Development of Finite Element Model for a Special Lead Extrusion Damper

Ahmet GÜLLÜ, (İstanbul Gedik Üniversitesi, İstanbul, Türkiye)
Furkan ÇALIM, (İstanbul Teknik Üniversitesi, İstanbul, Türkiye)
Ercan YÜKSEL, (İstanbul Teknik Üniversitesi, İstanbul, Türkiye)
Cihan SOYDAN (Namık Kemal Üniversitesi, Tekirdağ, Türkiye)
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi
2 1
Yıl: 2021 Cilt: 25 Sayı: 5 Sayfa Aralığı: 1159 - 1167 Metin Dili: İngilizce DOI: 10.16984/saufenbilder.808517 İndeks Tarihi: 29-07-2022

Development of Finite Element Model for a Special Lead Extrusion Damper

Öz:
A significant amount of seismic energy is imparted to the structures during earthquakes. Theenergy spreads within the structure and transforms in various energy forms as dissipatedthrough the structure. The conventional seismic design provides specific ductile regions,namely plastic hinges, on structural elements. Therefore, the energy dissipation capacities ofthe structural elements and the structure enhance. However, this approach accepts that thedeformations will concentrate on the plastic hinge zones and severe damage may occur onstructural elements within deformation limits that are defined by the seismic codes. The modernseismic design aims to dissipate a large portion of the seismic input energy by installing energydissipating devices (EDDs) to the structure. Thus, deformation concentrates on EDDs whichcan be replaced after an earthquake, and energy demand for structural elements is decreased.Lead extrusion damper (LED) is a passive EDD that utilizes the hysteretic behavior of lead. Inthis paper, the preliminary results of the developed three-dimensional finite element model(FEM) for a LED is presented. The results obtained from the finite element analysis (FEA) werecompared with the experimental ones in which LEDs were exposed to sinusoidal displacements.Also, the applicability of the developed FEM was checked for different component dimensionsgiven in the literature. The comparison study yielded a satisfactory consistency. Additionally,the maximum relative difference obtained for the literature devices was reduced to 12% from39% by the developed FEM.
Anahtar Kelime: Finite element analysis Lead extrusion damper Seismic energy dissipation Passive energy dissipater

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • [1] M. G. Soto, and H. Adeli, “Semi-active vibration control of smart isolated highway bridge structures using replicator dynamics,” Engineering Structures, vol. 186, pp.536-552, 2019.
  • [2] Y. Luo, X. Zhang, Y. Zhang, Y. Qu, M. Xu, K. Fu and L. Ye, “Active vibration control of a hoop truss structure with piezoelectric bending actuators based on fuzzy logic algorithm,” Smart Materials and Structures, vol. 27, no.8, 085030, 2018.
  • [3] X. Liu, G. Cai, F. Peng and H. Zhang, “Dynamic model and active vibration control of a membrane antenna structure,” Journal of Vibration and Control, vol. 24, no. 18, pp. 4282-4296, 2017.
  • [4] F. Karadoğan, E. Yüksel, A. Khajehdehi, H. Özkaynak, A. Güllü, and E. Şenol, “Cyclic behavior of reinforced concrete cladding panels connected with energy dissipative steel cushions,” Engineering Structures, vol. 189, pp. 423-439, 2019.
  • [5] E. Yüksel, F. Karadoğan, H. Özkaynak, A. Khajehdehi, A. Güllü, E. Smyrou and İ. E. Bal, “Behavior of steel cushions subjected to combined actions,” Bulletin of Earthquake Engineering, vol. 16, no. 2, pp. 707-729, 2018.
  • [6] H. Özkaynak, A. Khajehdehi, A. Güllü, F. Azizisales, E. Yüksel and F. Karadoğan, “Uni-axial behavior of energy dissipative steel cushions” Steel and Composite Structures, vol. 27, no. 6, pp. 661-674, 2018.
  • [7] P. Saingam, F. Sütçü, Y. Terazawa, K. Fujishita, P. C. Lin, O. C. Çelik and T. Takeuchi, “Composite behavior in RC buildings retrofitted using buckling restrained braces with elastic steel frames,” Engineering Structures, vol. 219, 110896, 2020.
  • [8] A. Xhahysa, S. Kahraman and S. C. Girgin, “Flexure based energy dissipating device in self-centering braces,” Latin American Journal of Solids and Structures, vol. 16, no. 8, e231, 2019.
  • [9] T. T. Soong and B. F. Spencer, “Supplemental energy dissipation: state-of-the-art and state-of-the-practice,” Engineering Structures, vol. 24, pp. 243-249, 2002.
  • [10] P. Deng, Z. Gan, T. Hayashikawa and T. Matsumoto, “Seismic response of highway viaducts equipped with lead-rubber bearings under low temperature,” Engineering Structures, vol. 209, 110008,2020.
  • [11] G. Özdemir and H. P. Gülkan, “Scaling legitimacy for design of lead rubber bearing isolated structures using a bounding analysis,” Earthquake Spectra, vol. 32, no.1, pp. 345-366, 2016.
  • [12] P. Shoaei, H. T. Orimi and S. M. Zahrai, “Seismic reliability-based design of inelastic base-isolated structures with lead-rubber bearing systems,” Soil Dynamics and Earthquake Engineering, vol. 115, pp. 589-605, 2018.
  • [13] C. Soydan, A. Güllü, O. E. Hepbostancı, E. Yüksel, and E. İrtem, “Design of a Special Lead Extrusion Damper”, 15th World Conference on Earthquake Engineering, Lisboa, Portugal, September 24-28, 2012.
  • [14] C. Soydan, E. Yüksel, and E. İrtem, “The Behavior of a Steel Connection Equipped with the Lead Extrusion Damper”, Advances in Structural Engineering, vol. 17, no. 1, pp. 25-40, 2014.
  • [15] C. Soydan, E. Yüksel, and E. İrtem, “Determination of the characteristics of a specially designed lead extrusion damper”, 14th World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, San Diego, USA September 9-11, 2015.
  • [16] C. Soydan, “A new energy dissipating device and its application to pinned connections in precast structural systems”, Ph.D. thesis, Istanbul Technical University, Istanbul, Turkey, 2015.
  • [17] C. Soydan, E. Yüksel, and E. İrtem, “Determination of the characteristics of a new prestressed lead extrusion damper”, 16th World Conference on Earthquake Engineering, Santiago, Chile, 2017.
  • [18] C. Soydan, E. Yüksel, and E. İrtem, “Retrofitting of Pinned Beam–Column Connections in RC Precast Frames Using Lead Extrusion Dampers”. Bulletin of Earthquake Engineering, vol. 16, no. 3, pp. 1273–1292, 2017.
  • [19] C. Soydan, E. Yüksel and E. İrtem, “Seismic performance improvement of single-storey precast reinforced concrete industrial buildings in use,” Soil Dynamics and Earthquake Engineering, vol. 135, 106167, 2020.
  • [20] W. H: Robinson and L. R. Greenbank, “Properties of an extrusion energy absorber,” Bulletin of New Zealand Society of Earthquake Engineering, vol. 8, no. 3, pp. 187-191, 1975.
  • [21] V. Vishnupriya, G. W. Rodgers, and J. G. Chase, “Finite element modelling of HF2V lead extrusion dampers for specific force capacities”, 2019 Pacific Conference on Earthquake Engineering, Auckland, New Zealand, April 4 6, 2019.
  • [22] V. Vishnupriya, “Modelling force behaviour and contributions of metallic extrusion dampers for seismic energy dissipation”, Ph.D. thesis, University of Canterbury, Christchurch, New Zealand, 2019.
  • [23] SIMULIA Abaqus/CAE (Version 2019) [Computer software]. Vélizy-Villacoublay: Dassault Systemes.
APA GÜLLÜ A, ÇALIM F, Yuksel E, Soydan C (2021). Development of Finite Element Model for a Special Lead Extrusion Damper. , 1159 - 1167. 10.16984/saufenbilder.808517
Chicago GÜLLÜ AHMET,ÇALIM FURKAN,Yuksel Ercan,Soydan Cihan Development of Finite Element Model for a Special Lead Extrusion Damper. (2021): 1159 - 1167. 10.16984/saufenbilder.808517
MLA GÜLLÜ AHMET,ÇALIM FURKAN,Yuksel Ercan,Soydan Cihan Development of Finite Element Model for a Special Lead Extrusion Damper. , 2021, ss.1159 - 1167. 10.16984/saufenbilder.808517
AMA GÜLLÜ A,ÇALIM F,Yuksel E,Soydan C Development of Finite Element Model for a Special Lead Extrusion Damper. . 2021; 1159 - 1167. 10.16984/saufenbilder.808517
Vancouver GÜLLÜ A,ÇALIM F,Yuksel E,Soydan C Development of Finite Element Model for a Special Lead Extrusion Damper. . 2021; 1159 - 1167. 10.16984/saufenbilder.808517
IEEE GÜLLÜ A,ÇALIM F,Yuksel E,Soydan C "Development of Finite Element Model for a Special Lead Extrusion Damper." , ss.1159 - 1167, 2021. 10.16984/saufenbilder.808517
ISNAD GÜLLÜ, AHMET vd. "Development of Finite Element Model for a Special Lead Extrusion Damper". (2021), 1159-1167. https://doi.org/10.16984/saufenbilder.808517
APA GÜLLÜ A, ÇALIM F, Yuksel E, Soydan C (2021). Development of Finite Element Model for a Special Lead Extrusion Damper. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 25(5), 1159 - 1167. 10.16984/saufenbilder.808517
Chicago GÜLLÜ AHMET,ÇALIM FURKAN,Yuksel Ercan,Soydan Cihan Development of Finite Element Model for a Special Lead Extrusion Damper. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi 25, no.5 (2021): 1159 - 1167. 10.16984/saufenbilder.808517
MLA GÜLLÜ AHMET,ÇALIM FURKAN,Yuksel Ercan,Soydan Cihan Development of Finite Element Model for a Special Lead Extrusion Damper. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.25, no.5, 2021, ss.1159 - 1167. 10.16984/saufenbilder.808517
AMA GÜLLÜ A,ÇALIM F,Yuksel E,Soydan C Development of Finite Element Model for a Special Lead Extrusion Damper. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 2021; 25(5): 1159 - 1167. 10.16984/saufenbilder.808517
Vancouver GÜLLÜ A,ÇALIM F,Yuksel E,Soydan C Development of Finite Element Model for a Special Lead Extrusion Damper. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 2021; 25(5): 1159 - 1167. 10.16984/saufenbilder.808517
IEEE GÜLLÜ A,ÇALIM F,Yuksel E,Soydan C "Development of Finite Element Model for a Special Lead Extrusion Damper." Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 25, ss.1159 - 1167, 2021. 10.16984/saufenbilder.808517
ISNAD GÜLLÜ, AHMET vd. "Development of Finite Element Model for a Special Lead Extrusion Damper". Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi 25/5 (2021), 1159-1167. https://doi.org/10.16984/saufenbilder.808517
Sayfa Oluşturulma Tarihi
24-04-2024 14:25

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları