Current Reconstruction for PMSM Drives Using a DC-Link Single
Current Sensor

ÇAVUŞ, Barış; AKTAS, MUSTAFA

doi:10.5152/electrica.2021.21015

Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor

Mustafa AKTAŞ, (Ondokuz Mayıs Üniversitesi, Mühendislik Fakültesi, Elektrik-Elektronik Mühendisliği Bölümü, Samsun, Türkiye)

Barış ÇAVUŞ (Ondokuz Mayıs Üniversitesi, Mühendislik Fakültesi, Elektrik-Elektronik Mühendisliği Bölümü, Samsun, Türkiye)

Electrica

11 5

Yıl: 2022 Cilt: 22 Sayı: 1 Sayfa Aralığı: 101 - 108 Metin Dili: İngilizce DOI: 10.5152/electrica.2021.21015 İndeks Tarihi: 03-07-2022

Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor

Öz:

This article presents field-oriented control of permanent magnet synchronous motor (PMSM) with single current sensor (DC-link). Field-oriented control requires current values flowing from three phases of the motor. These currents can be determined by current sensors to be connected to the phases as well as DC-link current sensor to be connected to supply side of invertor. Only one current value is determined by DC-link sensor. In this method, current reconstruction method is used to determine the current flowing from three phases. In this study, two different methods were compared. The mean value method and the least squares method were used to determine the current flowing through three phases using the current value measured from the DC-link current sensor. Performance evaluation of these two methods was made by comparing the integral squared error and total harmonic distortion values of the three phase currents obtained.

Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

1. O. Saadaoui, A. Khlaief, A. Chaari and M. Boussak, “A new approach rotor speed estimation for PMSM on sliding mode observer,” J. Autom. Syst. Eng., vol. 9, pp. 66–78, 2015.
2. L. Harnefors, S. E. Saarakkala and M. Hinkkanen, “Speed control of electrical drives using classical control methods,” IEEE Trans. Ind. Appl., vol. 49, no. 2, pp. 889–898, 2013.
3. M. Abassi, A. Khlaief, O. Saadaoui, A. Chaari and M. Boussak, “Performance analysis of FOC and DTC for PMSM drives using SVPWM technique,” in 2015 16th Int. Conf. Sci. Tech. Autom. Control Comput. Eng. (STA), Monastir, Tunisia, 2015, pp. 228–233.
4. V. M. Bida, D. V. Samokhvalov and F. S. Al-Mahturi, “PMSM vector control techniques: A survey.” in 2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, Moscow, 2018, pp. 577–581.
5. A. Kronberg, “Design and Simulation of Field Oriented Control and Irect Torque Control for a Permanent Magnet Synchronous Motor with Positive Saliency,” M.S. thesis, Maj., Uppsala University, Uppsala, Sweden, 2012.
6. M. Sebba, S. Hassaine, S. Moreau and A. Chaker, “Analyse et synthèse d’une structure de contrôle vectoriel simplifiée associée au couple de charge appliquée au moteur synchrone à aimant permanents,” Acta Electrotechn., vol. 50, no. 2, 2009.
7. G. Chandaka and G. Prasanth, “Direct torque control and field oriented control of PMSM using SVPWM Technique,” Int. J. Adv. Res. Sci. Eng., vol. 3, no. 11, pp. 274–283, 2014.
8. Z. Boulghasoul, A. Elbacha and E. Elwarraki, “Performance of Fuzzy Anti Windup Compensator for PI Type Speed Controller in IM Drives,” in The 2nd International Conference on Industriel Systems and Logisitics, 2010.
9. Z. Boulghasoul, A. Elbacha, E. Elwarraki and D. Yousfi, “Combined Vector Control and Direct Torque Control and Experimental Review and Evaluation,” in International Conference on Multimedia Computing and Systems, 2011, pp. 1–6.
10. F. Blashke, “A new method for the structural decoupling of a A.C. induction machines,” in Conf. Rec. IFAC, 1971, pp. 1–15.
11. D. Casadei, F. Profurno, G. Serra and A. Tani, “FOC and DTC: Two viable schemes for induction motors torque control,” IEEE Trans. Power Electron., vol. 17, no. 5, pp. 779–787, 2002.
12. B. Wu, “High-Power Converters and AC Drives,” IEEE Press, 2006.
13. Y. Xu, H. Yan, J. Zou, B. Wang and Y. Li, “Zero voltage vector sampling method for PMSM three-phase current reconstruction using single current sensor,” IEEE Trans. Power Electron., vol. 32, no. 5, p. 3797–3807, 2017.
14. Y. Cho, T. Labella and J. S. Lai, “A three-phase current reconstruction strategy with online current offset compensation using a single current sensor,” IEEE Trans. Ind. Electron., vol. 59, no. 7, p. 2924–2933, 2012.
15. M. Pacas, “Sensorless drives in industrial applications,” IEEE Ind. Electron. Mag., vol. 5, no. 2, pp. 16–23, 2011.
16. W. Jiang and B. Fahimi, “Current reconstruction techniques for survivable three-phase PWM converters,” IEEE Trans. Power Electron., vol. 25, no. 1, pp. 188–192, 2010.
17. U. Rieder, M. Schroedl and A. Ebner, “Sensorless control of an external rotor PMSM in the whole speed range including standstill using DC-link measurements only,” in 2004 IEEE 35th Annual Power Electronics Specialists Conference, Aachen, Germany, vol. 2, 2004, pp. 1280–1285, IEEE Cat. No. 04CH37551. [CrossRef]
18. A. Piippo, K. Suomela, M. Hinkkanen and J. Luomi, “Sensorless PMSM drive with DC-link current measurement,” in 2007 IEEE Industry Applications Annual Meeting, New Orleans, LA, 2007, pp. 2371–2377. [CrossRef]
19. H. Yeom, H. Ku and J. Kim, “Current reconstruction method for PMSM drive system with a DC link shunt resistor,” in 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 2016, pp. 1–6. [CrossRef]
20. A. Ahmed, Y. Sozer and M. Hamdan, “Maximum torque per ampere control for buried magnet PMSM based on DC-link power measurement,” IEEE Trans. Power Electron., vol. 32, no. 2, pp. 1299–1311, 2017. [CrossRef]
21. A. Kraemer, V. Heusinger, S. Schad and A. Ali, “Sensorless vector control of PMSM with observer-based phase current reconstruction using only a DC-link current sensor,” in IEEE International Symposium on Sensorless Control for Electrical Drives (SLED), Catania, 2017, 2017, pp. 145–150. [CrossRef]
22. H. Li, Y. Qian, S. Asgarpoor and H. Sharif, “PMSM current sensor FDI based on DC link current estimation,” in 2018 IEEE 88th Vehicular Technology Conference (VTC-Fall), Chicago, IL, USA, 2018, pp. 1–5. [CrossRef]
23. J. Lu, X. Zhang, Y. Hu, J. Liu, C. Gan and Z. Wang, “Independent phase current reconstruction strategy for IPMSM sensorless control without using null switching states,” IEEE Trans. Ind. Electron., vol. 65, no. 6, pp. 4492–4502, 2018.
24. W. Wang et al., “New three-phase current reconstruction for PMSM drive with hybrid space vector pulsewidth modulation technique,” IEEE Trans. Power Electron., vol. 36, no. 1, pp. 662–673, 2021.
25. Y. Yue, R. Zhang, B. Wu and W. Shao, “Direct torque control method of PMSM based on fractional order PID controller,” in IEEE 6th Data Driven Control and Learning Systems Conference, 2017, pp. 411–415.
26. D. Y. Ohm, J. W. Brown and V. B. Chava, “Modeling and parameter characterization of permanent magnet synchronous motors,” in Annual Symposium of Incremental Motion Control Systems and Devices, 1995, pp. 81–86.
27. T. P. Ryan, “Modern Regression Methods,” New York: John Wiley Sons, 1997.

APA	AKTAS M, ÇAVUŞ B (2022). Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. , 101 - 108. 10.5152/electrica.2021.21015
Chicago	AKTAS MUSTAFA,ÇAVUŞ Barış Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. (2022): 101 - 108. 10.5152/electrica.2021.21015
MLA	AKTAS MUSTAFA,ÇAVUŞ Barış Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. , 2022, ss.101 - 108. 10.5152/electrica.2021.21015
AMA	AKTAS M,ÇAVUŞ B Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. . 2022; 101 - 108. 10.5152/electrica.2021.21015
Vancouver	AKTAS M,ÇAVUŞ B Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. . 2022; 101 - 108. 10.5152/electrica.2021.21015
IEEE	AKTAS M,ÇAVUŞ B "Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor." , ss.101 - 108, 2022. 10.5152/electrica.2021.21015
ISNAD	AKTAS, MUSTAFA - ÇAVUŞ, Barış. "Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor". (2022), 101-108. https://doi.org/10.5152/electrica.2021.21015

APA	AKTAS M, ÇAVUŞ B (2022). Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. Electrica, 22(1), 101 - 108. 10.5152/electrica.2021.21015
Chicago	AKTAS MUSTAFA,ÇAVUŞ Barış Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. Electrica 22, no.1 (2022): 101 - 108. 10.5152/electrica.2021.21015
MLA	AKTAS MUSTAFA,ÇAVUŞ Barış Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. Electrica, vol.22, no.1, 2022, ss.101 - 108. 10.5152/electrica.2021.21015
AMA	AKTAS M,ÇAVUŞ B Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. Electrica. 2022; 22(1): 101 - 108. 10.5152/electrica.2021.21015
Vancouver	AKTAS M,ÇAVUŞ B Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor. Electrica. 2022; 22(1): 101 - 108. 10.5152/electrica.2021.21015
IEEE	AKTAS M,ÇAVUŞ B "Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor." Electrica, 22, ss.101 - 108, 2022. 10.5152/electrica.2021.21015
ISNAD	AKTAS, MUSTAFA - ÇAVUŞ, Barış. "Current Reconstruction for PMSM Drives Using a DC-Link Single Current Sensor". Electrica 22/1 (2022), 101-108. https://doi.org/10.5152/electrica.2021.21015