Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete
Yıl: 2020 Cilt: 13 Sayı: 3 Sayfa Aralığı: 1252 - 1262 Metin Dili: İngilizce DOI: 10.18185/erzifbed.784711 İndeks Tarihi: 03-01-2022
Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete
Öz: Sulphur polymer concretes (SPC) are widely used in construction technologies as building materials in recent years. Knowing the strength changes of SPCs used in structural members during their service life is of great importance in terms of building health. Therefore, it is aimed to determine the long-term strength changes of bitumen modified SPCs within the scope of this study. First, the sulphur modification was made using 2.5% by weight of bitumen. Modified sulphur (MS) samples were examined with DSC and SEM to see if the modification was realized. Compressive, flexural and splitting tensile strength tests were carried out on SPC samples prepared with MS at the end of 1-hour, 1-day, 7, 28 and 360 days. Traditional Portland cement concrete (PCC) was prepared to be the same as the 28-day compressive strength of SPC, and the same tests were carried out to examine the results found comparatively. It was determined that the compressive, flexural and splitting tensile strength values of SPCs at the end of 1-hour reached 78%, 86% and 84%, respectively. It was determined that while the long-term strength values of PCCs increased, the long-term strength of SPCs decreased.
Anahtar Kelime: Kükürt Polimer Betonların Uzun Dönemli Mekanik Özelliklerinin İncelenmesi ve Portland Çimento Betonları ile Karşılaştırılması
Öz: Kükürt polimer betonlar (SPC), son yıllarda yapı malzemesi olarak inşaat teknolojilerinde yaygın bir şekilde kullanılmaktadır. Yapısal elemanlarda kullanılan SPC’lerin servis ömürleri boyunca dayanım değişimlerinin bilinmesi yapı sağlığı açısından oldukça büyük önem taşımaktadır. Bu nedenle bu çalışma kapsamında bitüm kullanılarak modifiye edilen SPC’lerin uzun süreli dayanım değişimlerinin belirlenmesi amaçlanmıştır. İlk olarak ağırlıkça % 2.5 oranında bitüm kullanılarak kükürt modifikasyonu yapılmıştır. Modifiye kükürt (MS) numuneleri DSC ve SEM ile incelenerek modifikasyonun gerçekleşip gerçekleşmediği incelenmiştir. MS ile hazırlanan SPC numuneleri üzerinde 1 saat ile 1, 7, 28 ve 360 gün sonunda basınç, eğilme ve yarma dayanımı deneyleri yapılmıştır. Bulunan sonuçların karşılaştırılmalı olarak incelenebilmesi için SPC’nin 28 günlük basınç dayanımları ile aynı olacak şekilde geleneksel Portland çimento beton (PCC) numuneleri hazırlanmış ve aynı deneyler gerçekleştirilmiştir. SPC’lerin 1 saat sonunda 28 günlük basınç, eğilme ve yarma dayanımı değerlerinin sırasıyla %78, %86 ve %84’üne ulaştığı belirlenmiştir. PCC’lerin uzun süreli dayanım değerlerinde artış olduğu ancak SPC’lerin uzun süreli dayanımlarında azalmalar meydana geldiği belirlenmiştir.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- Al-Otaibi, S., Al-Aibani, A., Al-Bahar, S., Abdulsalam, M., Al-Fadala S. 2018. “Potential for Producing Concrete Blocks Using Sulphur Polymeric Concrete in Kuwait”, JKSUES, 31(4), 327-331.
- Anyszka, R., Bielinski, D.M., Sicinski, M., Imiela, M., Szajerski, P., Pawlica, J., Walendziak, R. 2016. “Sulfur Concrete– Promising Material for Space–Structures Building”, European Conference on Spacecraft Structures Materials and Environmental, Toulouse, France.
- ASTM C-39. 2018. “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens”, American Society for Testing and Materials, Pennsylvania.
- ASTM C-293. 2016. “Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)”, American Society for Testing and Materials, Pennsylvania.
- ASTM C-496. 2017. “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens”, American Society for Testing and Materials, Pennsylvania.
- Bacon, R.F., Davis, H.S. 1921. “Recent Advances in the American Sulfur Industry”, Chemical and Metallurgical Engineering, 24, 65-72.
- Bordoloi, B.K., Pierce, E.M. 1978. “Plastic Sulfur Stabilization by Copolymerization of Sulfur with Dicyclopentadiene”, Adv. Chem., 31-53.
- Contreras, M., Gazquez, M.J., Garcia-Diaz, I., Alguacil,, F.J., Lopez F.A., Bolivar, J.P. 2013. “Valorization of Waste Ilmenite Mud in the Manufacture of Sulphur Polymer Cement”, J. Environ. Manage, 128, 625-630.
- Crow, L.J., Bates, R.C. (1970). “Strength of Sulfur-Basalt Concretes”, U.S. Bureau of Mines, Report No: RI 7349, 21.
- Dale, J.M., Ludwig, A.C. (1966). “Advanced Studies of Sulfur Aggregate Mixtures as a Structural Material”, Southwest Research Institute, Report No: AFWL-TR-68-21.
- Duecker, W.W. 1934. “Admixtures Improve Properties of Sulfur Cements”, Chemical Metallurgical Engineering, 41(11), 583-586.
- Grugel, R.N. 2012. “Integrity of Sulfur Concrete Subjected to Simulated Lunar Temperature Cycles”, Adv. Space Res., 50, 1294-1299.
- Hager, I., Golonka,, A., Putanowicz R. 2016. “3D Printing of Buildings and Building Components as the Future of Sustainable Construction”, Procedia Engineering, 151, 292-299.
- Khoshnevis, B., Yuan, X., Zahiri, B., Zhang, J., Xia, B. 2016. “Construction by Contour Crafting Using Sulfur Concrete with Planetary Applications”, Rapid Prototyp. J., 22(5), 848-856.
- Kobbe, W.H. 1924. “New Uses for Sulfur in Industry”, Industrial & Engineering Chemistry, 16(10), 26-1028.
- Lin, S.L., Lai, J.S., Chian, E.S.K. 1995. “Modification of sulfur polymer cement (spc) stabilization and solidification (s/s) process”, J. Waste Manag., 15, 441-447.
- Maraghechi, H., Ahmadi, I.F., Motahari, S. 2011. “Effect of Adding Crumb Tire Rubber Particles on the Mechanical Properties of DCPD-Modified Sulfur Polymer Mortars”, J Mech Mater Struct, 6(9-10), 1283-1294.
- McBee, W.C., Sullivan, T.A., Jong, B.W. (1983). “Corrosion Resistant Sulfur Concretes”, U.S. Bureau of Mines, Report No: 8758, 28.
- Mohamed, A.M.O., El Gamal, M.M. 2006. “Compositional Control on Sulfur Polymer Concrete Production for Public Works”, Development in Arid Regions Research, 3, 27-38.
- Mohamed, A.M.O., El Gamal M.M. 2007. “Sulfur Based Hazardous Waste Solidification”, Environ. Geol, 53(1), 159- 175.
- Mohamed, A.M.O., El Gamal, M.M. 2011. “Solidification of Cement Kiln Dust Using Sulfur Binder”, J. Hazard. Mater, 192, 576- 584.
- Mohamed, A.M.O., El-Dieb, A., El Sawy, K.M., El Gamal, M.M. 2014. “Durability of Modified Sulphur Concrete in Sewerage Environment”, Environ Geotech, 2(2), 1-9.
- Shin, M., Kim, K., Gwon,, S.W., Cha S. 2014. “Durability of Sustainable Sulfur Concrete with Fly Ash and Recycled Aggregate Against Chemical and Weathering Environments”, Constr Build Mater, 69, 167- 176.
- Tautanji, H.A., Evans, S., Grugel, R.N. 2010. “Performance of -Waterless Concrete-”, CPIC 2010–13th International Congress on Polymers in Concrete, Funchal-Maderia, Portugal.
- Vlahovic, M.M., Martinovic, S.P., Boljanac, T.D., Jovanic, P.B., Volkov-Husovic, T.D. 2011. “Durability of Sulfur Concrete in Various Aggressive Environments”, Constr Build Mater, 25, 3926-3934.
- Vroom, A.H. (1981). “Sulfur cements, process for making same and sulfur concretes made there from”, U.S. Patent No. 4,293,463.
- Yang, C., Lv, X., Tian, X., Wang, Y., Komarneni, S. 2014. “An Investigation on the Use of Electrolytic Manganese Residue as Filler in Sulfur Concrete”, Constr Build Mater, 73, 305-310.
- Yue, L., Caiyun,, J., Yunping X. 2006. “The Properties of Sulfur Rubber Concrete (SRC)”, J. Wuham Univ. Technol. Mater. Sci., 21(1), 129-133.
| APA | Ozturk O, ÖNER A (2020). Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. , 1252 - 1262. 10.18185/erzifbed.784711 |
| Chicago | Ozturk Onur,ÖNER Adnan Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. (2020): 1252 - 1262. 10.18185/erzifbed.784711 |
| MLA | Ozturk Onur,ÖNER Adnan Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. , 2020, ss.1252 - 1262. 10.18185/erzifbed.784711 |
| AMA | Ozturk O,ÖNER A Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. . 2020; 1252 - 1262. 10.18185/erzifbed.784711 |
| Vancouver | Ozturk O,ÖNER A Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. . 2020; 1252 - 1262. 10.18185/erzifbed.784711 |
| IEEE | Ozturk O,ÖNER A "Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete." , ss.1252 - 1262, 2020. 10.18185/erzifbed.784711 |
| ISNAD | Ozturk, Onur - ÖNER, Adnan. "Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete". (2020), 1252-1262. https://doi.org/10.18185/erzifbed.784711 |
| APA | Ozturk O, ÖNER A (2020). Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 13(3), 1252 - 1262. 10.18185/erzifbed.784711 |
| Chicago | Ozturk Onur,ÖNER Adnan Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi 13, no.3 (2020): 1252 - 1262. 10.18185/erzifbed.784711 |
| MLA | Ozturk Onur,ÖNER Adnan Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.13, no.3, 2020, ss.1252 - 1262. 10.18185/erzifbed.784711 |
| AMA | Ozturk O,ÖNER A Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 2020; 13(3): 1252 - 1262. 10.18185/erzifbed.784711 |
| Vancouver | Ozturk O,ÖNER A Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 2020; 13(3): 1252 - 1262. 10.18185/erzifbed.784711 |
| IEEE | Ozturk O,ÖNER A "Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete." Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 13, ss.1252 - 1262, 2020. 10.18185/erzifbed.784711 |
| ISNAD | Ozturk, Onur - ÖNER, Adnan. "Investigation of Long Term Mechanical Properties of Sulphur Polymer Concrete and Comparison with Portland Cement Concrete". Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi 13/3 (2020), 1252-1262. https://doi.org/10.18185/erzifbed.784711 |
