Investigation of the fracture behavior of steel / steel laminates in crack divider orientation

Doruk, Mustafa; SIMSIR, MEHMET; ÖZTÜRK, TAYFUR

Investigation of the fracture behavior of steel / steel laminates in crack divider orientation

Mehmet ŞİMŞİR, (Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü, Ankara, Türkiye)

Tayfur ÖZTÜRK, (Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü, Ankara, Türkiye)

Mustafa DORUK (Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü, Ankara, Türkiye)

Turkish Journal of Engineering and Environmental Sciences

1 0

Yıl: 2004 Cilt: 28 Sayı: 6 Sayfa Aralığı: 397 - 404 Metin Dili: İngilizce İndeks Tarihi: 29-07-2022

Investigation of the fracture behavior of steel / steel laminates in crack divider orientation

Öz:

A study is carried out to examine the applicability of $J_{IC}$ testing for laminates that behave in an elastic-plastic manner. Laminates made up of layers of low-C and medium-C steels are tested in crack divider orientation with a single specimen technique using a partially unloading compliance method. The study shows that the method can be applied for laminates for comparative purposes, but the values of J_{IC} derived . are not as reliable as those in monolithic materials. This is mainly due to difficulties faced with the estimation of crack growth data that are not accurate enough due to composite nature of the samples.

Anahtar Kelime:

Konular: Çevre Mühendisliği

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

Andrews, W.R. and Shih, C.F., "Thickness and Side Groove Effects on J-and 5-Resistance Curves for A533-B Steel at 93 °C", Elastic-Plastic Fracture, ASTM STP 668, 426-450, 1979.
ASTM D 2344-76, "Standard Test Method for Apparent Fiber Composites by Short-Beam Method", 1993 Annual Book of ASTM Standards, Philadelphia, 15.03, 373-376, 1997.
ASTM E 813 - 89, "Standard Test.Method for $J_{IC}$, A Measure of Fracture Toughness", 1993 Annual Book of ASTM Standards, Philadelphia, 03.01, 738 - 752, 1997.
Balton, J.D. and Gant, A.J. "Fracture in Ceramic-Reinforced Metal Matrix Composites Based on High-Speed Steel", Journal of Material Science, 33, 939-953, 1998.
Begley, J.A. and Landes, J.D., "The J-integral as a Fracture Criterion", Fracture Toughness, ASTM STP 514, 1-20, 1972.
Bloyer, D.R., Rao, K.T.V. and Ritchie, R.O., "Laminated $Nb/Nb_3Al$ Composites: Effect of Layer Thickness on Fatigue and Fracture Behavior", Material Science and Engineering, A239, 393-398, 1997.
Chung, D.S., Enoki, M. and Kishi, T., "Microstruc-tural Analysis and Mechanical Properties of in Situ Nb/Nb-Aluminide Layered Materials", Science and Technology of Advanced Materials, 3, 129-135, 2002.
Griffith, A.A., "The Theory of Rupture", Proceedings of 1st International Congress of Applied Mechanics, Delft, 1924.
Gudas, J.P. and Davis, D.A., "Evaluation of the Tentative J-R Curve Testing Procedure by Round Robin Tests of HY 130 Steel", Journal of Testing and Evaluation, 10, 252-262, 1982.
Hickerson, J., "Use of the Resonant Frequency Technique in $J_{IC}$ Testing", ASTM Committee Meeting E-24, Lake Buena Vista Fla., March 1976.
Hwu, K.L. and Derby, B., "Fracture of Metal/Ceramic Laminates-II Crack Growth Resistance and Toughness", Acta Materialia No. 2, 545-563, 1999.
Irwin, G.R., "Analysis Stresses and Strains near the End of a Crack Traversing a Plate", Journal of Applied Mechanics, 24, 109-114, 1957.
Manoharan, M.G., Ellis, L. and Lewandowski, J.J., "Laminated Composites with Improved Toughness" , Scripta Metallurgica et Materialia, 24, 1515-1519, 1990.
Neal, B.K. and Priest, R.H., "The Unloading Compliance Method for Crack Length Measurement Using Compact Tension and Precracked Charpy Specimens" , Elastic - Plastic Fracture Test Methods: The User's Experience, ASTM STP 856, 375 - 393, 1985.
Pandey, A.B., Majumder, B.S. and Mircacle, D.B., "Laminated Particulate-Reinforced Aluminum Composites with Improved Toughness", Acta Materialia 405-417, 2001.
Rice, J.R., "Mathematical Analysis in the Mechanics of Fracture", Fracture, H. Liebowitz, Ed., Academic Press, New York, 191-311, 1968.
Rohatgi, A., Harach, D.J., Vecchio, K.S. and Harvey, K.P., "Resistance-Curve and Fracture Behavior of $Ti-Al_3Ti$ Metallic-Intermetallic Laminate (MIL) Composites", Acta Materialia, 51, 2933-2957, 2003.
Schwalbe, K.H., Hellmann, D., Heerens, J., Knaack, J. and Müller-Roos, J., "Measurement of Stable Crack Growth Including Detection of Initiation of Growth Using the DC Potential Drop and the Partial Unloading Methods", Elastic-Plastic Fracture Test Methods: The User's Experience, ASTM STP 856, 338-362, 1985.
Shih, C.F., De Lorenzi, H.G. and Andrews, W.R., "Studies on Crack Initiation and Stable Crack Growth", Elastic-Plastic Fracture, ASTM STP 668, 65-120, 1979.
Underwood, J.H., Winters, D.C. and Kendall, D.P., "End-on Ultrasonic Crack Measurements in Steel Fracture Toughness Specimens and Thick-Wall Cylinders", The Section of Measurement of Cracks, The Welding Institute, Cambridge, 31-39, 1976.
Voss, B. and Mayville, R.A., "The Use of the Partial Unloading Compliance Method for the Determination of J1 - R Curves and Jıc", Elastic - Plastic Fracture Test Methods: The User's Experience, ASTM STP 856, 117 - 130, 1985.

APA	SIMSIR M, ÖZTÜRK T, Doruk M (2004). Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. , 397 - 404.
Chicago	SIMSIR MEHMET,ÖZTÜRK TAYFUR,Doruk Mustafa Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. (2004): 397 - 404.
MLA	SIMSIR MEHMET,ÖZTÜRK TAYFUR,Doruk Mustafa Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. , 2004, ss.397 - 404.
AMA	SIMSIR M,ÖZTÜRK T,Doruk M Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. . 2004; 397 - 404.
Vancouver	SIMSIR M,ÖZTÜRK T,Doruk M Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. . 2004; 397 - 404.
IEEE	SIMSIR M,ÖZTÜRK T,Doruk M "Investigation of the fracture behavior of steel / steel laminates in crack divider orientation." , ss.397 - 404, 2004.
ISNAD	SIMSIR, MEHMET vd. "Investigation of the fracture behavior of steel / steel laminates in crack divider orientation". (2004), 397-404.

APA	SIMSIR M, ÖZTÜRK T, Doruk M (2004). Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. Turkish Journal of Engineering and Environmental Sciences, 28(6), 397 - 404.
Chicago	SIMSIR MEHMET,ÖZTÜRK TAYFUR,Doruk Mustafa Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. Turkish Journal of Engineering and Environmental Sciences 28, no.6 (2004): 397 - 404.
MLA	SIMSIR MEHMET,ÖZTÜRK TAYFUR,Doruk Mustafa Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. Turkish Journal of Engineering and Environmental Sciences, vol.28, no.6, 2004, ss.397 - 404.
AMA	SIMSIR M,ÖZTÜRK T,Doruk M Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. Turkish Journal of Engineering and Environmental Sciences. 2004; 28(6): 397 - 404.
Vancouver	SIMSIR M,ÖZTÜRK T,Doruk M Investigation of the fracture behavior of steel / steel laminates in crack divider orientation. Turkish Journal of Engineering and Environmental Sciences. 2004; 28(6): 397 - 404.
IEEE	SIMSIR M,ÖZTÜRK T,Doruk M "Investigation of the fracture behavior of steel / steel laminates in crack divider orientation." Turkish Journal of Engineering and Environmental Sciences, 28, ss.397 - 404, 2004.
ISNAD	SIMSIR, MEHMET vd. "Investigation of the fracture behavior of steel / steel laminates in crack divider orientation". Turkish Journal of Engineering and Environmental Sciences 28/6 (2004), 397-404.