Yıl: 2021 Cilt: 9 Sayı: 2 Sayfa Aralığı: 201 - 206 Metin Dili: İngilizce DOI: 10.17694/bajece.855262 İndeks Tarihi: 21-12-2021

The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation

Öz:
Today it is an obvious fact that energy consumption tends to increase due to technological developments, population growth, and increasing living standards. In last two decades, renewable energy sources are considered to be the most convenient way to produce clean energy, as it has infinite energy potential. However, most of these alternative systems are not considered sufficient to supply the whole demand alone. But hybrid systems with some alternative energy sources, such as solar, wind, and biomass appear to be a solution to supply the energy needs in the future. In hybrid systems, the DC-DC converter structure is the main device when converting energy for the proper loads. Single/multiple inputs, single/multiple output DC-DC converter topologies vary in design according to the energy demand of the load. Particularly, as the power flow direction differs depending on the energy need and efficiency in energy systems, the usage areas of topologies with bidirectional power flow and fewer circuit elements that reduce system cost and complexity are expanding. In this study, the simulation of multi-input single-output (MISO) DC-DC converter topologies were performed in Matlab / Simulink software. Inductor current and voltage, output current and voltage, as well as output power used in the determining topologies were analyzed. The mathematical equations given in the topologies were confirmed by simulation studies.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
0
0
0
  • [1] Siemens® Databook, “Ferrites and Accessories”, www.epcos.com.
  • [2] Ferroxcube® Databook, “Soft Ferrites and Accessories”, www.ferroxcube.com.
  • [3] Magnetics® Databook, 2004 Magnetics Catalog, www.mag-inc.com.
  • [4] D. Dujić, F. Kieferndorf, and F. Canales, “Power electronic transformer technology for traction applications-An overview,” Electronics. 2012.
  • [5] Y. J. Lee, A. Khaligh, and A. Emadi, “Advanced integrated bidirectional AC/DC and DC/DC converter for plug-in hybrid electric vehicles,” IEEE Trans. Veh. Technol., 2009.
  • [6] Y. Du, S. Lukic, B. Jacobson, and A. Huang, “Review of high power isolated bi-directional DC-DC converters for PHEV/EV DC charging infrastructure,” 2011.
  • [7] J. Rocabert, A. Luna, F. Blaabjerg, and P. Rodríguez, “Control of power converters in AC microgrids,” IEEE Trans. Power Electron., 2012.
  • [8] F. Wang, J. L. Duarte, and M. A. M. Hendrix, “Grid-interfacing converter systems with enhanced voltage quality for microgrid application concept and implementation,” IEEE Trans. Power Electron., 2011.
  • [9] Z. Zhao, M. Xu, Q. Chen, J. S. J. Lai, and Y. Cho, “Derivation, analysis, and implementation of a boost-buck converter-based highefficiency PV inverter,” IEEE Trans. Power Electron., 2012.
  • [10] B. Sri Revathi and M. Prabhakar, “Non-isolated high gain DC-DC converter topologies for PV applications – A comprehensive review,” Renewable and Sustainable Energy Reviews. 2016.
  • [11] D. Burmester, R. Rayudu, W. Seah, and D. Akinyele, “A review of nanogrid topologies and technologies,” Renewable and Sustainable Energy Reviews. 2017.
  • [12] Buning, E. A. (2010). Electric drives in agricultural machineryapproach from the tractor side. Journal of Agricultural Engineering, 47(3), 30-35.
  • [13] Hemetsberger F. A. (2003). An Investigation Of Power Quality Problems In A Remote Mine Site, M.S. Thesis, The University of Queensland.
  • [14] Mcmurray, W. (1970). U.S. Patent No. 3,517,300. Washington, DC: U.S. Patent and Trademark Office.
  • [15] J. L. Brooks, “Solid State Transformer Concept Development,” 1980.
  • [16] E. R. Ronan, S. D. Sudhoff, S. F. Glover, and D. L. Galloway, “Application of power electronics to the distribution transformer,” 2000.
  • [17] L. Yang, T. Zhao, J. Wang, and A. Q. Huang, “Design and analysis of a 270kW five-level DC/DC converter for solid-state transformer using 10kV SiC power devices,” 2007.
  • [18] A. W. Lotfi and M. A. Wilkowski, “Issues and Advances in HighFrequency Magnetics for Switching Power Supplies,” Proc. IEEE, 2001.
  • [19] M. Davari, S. M. Ale-Emran, H. Yazdanpanahi, and G. B. Gharehpetian, “Modeling the combination of UPQC and photovoltaic arrays with multi-input single-output DC-DC converter,” 2009.
  • [20] R. Noroozian, M. Abedi, G. B. Gharehpetian, and A. Bayat, “On-grid and off-grid operation of multi-input single-output DC/DC converter based fuel cell generation system,” 2010.
  • [21] Yalamanchili K. P., Ferdowsi M., Lu S., Xiao P., and Corzine K., “Derivation of Double-input DC-DC Power Electronic Converters”, Electric Power Components and Systems, vol.39, no.5, 478-490, 2011.
  • [22] Archana N. and Anupamma K. I., “Multi-input Inverter for Hybrid Wind-Photovoltaic Standalone System”, Second International Conference on Computing Methodologies and Communication, ICCMC 2018.
  • [23] L. Kumar and S. Jain, “A novel multiple-input DC-DC converter for electric vehicular applications,” 2012.
  • [24] L. Kumar and S. Jain, “A multiple-input DC-DC converter for interfacing of battery/ultracapacitor in EVs/HEVs/FCVs,” 2012.
  • [25] F. Akar, Y. Tavlasoglu, E. Ugur, B. Vural, and I. Aksoy, “A Bidirectional Nonisolated Multi-Input DC-DC Converter for Hybrid Energy Storage Systems in Electric Vehicles,” IEEE Trans. Veh. Technol., 2016.
  • [26] Shetty S. N. and Raheman Md. A., “Design and Simulation of Dual Input DC/DC Converter”, International Journal of Innovative Research in Electrical, Electronics, Instrumentation, and Control Engineering (IJIREEICE), National Conference on Advances in Electrical Engineering NCAEE, 2017.
  • [27] Shetty S. N. and Raheman Md. A., “Modelling of Dual Input DC/DC Converter for Hybrid Energy System”, 2th IEEE International Conference on Recent Trends in Electronics Information & Communication Technology RTEICT, 2017.
APA ŞEKER C, GÜNEŞER M, KUZEY Ş (2021). The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. , 201 - 206. 10.17694/bajece.855262
Chicago ŞEKER Cihat,GÜNEŞER M. Tahir,KUZEY Şakir The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. (2021): 201 - 206. 10.17694/bajece.855262
MLA ŞEKER Cihat,GÜNEŞER M. Tahir,KUZEY Şakir The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. , 2021, ss.201 - 206. 10.17694/bajece.855262
AMA ŞEKER C,GÜNEŞER M,KUZEY Ş The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. . 2021; 201 - 206. 10.17694/bajece.855262
Vancouver ŞEKER C,GÜNEŞER M,KUZEY Ş The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. . 2021; 201 - 206. 10.17694/bajece.855262
IEEE ŞEKER C,GÜNEŞER M,KUZEY Ş "The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation." , ss.201 - 206, 2021. 10.17694/bajece.855262
ISNAD ŞEKER, Cihat vd. "The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation". (2021), 201-206. https://doi.org/10.17694/bajece.855262
APA ŞEKER C, GÜNEŞER M, KUZEY Ş (2021). The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. Balkan Journal of Electrical and Computer Engineering, 9(2), 201 - 206. 10.17694/bajece.855262
Chicago ŞEKER Cihat,GÜNEŞER M. Tahir,KUZEY Şakir The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. Balkan Journal of Electrical and Computer Engineering 9, no.2 (2021): 201 - 206. 10.17694/bajece.855262
MLA ŞEKER Cihat,GÜNEŞER M. Tahir,KUZEY Şakir The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. Balkan Journal of Electrical and Computer Engineering, vol.9, no.2, 2021, ss.201 - 206. 10.17694/bajece.855262
AMA ŞEKER C,GÜNEŞER M,KUZEY Ş The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. Balkan Journal of Electrical and Computer Engineering. 2021; 9(2): 201 - 206. 10.17694/bajece.855262
Vancouver ŞEKER C,GÜNEŞER M,KUZEY Ş The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation. Balkan Journal of Electrical and Computer Engineering. 2021; 9(2): 201 - 206. 10.17694/bajece.855262
IEEE ŞEKER C,GÜNEŞER M,KUZEY Ş "The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation." Balkan Journal of Electrical and Computer Engineering, 9, ss.201 - 206, 2021. 10.17694/bajece.855262
ISNAD ŞEKER, Cihat vd. "The Topologies of Multi-Input Single-Output Non-Isolated DC-DC Converter for Distributed Power Generation". Balkan Journal of Electrical and Computer Engineering 9/2 (2021), 201-206. https://doi.org/10.17694/bajece.855262