The determination of optimum thermal insulation thickness for external walls of laying hen houses

Yıl: 2019 Cilt: 34 Sayı: 3 Sayfa Aralığı: 327 - 335 Metin Dili: İngilizce DOI: 10.7161/ omuanajas.592579 İndeks Tarihi: 13-04-2020

The determination of optimum thermal insulation thickness for external walls of laying hen houses

Öz:
One of the main objectives of the energy strategy of any country is conservation. Thermal insulation isof utmost importance in the context of energy conservation. Therefore, this study aims to optimizeinsulation layer for the ten cities of Turkey which have the highest number of laying hens. The yearlyheating and cooling loads were determined by using degree day method. Then optimum insulationthickness, energy savings, payback periods and CO2 emission were computed for Rock wool (RW) andGlass wool (GW) insulation materials. Results indicated that the optimum thickness of insulation forRW insulation material varies between 0.046 and 0.159 m, energy savings range between 35.42% and74.56%, and payback periods were between 0.67 and 2.00 years, while for GW insulation materialoptimum insulation thickness varies from 0.045 and 0.150 m, energy savings vary in the range of42.17% and 77.72%, and payback periods were between 0.61 and 1.72 years depending on the city, andtype of fuel. The lowest CO2 emission reductions (64.79%) were obtained for İzmir with natural gas andRW insulation material are used, while the highest value (88.76%) was achieved for Kayseri with LPGand GW insulation.
Anahtar Kelime:

Konular: Ziraat Mühendisliği

Yumurta tavuğu kümeslerinin dış duvarları için optimum yalıtım kalınlığının belirlenmesi

Öz:
Bir ülkenin enerji stratejisinin temel hedeflerinden biri de enerji tasarrufudur. Isı yalıtımı enerjinin korunumun da önemli bir yere sahiptir. Bu nedenle, bu çalışma da Türkiye’de en fazla yumurta tavuğu yetiştiren on il için optimum yalıtım kalınlığının belirlenmesi amaçlanmıştır. Derece gün yöntemi kullanılarak yıllık ısıtma ve soğutma yükleri belirlendikten sonra taş yünü (RW) ve cam yünü (GW) yalıtım malzemeleri için optimum yalıtım kalınlığı, enerji tasarrufu, geri ödeme süreleri ve CO2 emisyonları hesaplanmıştır. Sonuç olarak şehir ve yakıt türüne bağlı olarak RW yalıtım malzemesi için optimum yalıtım kalınlığının 0.046 ile 0.165 m arasında, enerji tasarrufunun %35.42 ile %74.56 arasında ve geri ödeme süresinin 0.67 ile 2.00 yıl arasında olduğu, GW yalıtım malzemesi içinse optimum yalıtım kalınlığının 0.045 ile 0.150 m arasında, enerji tasarrufunun %42.17 ile %77.72 arasında ve geri ödeme süresinin 0.61 ile 1.72 yıl arasında değiştiği belirlenmiştir. CO2 emisyonundaki en düşük azalma oranı (%64.79) İzmir ili için doğalgaz ve RW yalıtım malzemesi kullanıldığı zaman, en yüksek azalma oranı ise (%88.76) LPG ve GW yalıtım malzemesi ile Kayseri'de elde edilmiştir
Anahtar Kelime:

Konular: Ziraat Mühendisliği
Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • Agra, Ö., Özgür Atayilmaz, S., Demir, H., Teke, I., 2011. Environmental impact of optimum insulation thickness in buildings, World Renewable Energy Congress-Sweden, Linköping University Electronic Press, 8-13 May, Sweden, pp. 1813-1820.
  • Aktemur, C., 2018. Determination of optimum insulation thicknesses, energy savings and environmental impacts with respect to heating and cooling degree-days for different climate regions of Turkey. International Journal of Energy Applications and Technologies, 5: 29-43.
  • Anastaselos, D., Oxizidis, S., Papadopoulos, A.M., 2017. Suitable thermal insulation solutions for Mediterranean climatic conditions: a case study for four Greek cities. Energy Efficiency, 10: 1081-1098.
  • Ashouri, M., Astaraei, F.R., Ghasempour, R., Ahmadi, M.H., Feidt, M., 2016. Optimum insulation thickness determination of a building wall using exergetic life cycle assessment. Applied Thermal Engineering, 106: 307-315.
  • Barrau, J., Ibanez, M., Badia, F., 2014. Impact of the optimization criteria on the determination of the insulation thickness. Energy and Buildings, 76: 459- 469.
  • Blokhuis, H., Veissier, I., Jones, B., Miele, M., 2013. The welfare quality® vision, Improving farm animal welfare. Springer, pp. 71-89.
  • Bolattürk, A., 2008. Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey. Building and Environment, 43: 1055-1064.
  • Çetintaş, K.F., Yılmaz, Z., 2018. A new approach to determine insulation material and thickness from a life-cycle perspective. Proceedings of the Institution of Civil Engineers-Energy, 171: 171-181.
  • Daouas, N., 2011. A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads. Applied Energy, 88: 156-164.
  • Evin, D., Ucar, A., 2019. Energy impact and ecoefficiency of the envelope insulation in residential buildings in Turkey. Applied Thermal Engineering, 154: 573-584.
  • Gelegenis, J., Axaopoulos, P., 2017. A Multi-Parametric Mathematical Approach on the Selection of Optimum Insulation Thicknesses in Buildings. Buildings, 7 (15): 1-26.
  • Gürel, A.E., Daşdemir, A., 2011. Economical and enviromental effects of thermal insulation thicness in four different climatic regions of Turkey. International Journal of Renewable Energy Research, 1: 1-10.
  • Hasan, A., 1999. Optimizing insulation thickness for buildings using life cycle cost. Applied energy, 63: 115-124.
  • Holik, V., 2009. Management of laying hens to minimize heat stress. LohmannInformation, 44: 16- 29.
  • Indraganti, M., Boussaa, D., 2017. A method to estimate the heating and cooling degree-days for different climatic zones of Saudi Arabia. Building Services Engineering Research and Technology, 38: 327-350.
  • Kurekci, N.A., 2016. Determination of optimum insulation thickness for building walls by using heating and cooling degree-day values of all Turkey’s provincial centers. Energy and Buildings, 118: 197-213.
  • Legrand, A., Von Keyserlingk, M., Weary, D., 2009. Preference and usage of pasture versus free-stall housing by lactating dairy cattle. Journal of Dairy Science, 92: 3651-3658.
  • Liu, X., Chen, Y., Ge, H., Fazio, P., Chen, G., Guo, X., 2015. Determination of optimum insulation thickness for building walls with moisture transfer in hot summer and cold winter zone of China. Energy and Buildings, 109: 361-368.
  • Lucas, S., Ferreira, V., 2010. Selecting insulating building materials trough an assessment tool. Portugal SB10 sustainable building affordable to all, 745-752, 17-19 March 2010, Algavre.
  • Mahlia, T., Iqbal, A., 2010. Cost benefits analysis and emission reductions of optimum thickness and air gaps for selected insulation materials for building walls in Maldives. Energy, 35: 2242-2250.
  • Mahlia, T., Taufiq, B., Masjuki, H., 2007. Correlation between thermal conductivity and the thickness of selected insulation materials for building wall. Energy and Buildings, 39: 182-187.
  • Ozel, M., 2011. Effect of wall orientation on the optimum insulation thickness by using a dynamic method. Applied Energy, 88: 2429-2435.
  • Petrecca, G., 2014. Energy Conversion and Management. Springer.
  • Ramin, H., Hanafizadeh, P., Akhavan-Behabadi, M.A., 2016. Determination of optimum insulation thickness in different wall orientations and locations in Iran. Advances in Building Energy Research, 10: 149-171.
  • Roshan, G.R., Ghanghermeh, A., Attia, S., 2017. Determining new threshold temperatures for cooling and heating degree day index of different climatic zones of Iran. Renewable Energy, 101: 156-167.
  • USDA, F., 2016. Livestock and Poultry: World Markets and Trade. United States Department of Agriculture. Foreign Agriculture Service.
  • Vincelas, F.F.C., Ghislain, T., 2017. The determination of the most economical combination between external wall and the optimum insulation material in Cameroonian's buildings. Journal of Building Engineering, 9: 155-163.
  • Yildiz, A., Gurlek, G., Erkek, M., Ozbalta, N., 2008. Economical and environmental analyses of thermal insulation thickness in buildings. Journal of Thermal Science and Technology, 28: 25-34.
  • Yu, J., Yang, C., Tian, L., Liao, D., 2009. A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China. Applied Energy, 86: 2520-2529.
  • Yuan, J., Farnham, C., Emura, K., Alam, M.A., 2016. Proposal for optimum combination of reflectivity and insulation thickness of building exterior walls for annual thermal load in Japan. Building and Environment, 103: 228-237.
  • Zhu, P., Huckemann, V., Fisch, M.N., 2011. The optimum thickness and energy saving potential of external wall insulation in different climate zones of China. Procedia Engineering, 21: 608-616.
APA KÜÇÜKTOPCU E, CEMEK B (2019). The determination of optimum thermal insulation thickness for external walls of laying hen houses. , 327 - 335. 10.7161/ omuanajas.592579
Chicago KÜÇÜKTOPCU ERDEM,CEMEK Bilal The determination of optimum thermal insulation thickness for external walls of laying hen houses. (2019): 327 - 335. 10.7161/ omuanajas.592579
MLA KÜÇÜKTOPCU ERDEM,CEMEK Bilal The determination of optimum thermal insulation thickness for external walls of laying hen houses. , 2019, ss.327 - 335. 10.7161/ omuanajas.592579
AMA KÜÇÜKTOPCU E,CEMEK B The determination of optimum thermal insulation thickness for external walls of laying hen houses. . 2019; 327 - 335. 10.7161/ omuanajas.592579
Vancouver KÜÇÜKTOPCU E,CEMEK B The determination of optimum thermal insulation thickness for external walls of laying hen houses. . 2019; 327 - 335. 10.7161/ omuanajas.592579
IEEE KÜÇÜKTOPCU E,CEMEK B "The determination of optimum thermal insulation thickness for external walls of laying hen houses." , ss.327 - 335, 2019. 10.7161/ omuanajas.592579
ISNAD KÜÇÜKTOPCU, ERDEM - CEMEK, Bilal. "The determination of optimum thermal insulation thickness for external walls of laying hen houses". (2019), 327-335. https://doi.org/10.7161/ omuanajas.592579
APA KÜÇÜKTOPCU E, CEMEK B (2019). The determination of optimum thermal insulation thickness for external walls of laying hen houses. Anadolu Tarım Bilimleri Dergisi, 34(3), 327 - 335. 10.7161/ omuanajas.592579
Chicago KÜÇÜKTOPCU ERDEM,CEMEK Bilal The determination of optimum thermal insulation thickness for external walls of laying hen houses. Anadolu Tarım Bilimleri Dergisi 34, no.3 (2019): 327 - 335. 10.7161/ omuanajas.592579
MLA KÜÇÜKTOPCU ERDEM,CEMEK Bilal The determination of optimum thermal insulation thickness for external walls of laying hen houses. Anadolu Tarım Bilimleri Dergisi, vol.34, no.3, 2019, ss.327 - 335. 10.7161/ omuanajas.592579
AMA KÜÇÜKTOPCU E,CEMEK B The determination of optimum thermal insulation thickness for external walls of laying hen houses. Anadolu Tarım Bilimleri Dergisi. 2019; 34(3): 327 - 335. 10.7161/ omuanajas.592579
Vancouver KÜÇÜKTOPCU E,CEMEK B The determination of optimum thermal insulation thickness for external walls of laying hen houses. Anadolu Tarım Bilimleri Dergisi. 2019; 34(3): 327 - 335. 10.7161/ omuanajas.592579
IEEE KÜÇÜKTOPCU E,CEMEK B "The determination of optimum thermal insulation thickness for external walls of laying hen houses." Anadolu Tarım Bilimleri Dergisi, 34, ss.327 - 335, 2019. 10.7161/ omuanajas.592579
ISNAD KÜÇÜKTOPCU, ERDEM - CEMEK, Bilal. "The determination of optimum thermal insulation thickness for external walls of laying hen houses". Anadolu Tarım Bilimleri Dergisi 34/3 (2019), 327-335. https://doi.org/10.7161/ omuanajas.592579