Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi
Proje Grubu: MAG Sayfa Sayısı: 81 Proje No: 105M214 Proje Bitiş Tarihi: 01.05.2008 Metin Dili: Türkçe İndeks Tarihi: 29-07-2022
Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi
Öz: -
Anahtar Kelime: Erişim Türü: Erişime Açık
- ADAMS, R.D., Comyn, J., Wake, W.C., Structural Adhesive Joints in Engineering, Chapman and Hall, London, (1997). Pp:167
- ANDURET, R.H., Special 2-D and 3-D Geomtrically Non-Linear Finite Elements for Analysis of Adhesively Bonded Joints, (Ph.D.), The Faculyt of the Virginia Polytechnic Institute and State University, Blackburg, Virginia, (1998).
- APALAK, M.K., Güneş, R., Fidancı, L., Geometrically Non-Linear Thermal Stress Analysis of an Adhesively Bonded Tubular Single Lap Joint, Finite Elements in Analysis and Design, 39, 155-174, (2003).
- ASM, Engineered Materials Handbook, Adhesives and Sealants, Vol: 3, (1990). Pp: 560.
- ASTM D950-3, Standart Test Method for Impact Strength of Adhesive Bonds, (2003).
- AYDIN, M.D. Yapıştırıcı ile Birleştirilmiş Tek Tesirli Bindirme Bağlantısının Mekanik Özelliklerinin Deneysel ve Teorik İncelenmesi, (Doktora Tezi), Atatürk Üniversitesi Fen Bilimleri Enstitüsü, Erzurum, (2003).
- BAGHARI, R., Marouf, B.T., Fracture Behavior of Multi-Layered Composites Under Impact Loading, Materials Science and Engineering, 448, 20-24, (2007).
- BEZEMER, A.A., Guyt, C.B., Vlot, A., New Impact Specimen for Adhesives Optimization df High-Speed-Loaded Adhesive Joints, International Journal of Adhesion and Adhesives, 18, 255–260, (1998).
- BHADESHIA, H.K.D.H., Neural Networks In Materials Science, ISIJ International, 39, 966-979, (1999)
- CIBA, Ciba User’s Guide to Adhesive, Surface Preparation and Pretreatment, Ciba Specalty Chemicals, Switzerland, (1999). Pp: 40.
- GEORGE, B., Touyeras, F., Grohens, Y., Vebrel, J., Analysis of Curing Mode and Mechanical Properties of an Anaerobic Adhesive. European Polymer Journal, 34, 399-404, (1998).
- GOGLIO, L., Rossetto M., Impact Rupture of Structural Adhesive Joints Under Different Stres Combinations, International Journal of Impact Engineering, 35, 635- 643, (2008).
- HIGUCHI, I., Sawa, T., Okuno, H., Kato, S., Three-Dimensional Finite Element Analysis of Stress Response in Adhesive Butt Joints Subjected to Impact Bending Moments, Journal of Adhesion,79, 1017-1039, (2003).
- HIGUCHI, I., Sawa, T., Suga, H., Three-Dimensional Finite Element Analysis of Single-Lap Adhesive Joints Subjected to Impact Bending Moments, Journal of Adhesion Science and Technology, 16, 1327-1342, (2002).
- KIHARA, K., Isono, H., Yamabe, H., Sugibayashi, T., A Study and Evaluation of The Shear Strength of Adhesive Layers Subjected to Impact Loads, International Journal of Adhesion and Adhesives, 23, 253-259, (2003).
- KINLOCH, A.J., Adhesion and Adhesives Science and Technology, Chapman and Hall, London, (1987). Pp: 441.
- KINLOCH, A.J., Adhesives in Engineering, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 307-335, (1997).
- KONG, L.X., Hodgso, P.D., Applicaton of Costitutive and Artificial Neural Network Models to Predict The Hot Strength of Steels, ISIJ International, 39, 991-998, (1999).
- KRENK, S., Jönsson, J., Hansen, L.P., Fatigue Analysis and Testing of Adhesive Joints, Engineering Fracture Mechanics, 53, 859-872, (1996).
- KUMAR, P., Tiwari, S., Singh, R.K., Characterization of Toughened Bonded Interface Against Fracture and Impact Loads, International Journal of Adhesion and Adhesives, 25, 527-533, (2005).
- KWON, J.W., Lee, D.G., The Effects of Surface Roughness and Bond Thickness on The Fatigue Life of Adhesively Bonded Tubular Single Lap Joints, Journal of Adhesion Science and Technology, 14, 1085–1102, (2000).
- LEE, S.J., Lee, D.G., Development of Fatigue Failure Modal Fort He Adhesively Bonded Tubular Single Lap Joint Under Dynamic Torsional Loading, Journal of Adhesion, 56, 157-169, (1996).
- LEE, W.S., Lee, D.G., Static and Dynamic Torque Characteristics of Composite Cocured Single Lap Joints, Journal of Composite Materials, 31, 2188-2201, (1997).
- LIU, J., Sawa, T., Stress Analysis and Strength Evaluation of Single Lap Band Adhesive of Dissimilar Adherends Subjected to External Bending Moment, Journal of Adhesion Science and Technology, 14, 67-92, (2000).
- LOCTITE CORPORATION, Loctite Worldwide Design Handbook, Second Edition, on CD, (1998).
- LUCKYRAM, J., Vardy, A.E., Fatigue Performance of Two Structural Adhesives, Journal of Adhesion, 26, 273-29, (1988).
- MACKAY, D.J.C., A Practical Bayesian Framework for Backpropagation Networks, Neural Computation, 4, 448-456, (1992).
- MALINOV, S., Sha, W., Application of Artificial Neural Networks For Modelling Correlations in Titanium Alloys, International Conference On Multiscale Materials Modelling, UK. (2002)
- MALINOVA, T., Malinov, S., Pantev U.N., Surface and Coatings Technology, 135, 258-267, (2001).
- MAZUMDAR, S.K., Mallick, P.K., Static and Fatigue Behaviour of Adhesive Joints in SMC-SMC Composites, Polymer Composites, 19, 139-146, (1998).
- MODEL MANAGER®, Neuromat Ltd., www.neuromat.com, (2003).
- OHDAR, R.K., Pahsa, S., Prediction of The Process Parametres of Metal Powder Preform Forging Using Artificial Neural Network (ANN), Journal of Materials Processing Technology, 132, 227-334, (2003).
- OZEL, A., Kadıoğlu, F., Sen, S., Sadeler, R., Finite Element Analysis of Adhesive Joints in Four Point Bending Load, Journal of Adhesion, 79, 683-697, (2003).
- OZTEMEL, E., Artificial Neural Networks, Istanbul, Papatya, (2003).
- PANDEY, P.C., Shankaragouda, H., Singh, A.K., Non-Linear Analysis of Adhesively Bonded Lap Joints Considering Visco-Plasticity in Adhesives, Computers and Structures, 70, 387-413, (1999).
- PERZYK M., Kochanski, A.W., Prediction of Ductile Cast Iron Quality by Artificial Neural Networks, Journal of Materials Processing Technology, 109, 305-307, (2001).
- PFEIFFER, P., Shakal, M., Effect of Bonded Metal Substrate Area and its Thickness on the Strength and Durability of Adhesively Bonded Joints, J. of Adhesion Sci. Technology, 12, 339-348, (1998).
- RAMANI, K., Zhao, W., The Evaluation of Residual Stresses in Thermoplastic Bonding to Metal, International Journal of Adhesion and Adhesives, 17, 353-357, (1997).
- ROMANOS, G., Strength Evaluation of Axisymetric Bonded Joints Using Anaerobic Adhesives, International Journal of Materials and Product Technology, 14, 430- 443, (1999).
- SANCAKTAR, E., Simmons, S.R., Optimization of Adhesively Bonded Single Lap Joints by Adherent Notching, Journal of Adhesion Science and Technology, 14, 1363-1404, (2000).
- SATO, C., Ikegami, K., Dynamic Deformation of Lap Joints and Scarf Joints under Impact Loads, International Journal of Adhesion and Adhesives, 20, 17-25, (2000).
- SATO, C., Iwata, H., Ikegami, K., Dynamic Deformation of Tapered Lap Adhesive Joint under Impact Loading, JSME International Journal, Series A, 40, 31-36, (1997).
- SAWA, T., Hıguchı, I., Suga, H., Three-Dimensional Finite Element Analysis of Single-Lap Adhesive Joints Under Impact Loads, Journal of Adhesion Science and Technology, 16, 1585-1601, (2002b).
- SAWA, T., Lıu, J., Nakano, K., Tanaka, J., A Two Dimensional Stress Analysis of Single Lab Adhesive Joints of Dissimilar Adherents Subjected to Tensile Loads, Journal of Adhesion Science and Technology, 14, 43-66, (2000).
- SAWA, T., Suzukı, Y., Kıdo, S., FEM Stress Analysis and Strength of Adhesive Butt Joints of Similar Hollow Cylinder Under Static and Impact Tensile Loadings, Journal of Adhesion Science Technology, 16, 1449–1468, (2002a).
- SAWA, T., Uchida, H., A Two Dimensional Stress Analysis and Strength Evaluation of Hand Adhesive Butt Joints Subjected to Tensile Loads, Journal of Adhesion Science and Technology, 11, 811-833, (1997).
- SONG, R., Zhang, Q., Tseng, M., Zhang, B., The Application of Artificial Neural Netwoks to The Investigation of Aging Dynamics In 7175 Aluminium Alloys, Materials Science and Engineering, C3, 39-41, (1995).
- TS EN ISO 10365, Yapıştırıcılar- Başlıca Kusurların Gösterilmesi, (2001).
- TS EN ISO 11343, Yapıştırıcılar - Yüksek Mukavemetli Yapıştırıcıların Darbeli Uygulamalarda Ayrılmaya Karşı Dinamik Dayanımının Tayini - Kamalı Darbe Metodu, (2006).
- VITEK, J.M., Neural Network Applied to Welding: Two Examples, ISIJ International, 39, 1088-1095, (1999).
- WANG, Y., Blackman, B.R.K., Kınloch, A.J., Taylor, A.C., The Impact Wedge-Peel Performance of Structural Adhesives, Journal of Materials Science, 35, 1867-1884, (2000).
- WOLDESENBET, E., Aga, Z.A., Bond Thickness Effect on Impact Response and Damage of Adhesively-Bonded Graphite/Epoxy Composites, Journal of Adhesion Science and Technology, 21, 21-34, (2007).
- WONG, C.P., Rao Y., Lu, D., A Study of Impact Performance of Conductive Adhesives, International Journal of Adhesion and Adhesives, 24, 449–453, (2004).
- XU, X.X., Crocombe, A.D., Smith, P.A., Fatigue Crack Growth Rates in Adhesive Joints Tested at Different Frequencies, Journal of Adhesion, 58, 191-204, (1996).
| APA | SEKERCIOGLU T, GÜLSÖZ A, KOVAN V, ÖZENÇ M (2008). Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. , 1 - 81. |
| Chicago | SEKERCIOGLU TEZCAN,GÜLSÖZ Alper,KOVAN Volkan,ÖZENÇ Murat Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. (2008): 1 - 81. |
| MLA | SEKERCIOGLU TEZCAN,GÜLSÖZ Alper,KOVAN Volkan,ÖZENÇ Murat Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. , 2008, ss.1 - 81. |
| AMA | SEKERCIOGLU T,GÜLSÖZ A,KOVAN V,ÖZENÇ M Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. . 2008; 1 - 81. |
| Vancouver | SEKERCIOGLU T,GÜLSÖZ A,KOVAN V,ÖZENÇ M Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. . 2008; 1 - 81. |
| IEEE | SEKERCIOGLU T,GÜLSÖZ A,KOVAN V,ÖZENÇ M "Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi." , ss.1 - 81, 2008. |
| ISNAD | SEKERCIOGLU, TEZCAN vd. "Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi". (2008), 1-81. |
| APA | SEKERCIOGLU T, GÜLSÖZ A, KOVAN V, ÖZENÇ M (2008). Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. , 1 - 81. |
| Chicago | SEKERCIOGLU TEZCAN,GÜLSÖZ Alper,KOVAN Volkan,ÖZENÇ Murat Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. (2008): 1 - 81. |
| MLA | SEKERCIOGLU TEZCAN,GÜLSÖZ Alper,KOVAN Volkan,ÖZENÇ Murat Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. , 2008, ss.1 - 81. |
| AMA | SEKERCIOGLU T,GÜLSÖZ A,KOVAN V,ÖZENÇ M Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. . 2008; 1 - 81. |
| Vancouver | SEKERCIOGLU T,GÜLSÖZ A,KOVAN V,ÖZENÇ M Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi. . 2008; 1 - 81. |
| IEEE | SEKERCIOGLU T,GÜLSÖZ A,KOVAN V,ÖZENÇ M "Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi." , ss.1 - 81, 2008. |
| ISNAD | SEKERCIOGLU, TEZCAN vd. "Dinamik ve darbeli yükler altında yapıştırma bağlantılarının mukavemetini etkileyen faktörlerin incelenmesi". (2008), 1-81. |
