Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials

Banu Sugözü, (Mersin University, Faculty of Engineering, Department of Mechanical Engineering, Mersin, Turkey)
İlker Sugözü (Mersin University, Faculty of Engineering, Department of Mechanical Engineering, Mersin, Turkey)
International Journal of Automotive Science and Technology
4 1
Yıl: 2019 Cilt: 3 Sayı: 4 Sayfa Aralığı: 71 - 76 Metin Dili: İngilizce DOI: 10.30939/ijastech..627137 İndeks Tarihi: 16-09-2020

Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials

Öz:
In this study, the usability of boron carbide as a reinforcement material infriction composites was investigated experimentally. Hence, compositesamples containing different amounts of boron carbide (5%, 10% and 15%)were produced and compared with boron carbide-free sample. Friction andwear tests were determined by a full scale brake friction tester according toTS 555 and TS 9076 standards. The hardness of the samples was calculatedby Rockwell hardness tester and the density was calculated according toArchimedes' principle. The results showed that boron carbide could be usedas a reinforcement material in friction composites.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • [1] Bijwe, J. (1997). Composites as friction materials: recent developments in non- asbestos fiber reinforced friction materials. Polymer Composites, 18, 378–396.
  • [2] Sugözü, İ. (2015). Investigation of using rice husk dust and ulexite in automotive brake pads. Materials Testing, 57, 877–882.
  • [3] Lenin Singaravelu, D., Vijay, R. and Rahul, M. (2015). Influence of Crab Shell on Tribological Characterization of Eco-Friendly Products Based Non Asbestos Brake Friction Materials. SAE Brake Colloquium & Exhibition - 33rd Annual.
  • [4] Öztürk, B. and Mutlu, T. (2016). Effects of Zinc Borate and Fly Ash on the Mechanical and Tribological Characteristics of Brake Friction Materials. Tribology Transactions, 59, 622–631.
  • [5] Aranganathan, N., Mahale, V. and Bijwe, J. (2016). Effects of aramid fiber concentration on the friction and wear characteristics of non-asbestos organic friction composites using standardized braking tests. Wear, 354–355, 69–77.
  • [6] Fei, J., Li, H. J., Fu, Y. W., Qi, L. H. and Zhang, Y. L. (2010). Effect of phenolic resin content on performance of carbon fiber reinforced paper-based friction material. Wear, 269, 534-540.
  • [7] Dadkar, N., Tomar, B. S., Satapathy, B. K. and Patnaik, A. (2010). Performance assessment of hybrid composite friction materials based on flyash – rock fibre combination. Materials and Design, 31, 723–731.
  • [8] Satapathy, B. K. and Bijwe, J. (2004). Performance of friction materials based on variation in nature of organic fibres Part I. Fade and recovery behaviour. Wear, 257, 573–584.
  • [9] Nirmal, U., Hashim, J. and Megat Ahmad, M. M. H. (2015). A review on tribological performance of natural fibre polymeric composites. Tribology International, 83, 77–104.
  • [10] Jang, H., Ko, K., Kim, S. J., Basch, R. H. and Fash, J. W. (2004). The effect of metal fibers on the friction performance of automotive brake friction materials. Wear, 256, 406–414.
  • [11] Ikpambese, K. K., Gundu, D. T. and Tuleun, L.T. (2016). Evaluation of palm kernel fibers (PKFs ) for production of asbestos-free automotive brake pads. Journal of King Saud University - Engineering Sciences 28, 110–8.
  • [12] Zhang, X., Li, K. Z., Li, H. J., Fu, Y. W. and Fei, J. (2014). Tribological and mechanical properties of glass fiber reinforced paper-based composite friction material. Tribology International, 69, 156–67.
  • [13] Qu, X., Zhang, L., Ding, H. and Liu, G. (2004). The Effect of Steel Fiber Orientation on Frictional Properties of Asbestos-Free Friction Materials. Polymer Composites, 25, 94–101.
  • [14] Öztürk, B., Arslan, F. and Öztürk, S. (2013). Effects of different kinds of fibers on mechanical and tribological properties of brake friction materials. Tribology Transactions, 56, 536–545.
  • [15] Ho, S. C., Chern Lin, J. H. and Ju, C. P. (2005). Effect of fiber addition on mechanical and tribological properties of a copper/phenolic-based friction material. Wear, 258, 861–869.
  • [16] Satapathy, B. K., Patnaik, A., Dadkar, N., Kolluri, D. K. and Tomar, B. S. (2011). Influence of vermiculite on performance of flyash-based fibre-reinforced hybrid composites as friction materials. Materials and Design, 32, 4354–4361.
  • [17] Xin, X., Xu, C. G. and Qing, L. F. (2007). Friction properties of sisal fibre reinforced resin brake composites. Wear, 262, 736–741.
  • [18] Boz, M. and Kurt, A. (2007). The effect of Al2O3 on the friction performance of automotive brake friction materials. Tribology International, 40, 1161–1169.
  • [19] Sugözü, B. (2018). Tribological properties of brake friction materials containing fly ash. Industrial Lubrication and Tribology, 70, 902–906.
  • [20] Bashir, M., Saleem, S. S. and Bashir, O. (2015). Friction and wear behavior of disc brake pad material using banana peel powder. International Journal of Research in Engineering and Technology, 4, 650–659.
  • [21] Sugözü, B., Dağhan, B. and Akdemir, A. (2018). Effect of the size on the friction characteristics of brake friction materials: a case study with Al2O3. Industrial Lubrication and Tribology, 70, 1020–1024.
  • [22] Sugözü, İ. and Kahya, K. (2018). Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads. European Mechanical Science, 2, 115–118.
  • [23] Bijwe, J. and Kumar, M. (2007). Optimization of steel wool contents in non-asbestos organic (NAO) friction composites for best combination of thermal conductivity and tribo-performance. Wear, 263, 1243–1248.
  • [24] Wannik, W. B., Ayob, A. F., Syahrullail, S., Masjuki, H. H. and Ahmad, M. F. (2012). The effect of boron friction modifier on the performance of brake pads. International Journal of Mechanical and Materials Engineering, 7, 31–35.
  • [25] Öztürk, B. and Mutlu, T. (2016). Effects of Zinc Borate and Fly Ash on the Mechanical and Tribological Characteristics of Brake Friction Materials. Tribology Transactions, 59, 622–631.
  • [26] Düzcükoğlu, H., Ekinci, Ş., Şahin, Ö. S., Avci, A., Ekrem, M. and Ünaldi, M. (2015). Enhancement of Wear and Friction Characteristics of Epoxy Resin by Multiwalled Carbon Nanotube and Boron Nitride Nanoparticles. Tribology Transactions, 58, 635–642.
  • [27] Akıncıoğlu, G., Öktem, H., Uygur, I. and Akıncıoğlu, S. (2018). Determination of Friction-Wear Performance and Properties of Eco-Friendly Brake Pads Reinforced with Hazelnut Shell and Boron Dusts. Arabian Journal for Science and Engineering, 43, 4727–4737.
  • [28] Sugozu, I., Mutlu, I. and Sugozu, B. (2018). The effect of ulexite to the tribological properties of brake lining materials. Polymer Composites, 39, 55–62.
  • [29] Sugözü, İ., Mutlu, İ. and Sugözü, B. (2016). The effect of colemanite on the friction performance of automotive brake friction materials. Industrial Lubrication and Tribology, 68, 92–98.
  • [30] Abdul Hamid, M. K., Stachowiak, G. W. and Syahrullail, S. (2013). The Effect of External Grit Particle Size on Friction Coefficients and Grit Embedment of Brake Friction Material. Procedia Engineering, 68, 7–11.
  • [31] Shin, M. W., Kim, Y. H. and Jang, H. (2014). Effect of the Abrasive Size on the Friction Effectiveness and Instability of Brake Friction Materials : A Case Study with Zircon. Tribology Letters, 55, 371–379.
  • [32] Sugözü, B., Dağhan, B., Akdemir, A. and Ataberk N. (2016). Friction and wear properties of friction materials containing nano/micro-sized SiO2 particles. Industrial Lubrication and Tribology, 68, 259–266.
  • [33] Amaren, S. G., Yawas, D. S. and Aku, S. Y. (2013). Effect of periwinkles shell particle size on the wear behavior of asbestos free brake pad. Results in Physics, 3, 109–114.
  • [34] Matějka, V., Lu, Y., Jiao, L., Huang, L., Simha, Martynková, G. and Tomášek, V. (2010). Effects of silicon carbide particle sizes on friction-wear properties of friction composites designed for car brake lining applications. Tribology International, 43, 144–151.
  • [35] Kukutschová, J., Moravec, P., Tomášek, V., Matějka, V., Smolík, J., Schwarz, J., Seidlerová, J., Šafářová, K. and Filip, P. (2011). On airborne nano/micro-sized wear particles released from low-metallic automotive brakes. Environmental Pollution, 159, 998–1006.
  • [36] Cho, K. H., Jang, H., Hong, Y. S., Kim, S. J., Basch, R. H. and Fash, J. W. (2008). The size effect of zircon particles on the friction characteristics of brake lining materials. Wear, 264, 291–297.
  • [37] TSE 555, (1992). Highway Vehicles-Brake SystemBrake Pads for Friction Brake, Ankara, Turkey.
  • [38] TS 9076, (1991). Road Vehicles- Brake LiningsEvaluation of Friction Material Characteristics- Small Sample Bench Test Procedure, Ankara, Turkey
APA Sugözü B, sugozu i (2019). Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. , 71 - 76. 10.30939/ijastech..627137
Chicago Sugözü Banu,sugozu ilker Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. (2019): 71 - 76. 10.30939/ijastech..627137
MLA Sugözü Banu,sugozu ilker Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. , 2019, ss.71 - 76. 10.30939/ijastech..627137
AMA Sugözü B,sugozu i Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. . 2019; 71 - 76. 10.30939/ijastech..627137
Vancouver Sugözü B,sugozu i Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. . 2019; 71 - 76. 10.30939/ijastech..627137
IEEE Sugözü B,sugozu i "Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials." , ss.71 - 76, 2019. 10.30939/ijastech..627137
ISNAD Sugözü, Banu - sugozu, ilker. "Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials". (2019), 71-76. https://doi.org/10.30939/ijastech..627137
APA Sugözü B, sugozu i (2019). Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. International Journal of Automotive Science and Technology, 3(4), 71 - 76. 10.30939/ijastech..627137
Chicago Sugözü Banu,sugozu ilker Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. International Journal of Automotive Science and Technology 3, no.4 (2019): 71 - 76. 10.30939/ijastech..627137
MLA Sugözü Banu,sugozu ilker Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. International Journal of Automotive Science and Technology, vol.3, no.4, 2019, ss.71 - 76. 10.30939/ijastech..627137
AMA Sugözü B,sugozu i Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. International Journal of Automotive Science and Technology. 2019; 3(4): 71 - 76. 10.30939/ijastech..627137
Vancouver Sugözü B,sugozu i Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials. International Journal of Automotive Science and Technology. 2019; 3(4): 71 - 76. 10.30939/ijastech..627137
IEEE Sugözü B,sugozu i "Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials." International Journal of Automotive Science and Technology, 3, ss.71 - 76, 2019. 10.30939/ijastech..627137
ISNAD Sugözü, Banu - sugozu, ilker. "Investigation of Friction and Wear Behavior of Boron Carbide Reinforced Composite Materials". International Journal of Automotive Science and Technology 3/4 (2019), 71-76. https://doi.org/10.30939/ijastech..627137
Sayfa Oluşturulma Tarihi
23-04-2024 13:18

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları