Fused Filament Fabrication (FFF), which is one of the additive manufacturing methods, has recently found industrial usage areas and has become frequently used. Industries using this production method can be listed as automotive, machine manufacturing, aerospace, etc. While heat and environmental resistance are important factors for parts such as fixtures and apparatus manufactured with this method, mechanical properties are often at forefront. In many studies, the properties of the materials used in FFF under static load have been investigated by tests such as tensile, compression, and bending. However, studies on mechanical properties under impact loading remained at a relatively low level. It is clear that material behavior under impact loading is important, especially for polymer materials. In this study, the impact resistance of notched Polylactic acid (PLA) samples produced by FFF method under different impact velocities were investigated. For this aim, a Charpy impact testing machine with low capacity (10J) was designed and manufactured, and the hammer was dropped from different heights and different velocity values were obtained. The instantaneous angle of the arm to which the hammer is attached was recorded by a gyro sensor and Arduino. Impact resistance values calculated depending on the impact speed were evaluated comparatively.