CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI

Başpınar Alper, Seval; Tekçe, Neslihan

doi:10.17567/ataunidfd.987310

CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI

Seval BAŞPINAR ALPER, (Kocaeli Üniversitesi Diş Hekimliği Fakültesi, Restoratif Diş Tedavisi ABD, Kocaeli Türkiye)

Neslihan TEKÇE (Kocaeli Üniversitesi Diş Hekimliği Fakültesi, Restoratif Diş Tedavisi ABD, Kocaeli Türkiye)

Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi

6 1

Yıl: 2021 Cilt: 31 Sayı: 4 Sayfa Aralığı: 576 - 583 Metin Dili: Türkçe DOI: 10.17567/ataunidfd.987310 İndeks Tarihi: 26-05-2022

CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI

Öz:

Amaç: Dual polimerize ve self adeziv rezin simanların renklenme özelliklerini değerlendirmek ve cila prosedürünün tekrarlanmasının restorasyonun renk stabilitesine etkisini araştırmaktır. Gereç ve Yöntem: Shofu Blok HC CAD/CAM materyalinden 12140,8 mm boyutlarında 40 adet kesit (n=10) elde edildi. Kesit yüzeyleri, 600 gritlik silikon karbid (SiC) zımpara ile zımparalandı ve Enhance Finishing System ile cilalandı. Kesitlerin diğer yüzeyi 50 μm Al2O3 kum ile pürüzlendirildi. CAD/CAM bloklar uygulanacak olan adeziv rezin siman ve bekletilecek sıvı tipine göre rastgele 4 gruba ayrıldı. Adeziv rezinler üretici talimatlarına göre CAD/CAM yüzeyine uygulandı ve polimerize edildi. Başlangıç renk ölçümleri beyaz arka plan üzerinde yapıldı. Daha sonra örnekler sitrik asitte ve distile suda bir hafta bekletildi ve renk ölçümü tekrarlandı. Ardından örneklerin dış yüzeylerine tekrar cila yapılıp renk ölçümü yapıldı ve ΔE değerleri hesaplandı. İstatistiksel analizde Shapiro Wilk Testi, Kruskal Wallis Tek yönlü varyans analizi ve Dunn’s testi kullanıldı. Bulgular: En düşük ΔE1 değeri Grup 4’te, en yüksek ΔE1 değeri Grup 2’de gözlendi (p<0.05). En düşük ΔE2 değeri Grup 2’de en yüksek ΔE2 değeri Grup 4’te gözlendi (p<0.05). ΔE değerleri arasında Grup 1 ve 2 için anlamlı farklılık tespit edildi (p<0.05). Sonuç: Self adeziv rezin siman sitrik asitte yaşlandırıldığında dual-cure rezin simandan daha az renklenme göstermiştir. Renklenmiş restorasyonlara tekrar cila uygulanması ile restorasyonun renk değişimi kullanılan adeziv rezin tipine bağlı olarak azalmıştır.

Anahtar Kelime:

THE EFFECTS OF DIFFERENT PARAMETERS ON THE COLOR STABILITY OF CAD/CAM RESTORATIONS

Öz:

Aim: To evaluate the color change properties of dual-cure and self-adhesive resin cements and to investigate the effect of repolishing procedure on the color stability of the restorations. Materials and Methods: 40 sections (n = 10) with dimensions of 12x14x0.8 mm were obtained from Shofu Blok. The section surfaces were roughened with 600 grit SİC abrasive under water cooling. Then sandblasted with 50 μm Al2O3 particles. The other surface of the samples was polished with Enhance Finishing System. CAD/CAM blocks were randomly divided into four groups according to the adhesive resin and liquid to be aged. Adhesive resins were applied to the CAD/CAM surface and polymerized. Then initial color measurements were made. Groups were stored in citric acid and distilled water for a week and color measurement was repeated. The surfaces of the samples were repolished then color measurements were made again and ΔE values were calculated. Shapiro Wilk Test, Kruskal Wallis One-way analysis of variance and Dunn's test were used in statistical analysis. Results: The lowest ΔE1 value was observed in Group 4, the highest ΔE1 value was observed in Group 2 (p<0.05). The lowest ΔE2 value was observed in Group 2, the highest ΔE2 value was observed in Group-4 (p<0.05). There was a significant difference between ΔE values for Group 1 and 2 (p<0.05). Conclusion: Self-adhesive resin showed less coloration than dual-cured resin when stored in citric acid. Repolishing of colored restorations reduced the color change of the restoration depending on the type of adhesive resin.

Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

1. Della Bona A, Pecho OE, Ghinea R, Cardona JC, Pérez MM. Colour parameters and shade correspondence of CAD–CAM ceramic systems. J Dent 2015;43:726-34.
2. Mörmann WH. The evolution of the CEREC system. J Am Dent Assoc 2006;137 Suppl:7S- 13S.
3. Duret F, Blouin JL, Duret B. CAD-CAM in dentistry. J Am Dent Assoc 1988;117:715-20.
4. Pallesen U, Qvist V. Composite resin fillings and inlays. An 11-year evaluation. Clin Oral Investig 2003;7:71-9.
5. Turgut S, Bagis B. Colour stability of laminate veneers: an in vitro study. J Dent 2011;39 Suppl 3:e57-e64.
6. Morimoto S, Albanesi R, Sesma N, Agra C, Braga M. Main Clinical Outcomes of Feldspathic Porcelain and Glass-Ceramic Laminate Veneers: A Systematic Review and Meta-Analysis of Survival and Complication Rates. Int J Prosthodont 2016;29:38-49.
7. Turgut S, Bagis B, Ayaz EA. Achieving the desired colour in discoloured teeth, using leucitebased cad-cam laminate Systems. J Dent 2014;42:68-74.
8. Ferrari M, Patroni S, Balleri P. Measurement of enamel thickness in relation to reduction for etched laminate veneers. Int J Periodontics Restorative Dent 1992;12:407-13.
9. Calgaro PA, Furuse AY, Correr GM, Ornaghi BP, Gonzaga CC. Post-cementation colorimetric evaluation of the interaction between the thickness of ceramic veneers and the shade of resin cement. Am J Dent 2014;27:191-4.
10. Della Bona A, Nogueira AD, Pecho OE. Optical properties of CAD–CAM ceramic systems. J Dent 2014;42:1202-9.
11. Vichi A, Ferrari M, Davidson CL. Influence of ceramic and cement thickness on the masking of various types of opaque posts. J Prosthet Dent 2000;83:412-7.
12. Pop-Ciutrila IS, Dudea D, Eugenia Badea M, Moldovan M, Cîmpean SI, Ghinea R. Shade Correspondence, Color, and Translucency Differences between Human Dentine and a CAD/CAM Hybrid Ceramic System. J Esthet Restor Dent 2016;28 Suppl 1:S46-S55.
13. Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: A review of the current literature. J Prosthet Dent 1998;80:280-301.
14. Berrong JM, Weed RM, Schwartz IS. Color Stability of Selected Dual-Cure Composite Resin Cements. J Prosthodont 1993;2:24-7.
15. Archegas LR, Freire A, Vieira S, Caldas DB, Souza EM. Colour stability and opacity of resin cements and flowable composites for ceramic veneer luting after accelerated ageing. J Dent 2011;39:804-10.
16. Kilinc E, Antonson SA, Hardigan PC, Kesercioglu A. Resin cement color stability and its influence on the final shade of all-ceramics. J Dent 2011;39 Suppl 1:e30-6.
17. Ferracane JL, Stansbury JW, Burke FJ. Selfadhesive resin cements-chemistry, properties and clinical considerations. J Oral Rehabil 2011;38:295-314.
18. Salz U, Zimmermann J, Salzer T. Self-curing, selfetching adhesive cement systems. J Adhes Dent 2005;7:7-17.
19. Pissaia JF, Correr GM, Gonzaga CC, da Cunha LF. Influence of shade, curing mode, and aging on the color stability of resin cements. Braz J Oral Sci 2015;14:272-5.
20. Hernandes DKL, Arrais CAG, de Lima E, Cesar PF, Rodrigues JA. Influence of resin cement shade on the color and translucency of ceramic veneers. J Appl Oral Sci 2016;24:391-6.
21. Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater 2004;20:530-4.
22. Calamia JR, Calamia CS. Porcelain Laminate Veneers: Reasons for 25 Years of Success. Dent Clin North Am 2007;51:399-417.
23. Ferracane JL, Moser JB, Greener EH. Ultraviolet light-induced yellowing of dental restorative resins. J Prosthet Dent 1985;54:483-7.
24. Sanares AM, Itthagarun A, King NM, Tay FR, Pashley DH. Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites. Dent Mater 2001;17:542-56.
25. Arrais CA, Giannini M, Rueggeberg FA. Kinetic analysis of monomer conversion in auto- and dual-polymerizing modes of commercial resin luting cements. J Prosthet Dent 2009;101:128- 36.
26. Sideridou I, Achilias DS, Spyroudi C, Karabela M. Water sorption characteristics of light-cured dental resins and composites based on Bis- EMA/PCDMA. Biomaterials 2004;25:367-76.
27. Almeida JR, Schmitt GU, Kaizer MR, Boscato N, Moraes RR. Resin-based luting agents and color stability of bonded ceramic veneers. J Prosthet Dent 2015;114:272-7.
28. Moharamzadeh K, Van Noort R, Brook IM, Scutt AM. HPLC analysis of components released from dental composites with different resin compositions using different extraction media. J Mater Sci Mater Med 2007;18:133-7.
29. Magalhães AP, Cardoso Pde C, de Souza JB, Fonseca RB, Pires-de-Souza Fde C, Lopez LG. Influence of activation mode of resin cement on the shade of porcelain veneers. J Prosthodont 2014;23:291-5.
30. Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials 2003;24:655-65.
31. Lu H, Powers JM. Color stability of resin cements after accelerated aging. Am J Dent 2004;17:354- 8.
32. Koishi Y, Tanoue N, Atsuta M, Matsumura H. Influence of visible-light exposure on colour stability of current dual-curable luting composites. J Oral Rehabil 2002;29:387-93.
33. Marchionatti AME, Wandscher VF, May MM, Bottino MA, May LG. Color stability of ceramic laminate veneers cemented with lightpolymerizing and dual-polymerizing luting agent: A split-mouth randomized clinical trial. J Prosthet Dent 2017;118:604-10.
34. Yesilyurt C, Yoldas O, Altintas SH, Kusgoz A. Effects of food-simulating liquids on the mechanical properties of a silorane-based dental composite. Dent Mater J 2009;28:362-7.
35. Yap AU, Chew CL, Ong LF, Teoh SH. Environmental damage and occlusal contact area wear of composite restoratives. J Oral Rehabil 2002;29:87-97.
36. Cho BH, Lim YK, Lee YK. Comparison of the color of natural teeth measured by a colorimeter and Shade Vision System. Dent Mater 2007;23:1307- 12.
37. Myers ML, Caughman WF, Rueggeberg FA. Effect of restoration composition, shade, and thickness on the cure of a photoactivated resin cement. J Prosthodont 1994;3:149-157.
38. Devigus A, Lombardi G. Shading Vita In-ceram YZ substructures: influence on value and chroma, part II. Int J Comput Dent 2004;7:379-88.
39. Tabatabaei MH, Matinfard F, Ahmadi E, Ranjbar Omrani L, Sadeghi Mahounak F. Color Stability of Ceramic Veneers Cemented with Self-Adhesive Cements after Accelerated Aging. Front Dent 2019;16:393-401.
40. Silva TMD, Sales ALLS, Pucci CR, Borges AB, Torres CRG. The combined effect of foodsimulating solutions, brushing and staining on color stability of composite resins. Acta Biomater Odontol Scand 2017;3:1-7.
41. Benetti AR, Ribeiro de Jesus VC, Martinelli NL, Pascotto RC, Poli-Frederico RC. Colour stability, staining and roughness of silorane after prolonged chemical challenges. J Dent 2013;41:1229-35.
42. Kurt M, Yamali Y, Bankoglu Gungor M, Karakoca N, Turhan Bal B. Effect of food-simulating liquids on the color change of selfadhesive resin cements. J Dent Fac Atatürk Uni 2021;31:234-40.
43. Türkün LS, Türkün M. Effect of bleaching and repolishing procedures on coffee and tea stain removal from three anterior composite veneering materials. J Esthet Restor Dent 2004;16:290- 302.
44. Rosentritt M, Esch J, Behr M, Leibrock A, Handel G. In vivo color stability of resin composite veneers and acrylic resin teeth in removable partial dentures. Quintessence Int 1998;29:517- 22.
45. Garoushi S, Lassila L, Hatem M, et al. Influence of staining solutions and whitening procedures on discoloration of hybrid composite resins. Acta Odontol Scand 2013;71:144-50.

APA	Başpınar Alper S, Tekçe N (2021). CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. , 576 - 583. 10.17567/ataunidfd.987310
Chicago	Başpınar Alper Seval,Tekçe Neslihan CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. (2021): 576 - 583. 10.17567/ataunidfd.987310
MLA	Başpınar Alper Seval,Tekçe Neslihan CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. , 2021, ss.576 - 583. 10.17567/ataunidfd.987310
AMA	Başpınar Alper S,Tekçe N CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. . 2021; 576 - 583. 10.17567/ataunidfd.987310
Vancouver	Başpınar Alper S,Tekçe N CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. . 2021; 576 - 583. 10.17567/ataunidfd.987310
IEEE	Başpınar Alper S,Tekçe N "CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI." , ss.576 - 583, 2021. 10.17567/ataunidfd.987310
ISNAD	Başpınar Alper, Seval - Tekçe, Neslihan. "CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI". (2021), 576-583. https://doi.org/10.17567/ataunidfd.987310

APA	Başpınar Alper S, Tekçe N (2021). CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 31(4), 576 - 583. 10.17567/ataunidfd.987310
Chicago	Başpınar Alper Seval,Tekçe Neslihan CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 31, no.4 (2021): 576 - 583. 10.17567/ataunidfd.987310
MLA	Başpınar Alper Seval,Tekçe Neslihan CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, vol.31, no.4, 2021, ss.576 - 583. 10.17567/ataunidfd.987310
AMA	Başpınar Alper S,Tekçe N CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2021; 31(4): 576 - 583. 10.17567/ataunidfd.987310
Vancouver	Başpınar Alper S,Tekçe N CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2021; 31(4): 576 - 583. 10.17567/ataunidfd.987310
IEEE	Başpınar Alper S,Tekçe N "CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI." Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 31, ss.576 - 583, 2021. 10.17567/ataunidfd.987310
ISNAD	Başpınar Alper, Seval - Tekçe, Neslihan. "CAD/CAM RESTORASYONLARIN RENK STABİLİTELERİ ÜZERİNDE FARKLI PARAMETLERİN FARKI". Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 31/4 (2021), 576-583. https://doi.org/10.17567/ataunidfd.987310