Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle

Mustafa Yaz, (Yozgat Bozok Üniversitesi, Mühendislik Mimarlık Fakültesi, Elektrik Elektronik Mühendisliği Bölümü, Yozgat, Türkiye)
EMRAH ÇETİN (Yozgat Bozok Üniversitesi, Mühendislik Mimarlık Fakültesi, Elektrik Elektronik Mühendisliği Bölümü, Yozgat, Türkiye)
International Journal of Automotive Science and Technology
3 0
Yıl: 2021 Cilt: 5 Sayı: 4 Sayfa Aralığı: 345 - 350 Metin Dili: İngilizce DOI: 10.30939/ijastech..984760 İndeks Tarihi: 29-07-2022

Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle

Öz:
Electric vehicles are increasing their place in the market with each passing day. The widespread use of this technology accelerates the development of sub-equipment in electric vehicles. Intensive studies are carried out for the develop-ment of many sub-equipment. One of the most important of these is the charging systems of electric vehicles. While electric vehicles are developing, charging systems are also developing rapidly in parallel. In this article, an integrated and isolated unidirectional lithium-ion battery charger design aspects has been im-plemented for a small-scale electric vehicle in three steps such as simulation, prototype and final product. As a result of the study, the prototype and final products are succeed on a 500 W DC load and the design aspects are demonstrat-ed.
Anahtar Kelime: Isolated Charger Electric Vehicle Unidirectional Battery Charger. Lithium-Ion Battery Battery Charger

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • [1] M. Yilmaz and P. T. Krein, "Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles," in IEEE Transactions on Power Electronics, vol. 28, no. 5, pp. 2151-2169, May 2013, doi: 10.1109/TPEL.2012.2212917.
  • [2] A. Sharma and R. Gupta, "PV-Battery Supported Level-1 DC Fast charger for Electric Vehicles," 2019 IEEE Students Conference on Engineering and Systems (SCES), 2019, pp. 1-5, doi: 10.1109/SCES46477.2019.8977218.
  • [3] Y. Lee, A. Khaligh and A. Emadi, "Advanced Integrated Bidirec- tional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Ve- hicles," in IEEE Transactions on Vehicular Technology, vol. 58, no. 8, pp. 3970-3980, Oct. 2009, doi: 10.1109/TVT.2009.2028070.
  • [4] B. Singh, B. N. Singh, A. Chandra, K. Al-Haddad, A. Pandey and D. P. Kothari, "A review of three-phase improved power quality AC- DC converters," in IEEE Transactions on Industrial Electronics, vol. 51, no. 3, pp. 641-660, June 2004, doi: 10.1109/TIE.2004.825341.
  • [5] S. Haghbin et al., "Integrated chargers for EV's and PHEV's: exam- ples and new solutions," The XIX International Conference on Elec- trical Machines - ICEM 2010, 2010, pp. 1-6, doi: 10.1109/ICELMACH.2010.5608152.
  • [6] M. Grenier, M. G. Hosseini Aghdam and T. Thiringer, "Design of on-board charger for plug-in hybrid electric vehicle," 5th IET Inter- national Conference on Power Electronics, Machines and Drives (PEMD 2010), 2010, pp. 1-6, doi: 10.1049/cp.2010.0101.
  • [7] H. V. Nguyen and D. Lee, "Single-phase multifunctional onboard battery chargers with active power decoupling capability," 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), 2018, pp. 3434-3439, doi: 10.1109/APEC.2018.8341597.
  • [8] T. Soong and P. W. Lehn, "On-board Single-Phase Electric Vehicle Charger with Active Front End," 2018 International Power Electron- ics Conference (IPEC-Niigata 2018 -ECCE Asia), 2018, pp. 3203- 3208, doi: 10.23919/IPEC.2018.8507547.
  • [9] Y. Zhang et al., "Leakage Current Issue of Non-Isolated Integrated Chargers for Electric Vehicles," 2018 IEEE Energy Conversion Con- gress and Exposition (ECCE), 2018, pp. 1221-1227, doi: 10.1109/ECCE.2018.8558133.
  • [10]H. V. Nguyen and D. Lee, "Advanced Single-Phase Onboard Chargers with Small DC-Link Capacitors," 2018 IEEE International Power Electronics and Application Conference and Exposition (PEAC), 2018, pp. 1-6, doi: 10.1109/PEAC.2018.8590400.
  • [11]J. Gao, W. Sun, D. Jiang, Y. Zhang and R. Qu, "Improved Operation and Control of Single-Phase Integrated On-Board Charger System," in IEEE Transactions on Power Electronics, vol. 36, no. 4, pp. 4752- 4765, April 2021, doi: 10.1109/TPEL.2020.3025664.
  • [12]C. A. Tuan, H. Naoki and T. Takeshita, "Unidirectional Isolated High-Frequency-Link DC-DC Converter Using Soft-Switching Technique," 2019 IEEE 4th International Future Energy Electronics Conference (IFEEC), 2019, pp. 1-7, doi: 10.1109/IFEEC47410.2019.9015117.
  • [13]A. Ghosh, C. N. Man Ho and K. K. Man Siu, "A Manitoba Converter based Bi-directional On-board charger for Plug-in Electric Vehicles," 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020, pp. 1654-1660, doi: 10.1109/ECCE44975.2020.9235606.
  • [14]M. Hagemeyer, P. Wallmeier, F. Schafmeister and J. Böcker, "Com- parison of Unidirectional Three- and Four-Wire-Based Boost PFC- Rectifier Topologies for Non-Isolated Three-Phase EV On-Board Chargers Under Common-Mode Aspects," 2021 IEEE Applied Power Electronics Conference and Exposition (APEC), 2021, pp. 569-576, doi: 10.1109/APEC42165.2021.9487036.
  • [15]M. Y. Metwly, M. S. Abdel-Majeed, A. S. Abdel-Khalik, R. A. Hamdy, M. S. Hamad and S. Ahmed, "A Review of Integrated On- Board EV Battery Chargers: Advanced Topologies, Recent Devel- opments and Optimal Selection of FSCW Slot/Pole Combination," in IEEE Access, vol. 8, pp. 85216-85242, 2020, doi: 10.1109/ACCESS.2020.2992741.
  • [16]Szymanski, J.R.; Zurek-Mortka, M.; Wojciechowski, D.; Poliakov, N. Unidirectional DC/DC Converter with Voltage Inverter for Fast Charging of Electric Vehicle Batteries. Energies 2020, 13, 4791. https://doi.org/10.3390/en13184791
  • [17]Moralı “Investigation of Open Circuit Potential of Lithium-Ion Bat- tery by The Taguchi Design” International Journal of Automotive Science and Technology 5 (2): 126-130, 2021, doi:10.30939/ija- stech..868549
  • [18]Ekici and Tan “Charge and discharge characteristics of different types of batteries on a hybrid electric vehicle model and selection of suitable battery type for electric vehicles” International Journal of Automotive Science and Technology 3 (4): 62-70, 2017, doi:10.30939/ijastech..527971
  • [19]M. Pahlevaninezhad, P. Das, J. Drobnik, P. K. Jain and A. Bakhshai, "A Novel ZVZCS Full-Bridge DC/DC Converter Used for Electric Vehicles," in IEEE Transactions on Power Electronics, vol. 27, no. 6, pp. 2752-2769, June 2012, doi: 10.1109/TPEL.2011.2178103.
APA YAZ M, cetin e (2021). Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. , 345 - 350. 10.30939/ijastech..984760
Chicago YAZ Mustafa,cetin emrah Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. (2021): 345 - 350. 10.30939/ijastech..984760
MLA YAZ Mustafa,cetin emrah Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. , 2021, ss.345 - 350. 10.30939/ijastech..984760
AMA YAZ M,cetin e Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. . 2021; 345 - 350. 10.30939/ijastech..984760
Vancouver YAZ M,cetin e Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. . 2021; 345 - 350. 10.30939/ijastech..984760
IEEE YAZ M,cetin e "Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle." , ss.345 - 350, 2021. 10.30939/ijastech..984760
ISNAD YAZ, Mustafa - cetin, emrah. "Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle". (2021), 345-350. https://doi.org/10.30939/ijastech..984760
APA YAZ M, cetin e (2021). Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. International Journal of Automotive Science and Technology, 5(4), 345 - 350. 10.30939/ijastech..984760
Chicago YAZ Mustafa,cetin emrah Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. International Journal of Automotive Science and Technology 5, no.4 (2021): 345 - 350. 10.30939/ijastech..984760
MLA YAZ Mustafa,cetin emrah Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. International Journal of Automotive Science and Technology, vol.5, no.4, 2021, ss.345 - 350. 10.30939/ijastech..984760
AMA YAZ M,cetin e Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. International Journal of Automotive Science and Technology. 2021; 5(4): 345 - 350. 10.30939/ijastech..984760
Vancouver YAZ M,cetin e Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle. International Journal of Automotive Science and Technology. 2021; 5(4): 345 - 350. 10.30939/ijastech..984760
IEEE YAZ M,cetin e "Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle." International Journal of Automotive Science and Technology, 5, ss.345 - 350, 2021. 10.30939/ijastech..984760
ISNAD YAZ, Mustafa - cetin, emrah. "Built-in Isolated Level 1 Unidirectional Battery Charger Design Aspects for a Small-Scale Electric Vehicle". International Journal of Automotive Science and Technology 5/4 (2021), 345-350. https://doi.org/10.30939/ijastech..984760
Sayfa Oluşturulma Tarihi
23-04-2024 22:6

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları