumoto T, Masuhara E. Properties of a New Light-polymerized Relining Material. Int J Prosthodont 1990; 3: 278-84.
  • Ogle RE, Sorensen SE, Lewis EA. A New Visible Light-cured Resin System Applied to Removable Prosthodontics. J Prosthet Dent 1986; 56: 497- 506.
  • Andreopoulos AG, Polyzois GL, Demetriou PP. Repairs with Visible Light-curing Denture Base Materials. Quintessence Int 1991; 22: 703-6.
  • Dar-Odeh NS, Harrison A, Abu-Hammad O. An Evaluation of Self-cured and Visible light-cured Denture Materials When Used as a Denture Base Repair Material. J Oral Rehabil 1997; 24: 755-60.
  • Stipho HD, Talic YF. Repair of Denture Base Resins with Visible Light-polymerized Reline Material: Effect on Tensile and Shear Bond Strengths. J Prosthet Dent 2001; 86: 143-8.
  • Razavi R, Khan Z, Von Fraunhofer JA. The Bond Strength of a Visible Light-cured Reline Resin to Acrylic Resin Denture Base Material. J Prosthet Dent 1990; 63: 485-7.
  • Lewinstein I, Zeltser C, Mayer CM, Tal Y. Transverse Bond Strength of Repaired Acrylic Resin Strips and Temperature Rise of Dentures Relined with VLC Reline Resin. J Prosthet Dent 1995; 74: 392-9.
  • Farzin M, Safari S, Vojdani M. Bond Strength and Deflection of a Hard Chair Side Reline Material to Two Denture Base Resins. J Isfahan Dent Sch 2010; 6: 195-202.
  • Katsumata Y, Hojo S, Hamano N, Watanabe T, Yamaguchi H, Okada S, Teranaka T,Ino S. Bonding Strength of Autopolymerizing Resin to Nylon Denture Base Polymer. Dent Mater J 2009; 28: 409-18.
  • Firas AF, Ghazwan AA, Ali AM. Evaluation of Transverse and Tensile Bond Strength of Repaired Nylon Denture Base Material by Heat, Cold and Visible Light Cure Acrylic Resin. J Bagh Coll Dentistry 2013; 25: 1-5.
  • Dhiman RK, Chowdhury SK. Midline Fracture in Single Maxillary Complete Acrylic vs. Flexible Denture. Med J Armed Forces India 2009; 65: 141-5.
  • Aljudy HJ, Hussein AN, Safi IN. Effect of Surface Treatments and Thermocycling on Shear Bond Strength of Various Artificial Teeth with Different Denture Base Materials. J Bagh Coll Dentistry 2013; 25: 5-13.
  • Negrutiu M, Sinescu C, Romanu M, Pop D, Laktos S. Thermoplastic Resins for Flexible Framework Removable Partial Dentures. Temisoara Med J 2005; 55: 295-9.
  • Consani RLX, Mesquita MF, Manesco IM, CorrerSobrinho L. Sinhoreti Mac. Effect of Microwave Treatment on the Shear Bond Strength of the Denture Tooth/Acrylic Resin. J Adhesion 2008; 84: 937-48.
APA Köseoğlu M, BAYINDIR F, ÖZBAYRAM Ö, Ozdogan A (2018). AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. , 377 - 384.
Chicago Köseoğlu Merve,BAYINDIR FUNDA,ÖZBAYRAM Özlem,Ozdogan Alper AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. (2018): 377 - 384.
MLA Köseoğlu Merve,BAYINDIR FUNDA,ÖZBAYRAM Özlem,Ozdogan Alper AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. , 2018, ss.377 - 384.
AMA Köseoğlu M,BAYINDIR F,ÖZBAYRAM Ö,Ozdogan A AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. . 2018; 377 - 384.
Vancouver Köseoğlu M,BAYINDIR F,ÖZBAYRAM Ö,Ozdogan A AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. . 2018; 377 - 384.
IEEE Köseoğlu M,BAYINDIR F,ÖZBAYRAM Ö,Ozdogan A "AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ." , ss.377 - 384, 2018.
ISNAD Köseoğlu, Merve vd. "AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ". (2018), 377-384.
APA Köseoğlu M, BAYINDIR F, ÖZBAYRAM Ö, Ozdogan A (2018). AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 28(3), 377 - 384.
Chicago Köseoğlu Merve,BAYINDIR FUNDA,ÖZBAYRAM Özlem,Ozdogan Alper AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 28, no.3 (2018): 377 - 384.
MLA Köseoğlu Merve,BAYINDIR FUNDA,ÖZBAYRAM Özlem,Ozdogan Alper AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, vol.28, no.3, 2018, ss.377 - 384.
AMA Köseoğlu M,BAYINDIR F,ÖZBAYRAM Ö,Ozdogan A AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2018; 28(3): 377 - 384.
Vancouver Köseoğlu M,BAYINDIR F,ÖZBAYRAM Ö,Ozdogan A AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2018; 28(3): 377 - 384.
IEEE Köseoğlu M,BAYINDIR F,ÖZBAYRAM Ö,Ozdogan A "AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ." Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 28, ss.377 - 384, 2018.
ISNAD Köseoğlu, Merve vd. "AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ". Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 28/3 (2018), 377-384.
Sayfa Oluşturulma Tarihi
23-04-2024 9:28

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları