OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY

Kurekci, Nuri Alpay

OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY

N. Alpay KÜREKCİ (Yıldız Teknik Üniversitesi, Makine Mühendisliği Bölümü, İstanbul, Türkiye)

Journal of Thermal Engineering

1 0

Yıl: 2020 Cilt: 6 Sayı: 5 Sayfa Aralığı: 873 - 887 Metin Dili: İngilizce İndeks Tarihi: 02-06-2021

OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY

Öz:

Cold storage have heat gain resulting from walls, roof, lighting, human, cooled products, and infiltration. Thebiggest of these gains is the heat gain through the walls. In this study, the optimum insulation thickness which should beused on the walls of cold storage was calculated. Calculations were made for 5 cities of Turkey (Izmir, Istanbul, Ankara,Sivas, and Erzurum) with different degree-day values. Extruded polystyrene (XPS), Expanded polystyrene (EPS), glasswool, rock wool, polyurethane were chosen as insulants to be used on the walls. Cooling degree-day values of the selectedcities were calculated by using the average external temperature of the cities and the cold storage temperature (4, 0, -5, -10, -15, -20, -25 and -30°C). Calculations were repeated for different cold storage temperature values, and optimuminsulation thicknesses that should be used for each temperature were found. In addition, energy savings and paybackperiods when optimum insulation thickness is used were also calculated.

Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

[1] Özel M. Effect of insulation location on dynamic heat-transfer characteristics of building external walls and optimization of insulation thickness. Energy and Buildings 2014;72:288-295. https://doi.org/10.1016/j.enbuild.2013.11.015
[2] Güllüce H, Karslı S, Saraç H. Konutlarda Yalıtım Kalınlıklarının Artırılmasının Enerji Tasarrufuna Etkisi. Ulusal İklimlendirme Kongresi 18-20 Nov. 2011, Antalya, Turkey.
[3] Yılmaz Hİ. Soğuk Hava Depolarında Kullanılan Farklı Yapı Malzemelerin Yalıtım ve Enerji Tasarrufu Özellikleri Üzerine Etkilerinin Karşılaştırmalı Olarak Değerlendirilmesi. Fruit Research Institute 2017;1: 154-160. ISSN: 2148-0036
[4] Aytaç A, Aksoy UT. Enerji Tasarrufu İçin Dış Duvarlarda Optimum Yalıtım Kalınlığı ve Isıtma Maliyeti İlişkisi, Journal of Gazi University Faculty of Engineering and Architecture 2006;21:753-758.
[5] Kaynaklı Ö, Yamankaradeniz R. Isıtma Süreci ve Optimum Yalıtım Kalınlığı Hesabı. TMMOB Tesisat Mühendisliği Dergisi 2008;104:19-25.
[6] Oğulata RG. Sectoral Energy Consumption in Turkey. Renewable and Sustainable Energy Reviews 2002;6: 471-480. https://doi.org/10.1016/S1364-0321(02)00012-6
[7] Kaygusuz K, Kaygusuz A. Energy and Sustainable Development Part II: Environmental İmpacts of Energy Use. Energy Sources 2004;26:1071-1082. https://doi.org/10.1080/00908310490441412
[8] Kürekci NA, Bardakçı AT, Çubuk H, Emanet Ö. Türkiye’nin Tüm İlleri İçin Optimum Yalıtım Kalınlığının Belirlenmesi. TMMOB Tesisat Mühendisliği Dergisi 2012;131:5-21.
[9] Özkan DB, Onan C. Optimization of insulation thickness for different glazing areas in buildings for various climatic regions in Turkey. Applied Energy 2011;88:1331–1342. https://doi.org/10.1016/j.apenergy.2010.10.025
[10] Özel M. Effect of wall orientation on the optimum insulation thickness by using a dynamic method. Applied Energy 2011;88:2429–2435. https://doi.org/10.1016/j.apenergy.2011.01.049
[11] Ashouri M, Astaraei FR, Ghasempour. R, Ahmadi M.H, Feidt M. Optimum insulation thickness determination of a building wall using exergetic life cycle assessment. Applied Thermal Engineering 2016; 106:307–315. https://doi.org/10.1016/j.applthermaleng.2016.05.190
[12] Ertürk M, Keçebaş A, Daşdemir A, Kurt H. Isıtma ve Soğutma Uygulamalarında Optimum Yalıtım Kalınlığı ve Enerji Tasarrufu Analizi. 10th International Clean Energy Symposium 24-26 October 2016, p. 496-506. Istanbul, Turkey.
[13] Liu X, Chen Y, Ge H, Fazio P, Chen G, Guod X. Determination of optimum insulation thickness for building walls with moisture transfer in hot summer and cold winter zone of China. Energy and Buildings 2015;109:361–368. https://doi.org/10.1016/j.enbuild.2015.10.021
[14] Dağıdır C, Bolattürk A. Sıcak İklim Bölgelerindeki Binalarda Isıtma ve Soğutma Yüküne Göre Tespit Edilen Optimum Yalıtım Kalınlıklarının Karşılaştırılması. TMMOB Tesisat Mühendisliği Dergisi 2011;124:64-77.
[15] Vincelas FFC, Ghislain T. The determination of the most economical combination between external wall and the optimum insulation material in Cameroonian's buildings. Journal of Building Engineering 2017;9:155– 163. https://doi.org/10.1016/j.jobe.2016.12.008
[16] Derradji L, Imessad K, Amara M, Errebai FB. A study on residential energy requirement and the effect of the glazing on the optimum insulation thickness. Applied Thermal Engineering 2017;112:975–985. https://doi.org/10.1016/j.applthermaleng.2016.10.116
[17] Ozer M. Determination of optimum insulation thickness based on cooling transmission load for building walls in a hot climate. Energy Conversion and Management 2013;66:106–114. https://doi.org/10.1016/j.enconman.2012.10.002
[18] Sanea SAA, Zedan MF. Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass. Applied Energy 2011;88:3113–3124. https://doi.org/10.1016/j.apenergy.2011.02.036
[19] Daouas N, Hassen Z, Aissia HB. Analytical periodic solution for the study of thermal performance and optimum insulation thickness of building walls in Tunisia. Applied Thermal Engineering 2010;30:319–326. https://doi.org/10.1016/j.applthermaleng.2009.09.009
[20] Nematchoua MK, Ricciardi P, Reiter S, Yvon A. A comparative study on optimum insulation thickness of walls and energy savings in equatorial and tropical climate. International Journal of Sustainable Built Environment 2017;6:170–182. https://doi.org/10.1016/j.ijsbe.2017.02.001
[21] TS 825, Binalarda Isı Yalıtım Kuralları, Turkish Standards Institute, 1998.
[22] Parameters of the insulation. www.izocam.com.tr
[23] Prices of electricity, 2018. http://enerjienstitusu.de/elektrik-fiyatlari/
[24] Inflation rate, Agu. 2018.http://www.tcmb.gov.tr
[25] Average external weather temperatures of cities. https://www.mgm.gov.tr
[26] Pusat Ş, Ekmekçi İ, Dündar AÇ, Ermiş K, Şen Y. İstanbul İçin Tipik Meteorolojik Yıl ve Derece-Saat Hesabı. 2. Ulusal İklimlendirme Soğutma Eğitimi Sempozyumu ve Sergisi Oct. 23-25 2014, Balıkesir, Turkey.
[27] Kumar D, Kumar S, Bhayo BA, Harijan K, Uqali MA. Economic and environmental impacts of thermal insulation used in different duct size. Journal of Thermal Engineering 2020;6:1:141- 156. https://doi.org/10.18186/thermal.672085
[28] Kurekci NA, Özcan M. A practical method for determination of economic insulation thickness of steel, plastic and copper hot water pipes. Journal of Thermal Engineering 2020;6:1:72-86. https://doi.org/10.18186/thermal.671651

APA	Kurekci N (2020). OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. , 873 - 887.
Chicago	Kurekci Nuri Alpay OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. (2020): 873 - 887.
MLA	Kurekci Nuri Alpay OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. , 2020, ss.873 - 887.
AMA	Kurekci N OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. . 2020; 873 - 887.
Vancouver	Kurekci N OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. . 2020; 873 - 887.
IEEE	Kurekci N "OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY." , ss.873 - 887, 2020.
ISNAD	Kurekci, Nuri Alpay. "OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY". (2020), 873-887.

APA	Kurekci N (2020). OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. Journal of Thermal Engineering, 6(5), 873 - 887.
Chicago	Kurekci Nuri Alpay OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. Journal of Thermal Engineering 6, no.5 (2020): 873 - 887.
MLA	Kurekci Nuri Alpay OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. Journal of Thermal Engineering, vol.6, no.5, 2020, ss.873 - 887.
AMA	Kurekci N OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. Journal of Thermal Engineering. 2020; 6(5): 873 - 887.
Vancouver	Kurekci N OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY. Journal of Thermal Engineering. 2020; 6(5): 873 - 887.
IEEE	Kurekci N "OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY." Journal of Thermal Engineering, 6, ss.873 - 887, 2020.
ISNAD	Kurekci, Nuri Alpay. "OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY". Journal of Thermal Engineering 6/5 (2020), 873-887.