Yıl: 2020 Cilt: 11 Sayı: 2 Sayfa Aralığı: 152 - 160 Metin Dili: Türkçe DOI: 10.22312/sdusbed.641317 İndeks Tarihi: 30-04-2021

Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi

Öz:
Amaç: Bu çalışmanın amacı, bir diş laboratuvarındanelde edilen, farklı hekimler tarafından tam seramik kronüretimi için yapılan diş preparasyonlarının dijital verilerininincelenmesi, ölçülmesi ve değerlendirilmesidir.Materyal-Metot: Çalışmamızda 64 farklı diş hekimine (30pratisyen, 34 protez uzmanı) ait 444 adet dijital daylı modelin;toplam oklüzal yaklaşım (Total Occlusal Convergence) (TOC)açısı, abutment uzunluğu, marjinal bitim şeklinin basamaklı(shoulder ya da chamfer) olup olmadığı; eğer daylı modeldebasamak bulunuyorsa basamak genişliği ve prepare edilendişin anatomik formunun korunup korunmadığı incelenmiştir.Bulgular: Elde edilen sonuçlar değerlendirildiğinde, tümhekimlere ait ortalama TOC değeri 22,83°, abutment uzunluğu6,85 mm, marjinal bölgede shoulder veya chamfer basamaklıbir bitim şekli oluşturma oranı %26,4, anatomik formu korumaoranı %70,5 olarak bulundu. Protez uzmanı diş hekimleri ilepratisyen diş hekimleri arasındaki ortalama TOC değeri farkıve protez uzmanı diş hekimleri ile pratisyen diş hekimleriarasındaki abutment uzunluğu farkı istatistiksel olarak önemlibulunmadı. Protez uzmanı diş hekimleri (%31,7) ile pratisyendiş hekimlerinin (%21,8) basamak oluşturma oranlarıarasındaki fark ve protez uzmanı diş hekimleri (%77,1) ilepratisyen diş hekimlerinin (%64,9) anatomik formu korumaoranları arasındaki fark istatistiksel olarak önemli bulundu.Sonuç: Temel kitapların diş preparasyon parametreleri içinönerdiği değerler ve çalışmamızla uyumluluk gösteren diğerklinik ve laboratuvar çalışmaları değerleri arasında farklılıkbulunmaktadır. Bu yüzden önerilen bu değerlerin gözdengeçirilmesi ve klinik olarak daha ulaşılabilir, gerçekçirehberlere güncellenmesi gerektiğini düşünmekteyiz.Bu çalışmanın sonuçlarına göre, hekimlerin preparasyonkurallarına yeterince dikkat etmedikleri görülmektedir.
Anahtar Kelime:

Evaluation The Digital Data Of Full Ceramic Crown Preparations

Öz:
Objective: The aim of this study was to investigate, measure and evaluate the digital data of tooth preparations, which were obtained from a dental laboratory for the production of allceramic crowns, made by different clinicians. Material-Method: In our study, 444 digital die models belonged to 64 different dentists (30 general dentists, 34 prosthodontists) evaluated. Total occlusal convergence (TOC) angle, abutment height, the configuration of marginal finish line prepared as shoulder or chamfer, the width of marginal finish line and anatomical form preservation of prepared teeth were examined. Results: When the obtained results were evaluated; the mean TOC value was 22.83°, the abutment height was 6.85 mm, preparation ratio of marginal finish line as shoulder or chamfer configuration was 26.4% and preservation ratio of the anatomical form was 70,5% for clinicians. In terms of TOC value and abutment height, the difference between the prosthodontists and general dentists were not statistically significant. Regarding the preparation ratio of marginal finish line as shoulder or chamfer configuration, between the prosthodontists (31.7%) and general dentists (21.8%), difference was found statistically significant. Regarding the preservation ratio of the anatomical form between the prosthodontists (77.1%) and general dentists (64.9%) difference was found statistically significant. Conclusions: There were differences between the values suggested in basic books for tooth preparation parameters and the values of other clinical and laboratory studies similar to our study. Therefore, it is suggested that these proposed values should be revised and updated to more accesible and realistic guidelines. According to the results of this study, it was observed that clinicians did not pay enough attention to the rules of preparation.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • 1. Bayındır F, Uzun İH. Tam seramik kuron sistemleri. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2007; 33-42.
  • 2. Lawn BR, Deng Y, Lloyd IK, Janal MN, Rekow ED, Thopmpson VP. Materials design of ceramic based layer structures for crowns. Journal of Dental Research. 2002; 81(6): 433-8.
  • 3. Vult P, Von S, Carlson P, Nilner K. All ceramic fixed partial dentures designed according to the DC-Zirkon technique. A 2-year clinical study. Journal of Oral Rehabilitation. 2005; 32: 180-7.
  • 4. Craig RG. Restorative Dental Materials. 13th ed. New York, Mosby Publication, 2002; 551-92.
  • 5. Tiu j. Tooth Preparation – measuring, understanding, and reporting tooth preparation and its influence on fracture of all-ceramic crowns. University of Otago. Doctoral thesis. Dunedin, New Zealand, 2015.
  • 6. Land CH. Porcelain dental art [microform] : the new process of restoring decayed and defective teeth to their original appearance in shape, size and color. Detroit:O.S. Gulley, Bornman, 1988.
  • 7. Shillingburg HT, Sather DA. & Stone SE. Fundamentals of fixed prosthodontics. 4th edition. Quintessence Publishing. Chicago, USA, 2012.
  • 8. Shillingburg HT, Hobo S, Whitsett LD, Jacobi R, Brackett SE. Diş Preparasyon Esasları. Sabit Protezin Temelleri. Ünsal MK, Üşümez A, Editörler. 3. Baskı, İstanbul: Quintessence Yayıncılık, 2010; 117-35.
  • 9. Goodacre CJ, Campagni WV & Aquiliano SA. Tooth Preparations For Complete Crowns: An Art Form Based On Scientific Principles. Journal of Prosthetic Dentistry. 2001; 85: 363-76.
  • 10. Ayad MF, Maghrabi AA, Rosenstiel SF. Assessment of convergence angles of tooth preparations for complete crowns among dental students. Journal of Dentistry. 2005; 33: 633-8.
  • 11. Ohm E & Silness J. The convergence angle in teeth prepared for artificial crowns. Journal of Oral Rehabilitation. 1978; 5: 371-5.
  • 12. Al-Omari WM, Al-Wahadni AM. Convergence angle, occlusal reduction, and finish line depth of full-crown preparations made by dental students. Quintessence Int 2004; 35: 287-93.
  • 13. Esser C, Kerschbaum T, Winkelmann V, Krage T, Faber FJ. A comparison of the visual and technical assessment of preparations made by dental students. European Journal of Dental Education. 2006; 10: 157-61.
  • 14. Annerstedt A, Engstrom U, Hansson A, Jansson T, Karlsson S, Liljhagen H, Lindquist E, Rydhammar E, Tyreman-Bandhede M, Svensson P & Wandel U. Axial wall convergence of full veneer crown. Acta Odontologica Scandinavica. 1996; 54(2): 109-12.
  • 15. Patel PB, Wildgoose DG, Winstanley RB. Comparison of convergence angles achieved in posterior teeth prepared for full veneer crowns. European Journal of Prosthodontics and Restorative Dentistry. 2005; 13: 100-4.
  • 16. The Glossary of Prosthodontic Terms. Journal of Prosthetic Dentistry. 2005; 94: 10-92.
  • 17. Prothero JH. Prosthetic dentistry. Chicago: Medico-Dental Publishing Co. 1923; 742.
  • 18. Jorgensen KD. The relationship between retention and convergence angle in cemented veneer crowns. Acta Odontologica Scandinavica. 1955; 13: 35-40.
  • 19. Kaufman, E, Coelho D & Colin L. Factors influencing the retention of cemented gold castings. Journal of Prosthetic Dentistry. 1961; 11(3): 487-502.
  • 20. El-Ebrashi MK, Craig RG, Peyton FA. Experimental Stress Analysis Of Dental Restorations. Part III. The Concept of The Geometry of Proximal Margins. Journal of Prosthetic Dentistry. 1969; 22: 333-45
  • 21. Shillingburg HT, Hobo S, Whitsett LD, Jacobi R, Brackett SE. Fundamentals of fixed prosthodontics. 3rd ed. Chicago, Illinois, Quintessence Publishing Co Inc. 1997; 24: 433-54.
  • 22. Eames WB, O’Neal SJ, Monteiro J, Miller C, Roan Jr JD & Cohen KS. Techniques to improve the seating of castings. Journal of the American Dental Association. 1978; 96: 432-7.
  • 23. Mack PJ. A theoretical and clinical investigation into the taper achieved on crown and inlay preparations. Journal of Oral Rehabilitation. 1980; 15: 265-93.
  • 24. Owen CP. Retention and resistance in preparations for extracoronal restorations. Part II: Practical and clinical studies. Journal of Prosthetic Dentistry 1986; 56: 148-53.
  • 25. Leempoel PJ, Lemmens PL, Snoek PA & Van 't Hof MA. The convergence angle of tooth preparations for complete crowns. Journal of Prosthetic Dentistry 1987; 58: 414-6.
  • 26. Nordlander J, Weir D, Stoffer W & Ochi S. The taper of clinical preparations for fixed prosthodontics. Journal of Prosthetic Dentistry 1988; 60: 148-51.
  • 27. Sato T, Al Mutawa N, Okada D, Hasegawa S. A clinical study on abutment taper and height of full cast crown preparations. Journal of Medical and Dental Sciences. 1998; 45: 205-10.
  • 28. Okuyama Y, Kasahara S, Kimura K. Quantitative evaluation of axial Wall taper in prepared artificial teeth. Journal of Oral Sciences. 2005; 47: 129-33.
  • 29. Parker MH, Calverley MJ, Gardner FM, Gunderson RB. New guidelines for preparation taper. Journal of Prosthodontics. 1993; 2: 61-6.
  • 30. Maxwell AW, Blank LW, Pelleu GB Jr. Effect of crown preparation height on the retention and resistance of gold castings. General Dentistry. 1990; 38: 200-2.
  • 31. Mowafy OM, Fenton AH, Forrester N, Milenkovic M. Retention of metal ceramic crowns cemented with resin cements: effects of preparation taper and height. Journal of Prosthetic Dentistry. 1996; 76: 524–9.
  • 32. Zidan O, Ferguson GC. The retention of complete crowns prepared with three different tapers and luted with four different cements. Journal of Prosthetic Dentistry. 2003; 89: 565–71.
  • 33. Sarafianou A, Kafandaris NM. Effect of convergence angle on retention of resin bonded retainers cemented with resinous cements. Journal of Prosthetic Dentistry. 1997; 77: 475–81.
  • 34. Rosenstiel SF, Land MF, Fujimoto J. Contemporary fixed Prosthodontics. 4th ed. St Louis: Elsevier; 2006; 209-57.
  • 35. Gavelis JR, Morency JD, Riley ED & Sozio RB. The effect of various finish line preparations on the marginal seal and occlusal seat of full crown preparations. Journal of Prosthetic Dentistry 1981; 45: 138-45.
  • 36. Friedlander LD, Munoz CA, Goodacre CJ, Doyle MG, Moore BK. The effect of tooth preparation design on the breaking strength of Dicor crowns: part 1. International Journal of Prosthodontics. 1990; 3: 159-68.
  • 37. Doyle MG, Munoz CA, Goodacre CJ, Friedlander LD, Moore BK. The effect of tooth preparation design on the breaking strength of Dicor crowns: 2. International Journal of Prosthodontics. 1990; 3: 241-8.
  • 38. Sjogren G, Bergman M. Relationship between compressive strength and cervical shaping of the all-ceramic Cerestore crown. Swedish Dental Journal. 1987; 11: 147-52.
  • 39. Euan R, Figueras- Alvarez O, Cabratosa-Termes J, Brufau-de Barbera M, Gomez-Azevedo S. Comparison of the marginal adaptation of zirconium dioxide crowns in preparations with two different finish lines. Journal of Prosthodontics. 2012; 21(4): 291-5.
  • 40. Re D, Cerutti F, Augusti G, Cerutti A, Augusti A. Comparison of marginal fit of Lava CAD/CAM crowncopings with two finish lines. International Journal of Esthetic Dentistry. 2014; 9(3): 426-35.
  • 41. Ivoclar Vivadent; VITA Zahnfabrik H. Rauter GmbH &Co. KG.
  • 42. Craig RG, El-Ebrashi MK, Peyton FA. Experimental stress analysis of dental restorations. Part II. Two-dimensional photoelastic stress analysis of crowns. Journal of Prosthetic Dentistry. 1967; 17: 292-302.
  • 43. Nicholls JI. Crown retention. I. Stress analysis of symmetric restorations. Journal of Prosthetic Dentistry. 1974; 31: 179-84.
  • 44. Charbeneau GT, Peyton FA. Some effects of cavity instrumentation on the adaptation of gold castings and amalgam. Journal of Prosthetic Dentistry. 1958; 8: 514-525.
  • 45. Tjan AHL, Sarkissian R. Effect of preparation finish on retention and fit of complete crowns. Journal of Prosthetic Dentistry. 1986; 56: 283-8.
APA ASLAN İ, Tuna S (2020). Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. , 152 - 160. 10.22312/sdusbed.641317
Chicago ASLAN İsmail,Tuna Süleyman Hakan Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. (2020): 152 - 160. 10.22312/sdusbed.641317
MLA ASLAN İsmail,Tuna Süleyman Hakan Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. , 2020, ss.152 - 160. 10.22312/sdusbed.641317
AMA ASLAN İ,Tuna S Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. . 2020; 152 - 160. 10.22312/sdusbed.641317
Vancouver ASLAN İ,Tuna S Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. . 2020; 152 - 160. 10.22312/sdusbed.641317
IEEE ASLAN İ,Tuna S "Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi." , ss.152 - 160, 2020. 10.22312/sdusbed.641317
ISNAD ASLAN, İsmail - Tuna, Süleyman Hakan. "Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi". (2020), 152-160. https://doi.org/10.22312/sdusbed.641317
APA ASLAN İ, Tuna S (2020). Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. Süleyman Demirel Üniversitesi Sağlık Bilimleri Dergisi, 11(2), 152 - 160. 10.22312/sdusbed.641317
Chicago ASLAN İsmail,Tuna Süleyman Hakan Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. Süleyman Demirel Üniversitesi Sağlık Bilimleri Dergisi 11, no.2 (2020): 152 - 160. 10.22312/sdusbed.641317
MLA ASLAN İsmail,Tuna Süleyman Hakan Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. Süleyman Demirel Üniversitesi Sağlık Bilimleri Dergisi, vol.11, no.2, 2020, ss.152 - 160. 10.22312/sdusbed.641317
AMA ASLAN İ,Tuna S Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. Süleyman Demirel Üniversitesi Sağlık Bilimleri Dergisi. 2020; 11(2): 152 - 160. 10.22312/sdusbed.641317
Vancouver ASLAN İ,Tuna S Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi. Süleyman Demirel Üniversitesi Sağlık Bilimleri Dergisi. 2020; 11(2): 152 - 160. 10.22312/sdusbed.641317
IEEE ASLAN İ,Tuna S "Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi." Süleyman Demirel Üniversitesi Sağlık Bilimleri Dergisi, 11, ss.152 - 160, 2020. 10.22312/sdusbed.641317
ISNAD ASLAN, İsmail - Tuna, Süleyman Hakan. "Tam Seramik Kron Preparasyonlarının Dijital Verilerinin İncelenmesi". Süleyman Demirel Üniversitesi Sağlık Bilimleri Dergisi 11/2 (2020), 152-160. https://doi.org/10.22312/sdusbed.641317