A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine

Yılmaz, Emre

doi:10.30939/ijastech..721882

A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine

Emre Yılmaz (Sakarya University of Applied Sciences, Department of Motor Vehicles and Transportation Technologies, 54580, Sakarya, TURKEY)

International Journal of Automotive Science and Technology

2 0

Yıl: 2020 Cilt: 4 Sayı: 2 Sayfa Aralığı: 90 - 97 Metin Dili: İngilizce DOI: 10.30939/ijastech..721882 İndeks Tarihi: 17-09-2020

A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine

Öz:

The depletion of fossil fuels as a result of excessive useage and increased environmental pollution brought up the research of environmentally conscious andrenewable alternative fuels.The alternative fuel to be considered for internalcombustion engines should not decrease the performance of the engine too muchand positively affect the exhaust emissions. It is also important that this fuelshould provide some specifications such as easy producibility, low cost, availability and usability in internal combustion engine without modification. Lowtemperature combustion modes are promising technologies providing nearly zeroNOx and soot emissions and currently a lot of researcher has focused on thistechnology. In this experimental study naphthaand RON68 was tested in anHCCI engine. In order to examine and understand the effects of the naphtha onHCCI mode a comparison study was also conducted by using RON68.Maximumimep was computed as 3.23 and 3.32 bar with RON68 and naphtha respectivelyat λ=1.7.SOC was determined 5.4 °CA and 5.76 °CA ATDC with naphtha andRON68 at λ=2.CA50 is far away from TDC fact that net work decreases. Maximum ITE was calculated as 45.42% and 46.07% at λ=2 with RON68 and naphtha respectively.

Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

[1] Maurya, R. K. (2017). Characteristics and control of low temperature combustion engines: employing gasoline, ethanol and methanol, Cham, Switzerland. Springer International Publishing AG, 2-10.
[2] International Energy Agency (2010). World energy outlook. International Energy Agency, France. isbn 978-92-64-08624- 1. www.iea.org.
[3] U.S. Energy Information Administration (2016). International energy outlook.
[4] T. S. Uyar. (2001). What is the energy problem? Is it an alternative energy solution? NEU-CEE 2001 Electrical, Electronic and Computer Engineering Symposium, 23-26, Lefkoşa TRNC.
[5] Pan, S., Liu, X., Cai, K., Li, X., Han, W., & Li, B. (2020). Experimental study on combustion and emission characteristics of iso-butanol/diesel and gasoline/diesel RCCI in a heavy-duty engine under low loads. Fuel, 261, 116434.
[6] İpci, D., Yılmaz, E., Aksoy, F., Uyumaz, A., Polat, S., & Solmaz, H. (2015). The Effects of iso-propanol and n-heptane Fuel Blends on HCCI Combustion Characteristics and Engine Performance. Electronic Journal of Machine Technologies, 12(1), 49-56.
[7] Bastawissi, H. A. E., Elkelawy, M., Panchal, H., & Sadasivuni, K. K. (2019). Optimization of the multi-carburant dose as an energy source for the application of the HCCI engine. Fuel, 253, 15-24.
[8] Solmaz, H., Kocakulak, T. (2018). Modelling of a Serial Hybrid Electric Vehicle with Spark Ignition Engine. In Proceedings on International Conference on Technology and Science, December.
[9] Kocakulak, T., Solmaz, H. (2019). Modeling of an electric vehicle and controlling the regenerative brake system with fuzzy logic method. International Symposium on Automotive Science and Technology, September.
[10]Kocakulak, T., Konukseven, E.İ., Çokgünlü, S.A. (2019). Modeling of hydro pneumatic suspension system to be used on 6x6 tactical wheeled military land platform and investigation of the effect of system elements on damping. International Symposium on Automotive Science and Technology, September.
[11]Kıyaklı, A. O. & Solmaz, H. (2018). Modeling of an electric vehicle with MATLAB/Simulink. International Journal of Automotive Science and Technology, 2(4), 9-15.
[12]Uyumaz, A. (2018). Combustion, performance and emission characteristics of a DI diesel engine fueled with mustard oil biodiesel fuel blends at different engine loads. Fuel, 212, 256- 267.
[13]Gómez, A., García-Contreras, R., Soriano, J. A., & Mata, C. (2020). Comparative study of the opacity tendency of alternative diesel fuels blended with gasoline. Fuel, 264, 116860.
[14]Sadeq, A. M., Bassiony, M. A., Elbashir, A. M., Ahmed, S. F.,Khraisheh, M. (2019). Combustion and emissions of a diesel engine utilizing novel intake manifold designs and running on alternative fuels. Fuel, 255, 115769.
[15]Ardebili, S. M. S., & Khademalrasoul, A. (2018). An analysis of liquid-biofuel production potential from agricultural residues and animal fat (case study: Khuzestan Province). Journal of cleaner production, 204, 819-831.
[16]Setiyo, M., & Waluyo, B. (2019). Mixer with secondary venturi: an invention for the first-generation LPG kits. International Journal of Automotive Science and Technology, 3(1), 21-26.
[17]Londhe, H., Luo, G., Park, S., Kelley, S. S., & Fang, T. (2019). Testing of anisole and methyl acetate as additives to diesel and biodiesel fuels in a compression ignition engine. Fuel, 246, 79-92.
[18]Keskin, A., Yaşar, A., Yıldızhan, Ş., Uludamar, E., Emen, F. M., & Külcü, N. (2018). Evaluation of diesel fuel-biodiesel blends with palladium and acetylferrocene-based additives in a diesel engine. Fuel, 216, 349-355.
[19]Halis, S., Nacak, Ç., Solmaz, H., Yilmaz, E., & Yücesu, H. S. (2018). Investigation of the effects of octane number on combustion characteristics and engine performance in a HCCI engine. Journal of Thermal Science & Technology, 38(2).
[20]Polat, S., Yücesu, H. S., Kannan, K., Uyumaz, A., Solmaz, H., &Shahbakhti, M. (2017). Experimental comparison of different injection timings in an HCCI engine fueled with nheptane. International Journal of Automotive Science and Technology, 1(1), 1-6.
[21]Rather, M. A., &Wani, M. M. (2018). A numerical study on the effects of exhaust gas recirculation temperature on controlling combustion and emissions of a diesel engine running on HCCI combustion mode. International Journal of Automotive Science and Technology, 2(3), 17-27.
[22]Uyumaz, A., Aydoğan, B., Calam, A., Aksoy, F., & Yılmaz, E. (2020). The effects of di isopropyl ether on combustion, performance, emissions and operating range in a HCCI engine. Fuel, 265, 116919.
[23]Calam, A., Aydoğan, B., & Halis, S. (2020). The comparison of combustion, engine performance and emission characteristics of ethanol, methanol, fusel oil, butanol, isopropanol and naphtha with n-heptane blends on HCCI engine. Fuel, 266, 117071.
[24]Waqas, M. U., Hoth, A., Kolodziej, C. P., Rockstroh, T., Gonzalez, J. P., & Johansson, B. (2019). Detection of low Temperature heat release (LTHR) in the standard Cooperative Fuel Research (CFR) engine in both SI and HCCI combustion modes. Fuel, 256, 115745.
[25]Gharehghani, A. (2019). Load limits of an HCCI engine fueled with natural gas, ethanol, and methanol. Fuel, 239, 1001-1014.
[26]Noguchi M, Tanaka Y, Tanaka T, Takeuchi Y, (1979). A Study on gasoline engine combustion by observation of intermediate reactive products during combustion. SAE Technical Paper. https://doi.org/10.4271/790840.
[27]Onishi S, Jo SH, Shoda K. (1979). Active ThermoAtmosphere Combustion (ATAC) – a new combustion process for internal combustion engines. SAE Trans:1851–60.
[28]Shi, H., Tang, Q., An, Y., Raman, V., Sim, J., Chang, J., Johansson, B. (2020). Study of spray/wall interaction in transition zones from HCCI via PPC to CI combustion modes. Fuel, 268, 117341.
[29]Calam, A., Solmaz, H., Yılmaz, E., & İçingür, Y. (2019). Investigation of effect of compression ratio on combustion and exhaust emissions in A HCCI engine. Energy, 168, 1208- 1216.
[30]Polat, S., Solmaz, H., Calam, A., & Yılmaz, E. Estimation of the COVIMEP Variation in a HCCI Engine. Journal of Polytechnic. DOI: 10.2339/politeknik.567865
[31]Polat, S., Solmaz, H., Yılmaz, E., Calam, A., Uyumaz, A., & Yücesu, H. S. (2019). Mapping of an HCCI engine using negative valve overlap strategy. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-15.
[32]Shim, E., Park, H., & Bae, C. (2020). Comparisons of advanced combustion technologies (HCCI, PCCI, and dual-fuel PCCI) on engine performance and emission characteristics in a heavy-duty diesel engine. Fuel, 262, 116436.
[33]Calam, A., & İçingür, Y. (2019). The effects of air fuel ratio and octane number on HCCI combustion and engine performance characteristics. Journal of Polytechnic, 22(3), 607-618.
[34]Bastawissi, H. A. E., Elkelawy, M., Panchal, H., & Sadasivuni, K. K. (2019). Optimization of the multi-carburant dose as an energy source for the application of the HCCI engine. Fuel, 253, 15-24.
[35]Putrasari, Y., Jamsran, N., & Lim, O. (2017). An investigation on the DME HCCI autoignition under EGR and boosted operation. Fuel, 200, 447-457.
[36]Kozlov, V. E., Titova, N. S., & Chechet, I. V. (2018). Modeling study of hydrogen or syngas addition on combustion and emission characteristics of HCCI engine operating on isooctane. Fuel, 221, 61-71.
[37]Poorghasemi, K., Saray, R. K., Bahlouli, K., & Zehni, A. (2016). 3D CFD simulation of a natural gas fueled HCCI engine with employing a reduced mechanism. Fuel, 182, 816- 830.
[38]Lacey, J., Kameshwaran, K., Filipi, Z., Cannella, W., & Fuentes-Afflick, P. (2014). Influence of ethanol addition in refinery stream fuels and the HCCI combustion. Fuel, 126, 122-133.
[39]Speight, J. G. (2007). The Chemistry and Technology of Petroleum Fourth Edition Preface.
[40]Wang, B., Wang, Z., Shuai, S., Yang, H., & Wang, J. (2014). Combustion and emission characteristics of Multiple Premixed Compression Ignition (MPCI) fuelled with naphtha and gasoline in wide load range. Energy conversion and management, 88, 79-87.
[41]Vallinayagam, R., An, Y., Vedharaj, S., Sim, J., Chang, J., & Johansson, B. (2018). Naphtha vs. dieseline–The effect of fuel properties on combustion homogeneity in transition from CI combustion towards HCCI. Fuel, 224, 451-460.

APA	Yılmaz E (2020). A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. , 90 - 97. 10.30939/ijastech..721882
Chicago	Yılmaz Emre A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. (2020): 90 - 97. 10.30939/ijastech..721882
MLA	Yılmaz Emre A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. , 2020, ss.90 - 97. 10.30939/ijastech..721882
AMA	Yılmaz E A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. . 2020; 90 - 97. 10.30939/ijastech..721882
Vancouver	Yılmaz E A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. . 2020; 90 - 97. 10.30939/ijastech..721882
IEEE	Yılmaz E "A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine." , ss.90 - 97, 2020. 10.30939/ijastech..721882
ISNAD	Yılmaz, Emre. "A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine". (2020), 90-97. https://doi.org/10.30939/ijastech..721882

APA	Yılmaz E (2020). A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. International Journal of Automotive Science and Technology, 4(2), 90 - 97. 10.30939/ijastech..721882
Chicago	Yılmaz Emre A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. International Journal of Automotive Science and Technology 4, no.2 (2020): 90 - 97. 10.30939/ijastech..721882
MLA	Yılmaz Emre A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. International Journal of Automotive Science and Technology, vol.4, no.2, 2020, ss.90 - 97. 10.30939/ijastech..721882
AMA	Yılmaz E A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. International Journal of Automotive Science and Technology. 2020; 4(2): 90 - 97. 10.30939/ijastech..721882
Vancouver	Yılmaz E A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine. International Journal of Automotive Science and Technology. 2020; 4(2): 90 - 97. 10.30939/ijastech..721882
IEEE	Yılmaz E "A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine." International Journal of Automotive Science and Technology, 4, ss.90 - 97, 2020. 10.30939/ijastech..721882
ISNAD	Yılmaz, Emre. "A Comparative Study on the Usage of RON68 and Naphtha in an HCCI Engine". International Journal of Automotive Science and Technology 4/2 (2020), 90-97. https://doi.org/10.30939/ijastech..721882