Chemical characterization of waste tire pyrolysis products
Yıl: 2021 Cilt: 5 Sayı: 2 Sayfa Aralığı: 163 - 170 Metin Dili: İngilizce DOI: 10.35860/iarej.856112 İndeks Tarihi: 29-07-2022
Chemical characterization of waste tire pyrolysis products
Öz: The significance of tire disposal, an attractive waste to convert into burning oil or absorber etc.,has been increasing day by day. However, if it does not change into a useful form, it will damagethe nature and the living things. Thus, pyrolysis, a well-known method, which is used to convertrecycle tire waste into gas, liquid and char. On the other hand, the waste pyrolysis oil or wastetire oil (WTO) has a substantial avaliable calorific value similar to those of fossil fuels. Due topyrolysis reaction, high amount of sulfur is detected in the WTO; therefore, another step ofexplosion applied to WTO to decrease sulfur and also re-upgrade quality of oil with suchcatalysts as Calcium Oxide (CaO) and Natural Zeolite (NZ) at a ratio from 2 to 10 with anincrease of 2 for each step, individually. It is noticed that distillation test is a key analysis forseparation discrimination of rich or lean quality fuel. As a consequence of mixture of catalystWTO reactions, the best curve was observed at a 10% CaO-WTO mixture which was close todiesel#2 and the mixture was separated into two new fuels as light (Gasoline Like Fuel orabbreviated as GLF) and heavy one (Diesel Like Fuel or shortened as DLF) due to temperaturedifferences. According to distillation, FT-IR, NMR and UV–vis were used to analyze WTO,GLF and DLF for defining their characterization as well. Thus, the characterization result data ofsamples have quasi-equivalent with standard petroleum in open literature, and can be combustedin engine as well.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- 1. Chorazy, T., Čáslavský, J., Žvaková, V., Raček, J., Hlavínek P. Characteristics of Pyrolysis Oil as Renewable Source of Chemical Materials and Alternative Fuel from the Sewage Sludge Treatment. Waste and Biomass Valorization, 2020. 11(1): p. 4491–4505.
- 2. Lira, H.N.F., Rangel, E.T., Suarez, P.A.Z. Diesel-Like Fuels and Lubricating Grease Preparation from an Industrial Oily Waste. Waste and Biomass Valorization, 2019. 9(9): p 2459–2470.
- 3. Wang, K., Xu, Y., Duan, P., Wang, F., XianguXu, Z. Thermo-chemical conversion of scrap tire waste to produce gasoline fuel. Waste Management, 2019. 86(1): p 1-12.
- 4. Berrueco, C., Esperanza, E., Mastral, F.J., García-Bacaicoa, P., Ceamanos, J. Pyrolysis of waste tyres in an atmospheric static-bed batch reactor: Analysis of the gases obtained. Journal of Analytical and Applied Pyrolysis, 2005. 74(1): p 245-253.
- 5. 5. Sathiskumara, C., Karthikeyan, S. Recycling of waste tires and its energy storage application of by-products –a review. Sustainable Materials and Technologies, 2019, 22(1): p. 00125.
- 6. Moulin, L., Bounaceur, S.D.S.A., Soudais, M.H.Y. Assessment of Recovered Carbon Black Obtained by Waste Tires Steam Water Thermolysis : An Industrial Application. Waste and Biomass Valorization, 2017. 8(8): p 2757–2770.
- 7. Panda, A.K., Singh, R.K., Mishra, D.K. Thermolysis of waste plastics to liquid fuel. A suitable method for plastic waste management and manufacture of value added products-A world prospective. Renewable and Sustainable Energy Reviews, 2010. 74(1): p 233-248
- 8. Galvagno, S., Casciaro, G., Casu, S., Martino, M., Mingazzinie, C., Russod, A., Portofinoa, S. Steam gasification of tyre waste, poplar, and refuse-derived fuel: A comparative analysis. Waste Management, 2009. 29(2): p 678–689.
- 9. Sienkiewicz, M., Kucinska-Lipka, J., Janik, H., Balas, A. Progress in used tyres management in the European Union: A review. Waste Management, 2012. 32(10): p 1742–1751.
- 10. Kyari, M., Cunliffe, A., Williams, P.T. Characterization of oils, gases, and char in relation to the pyrolysis of different brands of scrap automotive tires. Energy and Fuels, 2005. 19(3): p 1165–1173.
- 11. Arabiourrutia. M., Lopez, G., Elordi, G., Olazar, M., Aguado, R., Bilbao, J. Product distribution obtained in the pyrolysis of tyres in a conical spouted bed reactor. Chemical Engineering Science, 2007. 62(18): p 5271-5275.
- 12. Roy, C., Chaala, A., Darmstadt, H. Vacuum pyrolysis of used tires end-uses for oil and carbon black products. Journal of Analytical and Applied Pyrolysis, 1999. 51(1): p 201-221.
- 13. Mohan, A., Dutta, S., Madav, V. Characterization and upgradation of crude tire pyrolysis oil (CTPO) obtained from a rotating autoclave reactor. Energy Conversion and Management, 2017. 250(1): p 339-351.
- 14. Williams, P.T. Pyrolysis of waste tyres: A review. Waste Management, 2013. 33(8): p 1714-1728.
- 15. Ayanoğlu, A., Yumrutaş, R. Production of gasoline and diesel like fuels from waste tire oil by using catalytic pyrolysis. Energy, 2016. 103(1): p 456–468.
- 16. Kebritchi, A., Firoozifar, H., Shams, K., Jalali-Arani, A. Effect of pre-devulcanization and temperature on physical and chemical properties of waste tire pyrolytic oil residue. Fuel, 2013. 112(21): p 319-325.
- 17. Lopez, G., Olazar, M., Amutio, M., Aguado, R., Bilbao, J. Influence of tire formulation on the products of continuous pyrolysis in a conical spouted bed reactor. Energy and Fuels, 2009. 23(11): p 5423–5431.
- 18. Ayanoglu, A., Yumrutaş, R. Rotary kiln and batch pyrolysis of waste tire to produce gasoline and diesel like fuels. Energy Conversion and Management, 2016. 111(1): p 261–270.
- 19. Wang, W.C., Bai, C.J., Lin, C.T., Prakash, S. Alternative fuel produced from thermal pyrolysis of waste tires and its use in a di diesel engine. Applied Thermal Engineering, 2016. 93(1): p 330–338.
- 20. Martínez, J.D., Murillo, R., García, T., Veses, A. Demonstration of the waste tire pyrolysis process on pilot scale in a continuous auger reactor. Journal of Hazardous Materials, 2013. 261(1): p 637–645.
- 21. Quek, A., Balasubramanian, R. Liquefaction of waste tires by pyrolysis for oil and chemicals - A review. Journal of Analytical and Applied Pyrolysis, 2013. 101(1): p 1–16.
- 22. Ilkiliç, C., Aydin, H. Fuel production from waste vehicle tires by catalytic pyrolysis and its application in a diesel engine. Fuel Processing Technology, 2011. 92(5): 1129– 1135. 23. Arpa, O., Yumrutas, R., Demirbas, A. Production of
- diesel-like fuel from waste engine oil by pyrolitic distillation. Applied Energy, 2010. 87(1): p 122–127.
- 24. Arpa, O., Yumrutaş, R., Argunhan, Z. Experimental investigation of the effects of diesel-like fuel obtained from waste lubrication oil on engine performance and exhaust emission. Fuel Processing Technology, 2010. 91(10): p 1241–1249.
- 25. Singh, A.P., Mukherji, S., Tewari, A.K., Kalsi, W.R., Sarpal, A.S. Determination of benzene and total aromatics in commercial gasolines using packed column GC and NMR techniques. Fuel, 2003. 82(1): p 23–33.
- 26. Atabani, A.E., Mekaoussi, M., Uguz, G., Arpa, O., Ayanoglu, A., Shobana, S. Evaluation, characterization, and engine performance of complementary fuel blends of butanol–biodiesel–diesel from Aleurites moluccanus as potential alternative fuels for CI engines. Energy and Environment, 2020. 31(5): p 755-784.
- 27. Kushnarev, D.F., Afonina, T.V., Kalabin, G.A., Presnova, R. N., Bogdanova, N.I. Investigation of the composition of crude oils and condensates from the south of the Siberian platform using 1H and 13C NMR spectroscopy. Petroleum Chemistry: USSR, 1989. 29: p 149–159.
- 28. Mondal, S., Yadav, A., Kumar, R., Bansal, V., Das, S.K., Christopher, J., Kapur, G.S., Molecular-Level Structural Insight into Clarified Oil by Nuclear Magnetic Resonance (NMR) Spectroscopy: Estimation of Hydrocarbon Types and Average Structural Parameters. Energy and Fuels, 2017. 31(7): p 7682–7692.
- 29. Shen, Y., Shuaı, S., Wang, J., Xıao, J. Optimization of gasoline hydrocarbon compositions for reducing exhaust emissions. Journal of Environmental Sciences, 2009. 21(9): p 1208-1213.
- 30. Muhammad, A., Azeredo, R. B. V. 1H NMR spectroscopy and low-field relaxometry for predicting viscosity and API gravity of Brazilian crude oils – A comparative study. Fuel, 2014. 130(9): p 126-134.
- 31. Poveda, J. C., Molina, D. R. Average molecular parameters of heavy crude oils and their fractions using NMR spectroscopy. Journal of Petroleum Science and Engineering, 2012. 84(1): p 1-7.
- 32. Shimamoto, G.G,. Tubino, M. Alternative methods to quantify biodiesel in standard diesel-biodiesel blends and samples adulterated with vegetable oil through UV–Visible spectroscopy. Fuel, 2016. 186(1): p 199-203.
- 33. Zanier, A., Jäckle, H.W. Heat capacity measurements of petroleum fuels by modulated DSC. Thermochimica Acta, 1996. 287(2): p 203–212.
- 34. Çakmak, A., Özcan, H. Benzin İçin Oksijenli Yakıt Katkıları. Journal of Polytechnic, 2018. 21(4): p 831–840.
- 35. Taleb, D.A., Hamid, H.A., Deris, R.R.R., Zulkifli, M., Khalil, N.A., Yahaya, A.N.A. Insights into pyrolysis of waste tire in fixed bed reactor: Thermal behavior. Materials Today: Proceedings, 2020. 31(1): p 178–186.
- 36. Islam, M. R., Haniu, H., Beg, M. R. A. Liquid fuels and chemicals from pyrolysis of motorcycle tire waste: Product yields, compositions and related properties. Fuel, 2008. 87(13): p 3112–3122.
- 37. Williams, P.T., Besler, S., Taylor, D.T. The pyrolysis of scrap automotive tyres. The influence of temperature and heating rate on product composition. Fuel, 1990. 69(12): p 1474–1482.
- 38. González, J.F., Encinar, J.M., Canito, J.L., Rodríguez, J.J. Pyrolysis of automobile tyre waste. Influence of operating variables and kinetics study. Journal of Analytical and Applied Pyrolysis, 2001. 58(1): p 667–683.
- 39. Siddiqui, M.N. Conversion of hazardous plastic wastes into useful chemical products. Journal of Hazardous Materials, 2009. 167(1-3): p 728–735.
- 40. Istadi, I., Buchori, L., Suherman, S. Plastic Waste Conversion To Liquid Fuels Over Modified-Residual Catalytic Cracking Catalysts: Modeling and Optimization Using Hybrid Artificial Neural Network – Genetic Algorithm. Reaktor, 2011. 13(3): p 131-139.
- 41. Mangesh, V.L., Padmanabhan, S., Tamizhdurai, P., Ramesh, A. Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel. Journal of Cleaner Production, 2020. 246(1-2): p 119066.
- 42. Corro, G., Flores, A., Pacheco-Aguirre, F., Pal, U., Bañuelos, F., Ramirez, A., Zehe, A. Biodiesel and fossilfuel diesel soot oxidation activities of Ag/CeO2 catalyst. Fuel, 2020. 250(1): p 17–26.
- 43. Burri, J., Crockett, R., Hany, R., Rentsch, D. Gasoline composition determined by 1H NMR spectroscopy. Fuel, 2004. 83(2): p 187–193.
- 44. Rakhmatullin, I.Z., Efimov, S.V., Tyurin, V.A., AlMuntaser, A.A., Klimovitskii, A.E., Varfolomeev, M.A., Klochkov, V.V. Application of high resolution NMR (1H and 13C) and FTIR spectroscopy for characterization of light and heavy crude oils. Journal of Petroleum Science and Engineering. 2018. 168(1): p 256–262.
- 45. Mohammed, M., Atabani, A., Uguz, G., Lay, C., Kumar, G., Al-Samaraae, R. Characterization of Hemp (Cannabis sativa L.) Biodiesel Blends with Euro Diesel, Butanol and Diethyl Ether Using FT-IR, UV–Vis, TGA and DSC Techniques. Waste and Biomass Valorization, 2020. 11(1): p 1097-1113.
| APA | UĞUZ G, ayanoglu a (2021). Chemical characterization of waste tire pyrolysis products. , 163 - 170. 10.35860/iarej.856112 |
| Chicago | UĞUZ Gediz,ayanoglu abdulkadir Chemical characterization of waste tire pyrolysis products. (2021): 163 - 170. 10.35860/iarej.856112 |
| MLA | UĞUZ Gediz,ayanoglu abdulkadir Chemical characterization of waste tire pyrolysis products. , 2021, ss.163 - 170. 10.35860/iarej.856112 |
| AMA | UĞUZ G,ayanoglu a Chemical characterization of waste tire pyrolysis products. . 2021; 163 - 170. 10.35860/iarej.856112 |
| Vancouver | UĞUZ G,ayanoglu a Chemical characterization of waste tire pyrolysis products. . 2021; 163 - 170. 10.35860/iarej.856112 |
| IEEE | UĞUZ G,ayanoglu a "Chemical characterization of waste tire pyrolysis products." , ss.163 - 170, 2021. 10.35860/iarej.856112 |
| ISNAD | UĞUZ, Gediz - ayanoglu, abdulkadir. "Chemical characterization of waste tire pyrolysis products". (2021), 163-170. https://doi.org/10.35860/iarej.856112 |
| APA | UĞUZ G, ayanoglu a (2021). Chemical characterization of waste tire pyrolysis products. International Advanced Researches and Engineering Journal, 5(2), 163 - 170. 10.35860/iarej.856112 |
| Chicago | UĞUZ Gediz,ayanoglu abdulkadir Chemical characterization of waste tire pyrolysis products. International Advanced Researches and Engineering Journal 5, no.2 (2021): 163 - 170. 10.35860/iarej.856112 |
| MLA | UĞUZ Gediz,ayanoglu abdulkadir Chemical characterization of waste tire pyrolysis products. International Advanced Researches and Engineering Journal, vol.5, no.2, 2021, ss.163 - 170. 10.35860/iarej.856112 |
| AMA | UĞUZ G,ayanoglu a Chemical characterization of waste tire pyrolysis products. International Advanced Researches and Engineering Journal. 2021; 5(2): 163 - 170. 10.35860/iarej.856112 |
| Vancouver | UĞUZ G,ayanoglu a Chemical characterization of waste tire pyrolysis products. International Advanced Researches and Engineering Journal. 2021; 5(2): 163 - 170. 10.35860/iarej.856112 |
| IEEE | UĞUZ G,ayanoglu a "Chemical characterization of waste tire pyrolysis products." International Advanced Researches and Engineering Journal, 5, ss.163 - 170, 2021. 10.35860/iarej.856112 |
| ISNAD | UĞUZ, Gediz - ayanoglu, abdulkadir. "Chemical characterization of waste tire pyrolysis products". International Advanced Researches and Engineering Journal 5/2 (2021), 163-170. https://doi.org/10.35860/iarej.856112 |
