Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles

Mahmut Can ŞENEL, (Ondokuz Mayıs Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Samsun, Türkiye)
Mevlüt GÜRBÜZ (Ondokuz Mayıs Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Samsun, Türkiye)
Düzce Üniversitesi Bilim ve Teknoloji Dergisi
0 0
Yıl: 2019 Cilt: 7 Sayı: 3 Sayfa Aralığı: 1341 - 1350 Metin Dili: İngilizce DOI: 10.29130/dubited.518527 İndeks Tarihi: 31-12-2020

Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles

Öz:
In the present work, nano alumina (Al2O3) reinforced aluminum (Al) matrix composites with various aluminacontent (0-2.5wt.%) were fabricated by powder metallurgy method. This method consists of mixing, ultrasonicdispersion, filtering, drying, pressing, and sintering processes. The effects of nano alumina amount on theVickers hardness, apparent density, compressive strength, and microstructure of nano alumina reinforcedaluminum matrix composites were investigated. The maximum apparent density (2.66 g/cm3), Vickers hardness(43±1 HV), and compressive strength (130±3 MPa) were determined at Al-2wt.%Al2O3 composite. After 2wt.%nano alumina content, the agglomeration was detected by a scanning electron microscope (SEM). Thisagglomeration deteriorated the mechanical properties of nano alumina reinforced aluminum matrix composites.
Anahtar Kelime:

Nano Alümina Parçacıkları ile Takviyelendirilmiş Alüminyum Matrisli Kompozitlerin Üretimi ve Mekanik Davranışı

Öz:
Bu çalışmada nano alümina (Al2O3) takviyeli alüminyum (Al) matrisli kompozitler (ağ. % 0-2.5) toz metalurjisi yöntemiyle üretilmiştir. Bu yöntem karıştırma, ultrasonik dağıtma, filtreleme, kurutma, presleme ve sinterleme işlemlerinden oluşmaktadır. Nano alümina miktarının Vickers sertliği, yoğunluk, basma dayanımı ve kompozitlerin mikroyapıları üzerindeki etkileri incelenmiştir. Maksimum yoğunluk (2.66 g/cm3 ), Vickers sertliği (43±1 HV) ve basma dayanımı (130±3 MPa), ağırlıkça %2 Al2O3 takviyeli Al kompozit yapıda elde edilmiştir. Ağırlıkça %2 nano alümina katkısından sonra, topaklanma oluşumu taramalı elektron mikroskobu (SEM) ile tespit edilmiştir. Bu topaklanmalar nano alümina takviyeli alüminyum matrisli kompozitlerin mekanik özelliklerini olumsuz etkilemiştir.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • [1] G. O’Donnel and L. Looney, “Production of Aluminium Matrix Composite Component Using Conventional PM Technology,” Materials Science and Engineering A, vol. 303, pp. 292–301, 2001.
  • [2] O.G. Neikow, S.S. Naboychenko, and G. Dawson, Handbook of Non-Ferrous Metal PowdersTechnologies and Applications, 1st edition, Amsterdam, Holland: Elsevier Ltd, 2009 pp. 634.
  • [3] B. Ramesh and T. Senthilvelan, Formability Characteristics of Aluminium Based Compositesa Review, International Journal of Engineering&Technology, vol. 2, pp. 1-6, 2010.
  • [4] K.K. Alaneme and M.O. Bodunrin, “Mechanical Behaviour of Alumina Reinforced AA6063 Metal Matrix Composites Developed by Two Step-Stir Casting Process”, Acta Technica Corviniensis, Bulletin of Engineering, tome VI, fasicule 3, 2013.
  • [5] K.K. Alaneme, “Influence of Thermo-mechanical Treatment on the Tensile Behaviour and CNT evaluated Fracture Toughness of Borax Premixed Silicon Carbide Reinforced Aluminium (6063) Matrix Composites”, International Journal of Materials and Mechanical Engineering, vol. 7, no. 1, pp. 96-100, 2012.
  • [6] G.B. Veeresh Kumar, C.S.P. Rao, N. Selvaraj, and M.S. Bhagyashekar, “Studies on Al (6061) and 7075-Al203 Metal Matrix Composites”, Journal of Minerals and Materials Characterization and Engineering, vol. 9, no. 1, pp. 43-55, 2010.
  • [7] N. Natarajan, S. Vijayarangan, and I. Rajendran, “Fabrication, Testing and Thermal Analysis of Metal Matrix Composite Brake Drum”, International Journal of Vehicle Design, vol. 443, no. 4, pp. 339-359, 2007.
  • [8] T. Mutuk, M. Gürbüz, “Fabricating Graphene-Titanium (<30 µm) Composites by Powder Metallurgy Method: Microstrructure and Mechanical Properties”, Düzce University Journal of Science&Technology, vol. 7, pp. 89-97, 2019.
  • [9] M. Pul, Alüminyum 7075 Matrisli Kompozitlerde SiC, B4C ve TiB2 Takviye Elemanlarının Mekanik Özelliklere Etkilerinin Karşılaştırılması”, Düzce Üniversitesi Bilim ve Teknoloji Dergisi, vol.
  • 7, pp. 180-193, 2019. [10] A. Özkan, N. Şişik, U. Öztürk, “Kompozit Malzemelerin Ağız, Yüz, Çene Cerrahisinde Kullanımı ve Malzeme Uygunluklarının Belirlenmesi”, Düzce Üniversitesi Bilim ve Teknoloji Dergisi, vol. 4, pp. 227-242, 2016.
  • [11] H.R. Ezatpour, M. Torabi Parizi, S.A. Sajjadi, G.R. Ebrahimi, and A. Chaichi, “Microstructure, Mechanical Analysis and Optimal Selection of 7075 Aluminum Alloy Based Composite Reinforced with Alumina Nanoparticles”, Materials Chemistry and Physics, vol. 178, pp. 119-127, 2016.
  • [12] N. Srivastava and G.P. Chaudhari, “Microstructural Evolution and Mechanical Behavior of Ultrasonically Synthesized Al6061-Nano Alumina Composites”, Materials Science and Engineering A, vol. 724, pp. 199-207, 2018.
  • [13] M. Kok, “Production and Mechanical Properties of Al2O3 Particle-Reinforced 2024 Aluminium Alloy Composites”, Journal of Materials Processing Techology, vol. 161, pp. 381–387, 2005.
  • [14] S.A. Sajjadi, H.R. Ezatpour, and H. Beygi, “Microstructure and Mechanical Properties of Al– Al2O3 Micro and Nano Composites Fabricated by Stir Casting”, Materials Science and Engineering A, vol. 528, pp. 8765– 8771, 2011.
  • [15] M.C. Şenel, M. Gürbüz, and E. Koç, The Fabrication and Characterization of Synergistic Al-SiC-GNPs Hybrid Composites”, Composites Part B-Eng., vol. 154, pp. 1-9, 2018.
  • [16] M. Gürbüz, M.C. Şenel, and E. Koç, “The Effect of Sintering Temperature, Time and Graphene Addition on the Mechanical Properties and Microstructure of Aluminum Composites”, Journal of Composite Materials, vol. 52, no.4, pp. 553-563, 2018.
  • [17] M.C. Şenel, M. Gürbüz, E. Koç, “Mechanical and Tribological Behaviors of Aluminum Matrix Composites Reinforced by Graphene Nanoplatelets”, Journal of Materials Science and Technology, vol. 34, no. 16, pp. 1980-1989, 2018.
APA ŞENEL M, Gürbüz M (2019). Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. , 1341 - 1350. 10.29130/dubited.518527
Chicago ŞENEL MAHMUT CAN,Gürbüz Mevlüt Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. (2019): 1341 - 1350. 10.29130/dubited.518527
MLA ŞENEL MAHMUT CAN,Gürbüz Mevlüt Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. , 2019, ss.1341 - 1350. 10.29130/dubited.518527
AMA ŞENEL M,Gürbüz M Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. . 2019; 1341 - 1350. 10.29130/dubited.518527
Vancouver ŞENEL M,Gürbüz M Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. . 2019; 1341 - 1350. 10.29130/dubited.518527
IEEE ŞENEL M,Gürbüz M "Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles." , ss.1341 - 1350, 2019. 10.29130/dubited.518527
ISNAD ŞENEL, MAHMUT CAN - Gürbüz, Mevlüt. "Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles". (2019), 1341-1350. https://doi.org/10.29130/dubited.518527
APA ŞENEL M, Gürbüz M (2019). Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 7(3), 1341 - 1350. 10.29130/dubited.518527
Chicago ŞENEL MAHMUT CAN,Gürbüz Mevlüt Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. Düzce Üniversitesi Bilim ve Teknoloji Dergisi 7, no.3 (2019): 1341 - 1350. 10.29130/dubited.518527
MLA ŞENEL MAHMUT CAN,Gürbüz Mevlüt Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, vol.7, no.3, 2019, ss.1341 - 1350. 10.29130/dubited.518527
AMA ŞENEL M,Gürbüz M Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. Düzce Üniversitesi Bilim ve Teknoloji Dergisi. 2019; 7(3): 1341 - 1350. 10.29130/dubited.518527
Vancouver ŞENEL M,Gürbüz M Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles. Düzce Üniversitesi Bilim ve Teknoloji Dergisi. 2019; 7(3): 1341 - 1350. 10.29130/dubited.518527
IEEE ŞENEL M,Gürbüz M "Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles." Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 7, ss.1341 - 1350, 2019. 10.29130/dubited.518527
ISNAD ŞENEL, MAHMUT CAN - Gürbüz, Mevlüt. "Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles". Düzce Üniversitesi Bilim ve Teknoloji Dergisi 7/3 (2019), 1341-1350. https://doi.org/10.29130/dubited.518527
Sayfa Oluşturulma Tarihi
24-04-2024 22:34

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları