Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis
Yıl: 2021 Cilt: 8 Sayı: 3 Sayfa Aralığı: 617 - 622 Metin Dili: İngilizce DOI: 10.15311/selcukdentj.729494 İndeks Tarihi: 16-05-2022
Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis
Öz: Background: The purpose of the present study was to evaluatethe stress distributions of zirconia or titanium connecting screwsunder different loads (vertical and oblique) in bruxism patientsand to indicate its applicability by comparing with physiologicalstress limit values. Methods: Four different models were created in which theimplants were the same size and design, with dental implant,abutment and connection screws made of zirconia or Ti (onlyscrew). 3D-Finite element analysis (3D-FEA) was applied tostudy the effect of a vertical load (1000 N) and oblique load (anangle of 30°) on abutments in the models. The placement ofimplants are mandibular right first molar. Computerizedtomography imaging of cadaver mandibles was used. Von Misesstresses of the different screw materials were compared witheach other and the physiological stress limit values for zirconia. Results: Von Mises stress values increased in oblique loading inall models. The von Mises stress values were significantlyreduced in the titanium screw than zirconium under both loadingsimulations. Conclusion: In patients with a high biting force physiologicalstress limit values for zirconia were not exceeded. Zirconconnection screw may be used in patients with bruxism.
Anahtar Kelime: Bruksizm Hastalarında Zirkon Bağlantı Vidasının StresDağılımlarının Sonlu Elemanlar Analizi İle Değerlendirilmesi
Öz: Amaç: Çalışmanın amacı, bruksizm hastalarında farklımateryallerdeki implant-abutment bağlantı vidasında meydanagelen stress dağılımının değerlendirilmesidir. Ayrıca fizyolojik stresslimit değerleri ile karşılaştırılarak uygulanabilirliğini belirtmektir. Gereç ve Yöntemler: İmplantların, abutmentlerin ve bağlantıvidalarının aynı dizayn ve boyutta olduğu 4 model oluşturuldu.Bağlantı vidası titanium veya zircon olarak modellendi, diğermateryaller ise titanium olarak modellendi. Bruksizmli hastalarınısırma kuvvetinin taklidi için 1000 N dikey veya 30° açılı yüklemeabutmentlerin orta noktalarına uygulandı. Modellenen implant sağmandibular birinci molar hizasındadır. Mandibulanınmodellenmesinde kadavranın bilgisayarlı tomografi görüntülerikullanıldı. Farklı bağlantı vidası materyallerinde meydana gelen(zircon veya titanium) von Mises stress değerleri karşılaştırıldı.Ayrıca zirkonyum bağlantı vidasındaki von Mises stress değerlerizirkonyumun fizyolojik stress limit değeri ile karşılaştırıldı. Bulgular: Von Mises stres değerleri tüm modellerde 30° açılıyüklemede artmıştır. Von Mises stres değerleri, her iki yüklemesimülasyonunda titanyum vidada zirkonyuma göre önemli ölçüdeazaldı. Sonuç: Isırma kuvveti yüksek olan hastalarda zirkonyum fizyolojikstres limit değerleri aşılmamıştır. Bruksizm hastalarında zirkonbağlantı vidası kullanılmasında sakınca yoktur.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- 1. Villabona CA, Amorin Vasco MA, Ruales E, Bedoya KA, Benfatti CM, Bezzon OL, et al. ThreeDimensional Finite Element Analisys of Stress Distribution in Zirconia and Titanium Dental Implants. The Journal of oral implantology. 2018.
- 2. Ozkurt Z, Kazazoglu E. Zirconia dental implants: a literature review. The Journal of oral implantology. 2011;37(3):367-76.
- 3. Borgonovo AE, Censi R, Vavassori V, Dolci M, Calvo-Guirado JL, Delgado Ruiz RA, et al. Evaluation of the success criteria for zirconia dental implants: a four-year clinical and radiological study. International journal of dentistry. 2013;2013:463073.
- 4. Pieralli S, Kohal RJ, Jung RE, Vach K, Spies BC. Clinical Outcomes of Zirconia Dental Implants: A Systematic Review. Journal of dental research. 2017;96(1):38-46.
- 5. Bankoglu Gungor M, Yilmaz H. Evaluation of stress distributions occurring on zirconia and titanium implant-supported prostheses: A threedimensional finite element analysis. The Journal of prosthetic dentistry. 2016;116(3):346-55.
- 6. Choi AH, Matinlinna JP, Ben-Nissan B. Finite element stress analysis of Ti-6Al-4V and partially stabilized zirconia dental implant during clenching. Acta odontologica Scandinavica. 2012;70(5):353-61.
- 7. Kohal RJ, Att W, Bachle M, Butz F. Ceramic abutments and ceramic oral implants. An update. Periodontology 2000. 2008;47:224-43.
- 8. Rodriguez AE, Monzavi M, Yokoyama CL, Nowzari H. Zirconia dental implants: A clinical and radiographic evaluation. Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry [et al]. 2018.
- 9. Ayranci F, Sivrikaya EC, Omezli MM. Is bone density or implant design more important in implant stress formation in patients with bruxism? Biotechnol Biotec Eq. 2017;31(6):1221-5.
- 10.Van der Zaag J, Lobbezoo F, Van der Avoort PG, Wicks DJ, Hamburger HL, Naeije M. Effects of pergolide on severe sleep bruxism in a patient experiencing oral implant failure. Journal of oral rehabilitation. 2007;34(5):317-22.
- 11.Zhou Y, Gao J, Luo L, Wang Y. Does Bruxism Contribute to Dental Implant Failure? A Systematic Review and Meta-Analysis. Clinical implant dentistry and related research. 2016;18(2):410-20.
- 12.Sivrikaya EC, Omezli MM. The Effect Of Tapered And Cylindrical Implants On Stress Distribution In Different Bone Qualities: A Finite Element Analysis. The International journal of oral & maxillofacial implants. 2019;34(6):e99-e105.
- 13.Osman RB, Elkhadem AH, Ma S, Swain MV. Titanium versus zirconia implants supporting maxillary overdentures: three-dimensional finite element analysis. The International journal of oral & maxillofacial implants. 2013;28(5):e198-208.
- 14.Kourtis S, Damanaki M, Kaitatzidou S, Kaitatzidou A, Roussou V. Loosening of the fixing screw in single implant crowns: predisposing factors, prevention and treatment options. Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry [et al]. 2017;29(4):233-46.
- 15.da Silva LH, Ribeiro S, Borges AL, Cesar PF, Tango RN. FEA and microstructure characterization of a one-piece Y-TZP abutment. Dental materials : official publication of the Academy of Dental Materials. 2014;30(11):e283-8.
- 16.Macedo JP, Pereira J, Vahey BR, Henriques B, Benfatti CA, Magini RS, et al. Morse taper dental implants and platform switching: The new paradigm in oral implantology. European journal of dentistry. 2016;10(1):148-54.
- 17.Hisbergues M, Vendeville S, Vendeville P. Zirconia: Established facts and perspectives for a biomaterial in dental implantology. Journal of biomedical materials research Part B, Applied biomaterials. 2009;88(2):519-29.
- 18.Datte CE, Tribst JP, Dal Piva AO, Nishioka RS, Bottino MA, Evangelhista AM, et al. Influence of different restorative materials on the stress distribution in dental implants. Journal of clinical and experimental dentistry. 2018;10(5):e439-e44.
- 19.Gore E, Evlioglu G. Assessment of the effect of two occlusal concepts for implant-supported fixed prostheses by finite element analysis in patients with bruxism. The Journal of oral implantology. 2014;40(1):68-75.
- 20.Bozkaya D, Muftu S, Muftu A. Evaluation of load transfer characteristics of five different implants in compact bone at different load levels by finite elements analysis. The Journal of prosthetic dentistry. 2004;92(6):523-30.
- 21.Goiato MC, dos Santos DM, Santiago JF, Jr., Moreno A, Pellizzer EP. Longevity of dental implants in type IV bone: a systematic review. International journal of oral and maxillofacial surgery. 2014;43(9):1108-16.
- 22.Akca K, Iplikcioglu H. Finite element stress analysis of the influence of staggered versus straight placement of dental implants. The International journal of oral & maxillofacial implants. 2001;16(5):722-30.
- 23.Ciftci Y, Canay S. The effect of veneering materials on stress distribution in implant-supported fixed prosthetic restorations. The International journal of oral & maxillofacial implants. 2000;15(4):571-82.
- 24.Gharechahi J, Sharifi E, Aghdaee NA, Nosohian S. Finite element method analysis of the stress distribution to supporting tissues in a Class IV Aramany removable partial denture (Part I: the teeth and periodontal ligament). The journal of contemporary dental practice. 2008;9(6):65-72.
- 25.Koca OL, Eskitascioglu G, Usumez A. Threedimensional finite-element analysis of functional stresses in different bone locations produced by implants placed in the maxillary posterior region of the sinus floor. The Journal of prosthetic dentistry. 2005;93(1):38-44.
- 26.O'Brien WJ. Dental materials and their selection. 2nd ed. Chicago: Quintessence Pub. Co.; 1997. xii, 421 p. p.
- 27.Geng JP, Tan KB, Liu GR. Application of finite element analysis in implant dentistry: a review of the literature. The Journal of prosthetic dentistry. 2001;85(6):585-98.
- 28.Sevimay M, Turhan F, Kilicarslan MA, Eskitascioglu G. Three-dimensional finite element analysis of the effect of different bone quality on stress distribution in an implant-supported crown. The Journal of prosthetic dentistry. 2005;93(3):227-34.
- 29.Raimondi MT, Vena P, Pietrabissa R. Quantitative evaluation of the prosthetic head damage induced by microscopic third-body particles in total hip replacement. Journal of biomedical materials research. 2001;58(4):436-48
| APA | Sivrikaya E, Güler M, Bekci M (2021). Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. , 617 - 622. 10.15311/selcukdentj.729494 |
| Chicago | Sivrikaya Efe Can,Güler Mehmet Sami,Bekci Muhammed Latif Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. (2021): 617 - 622. 10.15311/selcukdentj.729494 |
| MLA | Sivrikaya Efe Can,Güler Mehmet Sami,Bekci Muhammed Latif Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. , 2021, ss.617 - 622. 10.15311/selcukdentj.729494 |
| AMA | Sivrikaya E,Güler M,Bekci M Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. . 2021; 617 - 622. 10.15311/selcukdentj.729494 |
| Vancouver | Sivrikaya E,Güler M,Bekci M Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. . 2021; 617 - 622. 10.15311/selcukdentj.729494 |
| IEEE | Sivrikaya E,Güler M,Bekci M "Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis." , ss.617 - 622, 2021. 10.15311/selcukdentj.729494 |
| ISNAD | Sivrikaya, Efe Can vd. "Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis". (2021), 617-622. https://doi.org/10.15311/selcukdentj.729494 |
| APA | Sivrikaya E, Güler M, Bekci M (2021). Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. Selcuk Dental Journal, 8(3), 617 - 622. 10.15311/selcukdentj.729494 |
| Chicago | Sivrikaya Efe Can,Güler Mehmet Sami,Bekci Muhammed Latif Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. Selcuk Dental Journal 8, no.3 (2021): 617 - 622. 10.15311/selcukdentj.729494 |
| MLA | Sivrikaya Efe Can,Güler Mehmet Sami,Bekci Muhammed Latif Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. Selcuk Dental Journal, vol.8, no.3, 2021, ss.617 - 622. 10.15311/selcukdentj.729494 |
| AMA | Sivrikaya E,Güler M,Bekci M Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. Selcuk Dental Journal. 2021; 8(3): 617 - 622. 10.15311/selcukdentj.729494 |
| Vancouver | Sivrikaya E,Güler M,Bekci M Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis. Selcuk Dental Journal. 2021; 8(3): 617 - 622. 10.15311/selcukdentj.729494 |
| IEEE | Sivrikaya E,Güler M,Bekci M "Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis." Selcuk Dental Journal, 8, ss.617 - 622, 2021. 10.15311/selcukdentj.729494 |
| ISNAD | Sivrikaya, Efe Can vd. "Evaluation of Stress Distributions of Zirconia Connecting Screw in Bruxism:A Finite Element Analysis". Selcuk Dental Journal 8/3 (2021), 617-622. https://doi.org/10.15311/selcukdentj.729494 |
