Yıl: 2006 Cilt: 21 Sayı: 4 Sayfa Aralığı: 675 - 680 Metin Dili: Türkçe İndeks Tarihi: 29-07-2022

Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması

Öz:
Bu çalışmada, pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özellikleri araştırılmıştır. Çalışmada CEM I 42,5 N sınıfı çimento kullanılmış olup mineral katkı olarak kullanılan silis dumanı (SD) %10 ve uçucu kül (UK) %30 oranlarında çimento ile ağırlıkça yer değiştirilmiştir. Kullanılan katkılarla birlikte hazırlanan 3, 7, 14, 28 ve 90 günlük numunelere basınç, yarmada çekme dayanımı ve ultrasonik test deneyleri uygulanmıştır. Elde edilen sonuçlara göre silis dumanı katkılı beton numunelerin her yaşta daha iyi dayanım özellikleri sergilediği görülmüştür. Kontrol betonu olarak hazırlanan numuneler ilk yaşlarda silis dumanı katkılı beton numunelerle benzer özellikler sergilerken uçucu kül katkılı beton serilerinde erken yaşlarda belirgin bir artış gözlenmemiştir. Bununla birlikte UK beton serisi ileri yaşlarda (90 gün) kontrol betonuna daha yakın sonuçlar vermiştir.
Anahtar Kelime:

The investigation of the mechnanical properties of structural lightweight concrete produced with pumice and mineral admixtures

Öz:
This paper reports an experimental investigation carried out to evaluate the mechanical properties of structural lightweight concrete produced with pumice and mineral admixtures. CEM I 42,5 N cement used in the study was partially replaced with silica fume (SD) 10% and fly ash (UK) 30% by weight, respectively. The tests of compressive strength, split tensile strength and ultrasonic pulse velocity were performed in the specimens prepared with mineral admixtures at ages of 3, 7, 14, 28 and 90 days. From the results it was seen that specimens prepared with silica fume showed better strength properties than other test specimens. While control concrete specimens showed similar strength properties to concrete specimens with silica fume admixture at early ages those of concrete specimens with fly ash admixture did not increase at early ages. Furthermore, UK concrete series gave very close results to control concrete at advanced ages (90 days).
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • 1. Haque, M.N., Al-Khaiat, H., Kayali, O., “Strength and Durability of Lightweight Concrete”, Cement and Concrete Composites, No. 26, 307-314, 2004. 2. Kok, S.C., Min-Hong, Z., “Water Permeability and Chloride Penetrability of High-Strength Lightweight Aggregate Concrete”, Cement and Concrete Research, No. 32, 639-645, 2002. 3. Sari, D., Paşamehmetoğlu, A.G., “The Effects of Gradation and Admixture on the Pumice Lightweight Aggregate Concrete”, Cement And Concrete Research, No. 35(5), 936-942, 2005. 4. Mindess, S., Young, J. F., Concrete, Englewood Cliffs, NJ: Prentice Hall, 1981. 5. Giaccio, G., Rocco, C., Violini, D., Zappitelli J., Zerbino, R., “High-Strength Concrete Incorporating Different Coarse Aggregates”, ACI Matter, No. 89(3), 242-246, 1992. 6. Baalbaki, W., Benmokrance, B., Chaallal, O., Aitcin, P.C., “Influence of Coarse Aggregates on Elastic Properties of High Performance Concrete”, ACI Matter, No 88(5), 499-503, 1991. 7. Nilsen, A.U., Monteiro, J.M., Gjorv, O.E., “Estimation of the Elastic Modulus of Lightweight Aggregate”, Cement And Concrete Research, No. 25(2), 276-280, 1995. 8. Yang, C.C., Huang, R, “A Two-Phase Model for Predicting the Compresive Strength of Concrete”, Cement And Concrete Research, No. 26(10), 1567-1577, 1996. 9. Lydon, F.D., Concrete Mix Design, Applied Science Publishers, 2nd ed., London, 1982. 10. Topcu, İ.B., “Semi-Lightweight Concretes Produced by Volcanic Slags”, Cement And Concrete Research, No. 27, 15-21, 1997. 11. Al-Khaiat, H., Haque, M.N., “Effect of Initial Curing on Early Strength and Physical Properties of Lightweight Concrete”, Cement And Concrete Research, No. 28, 859-866, 1998. 12. Yasar, E., Atis, C. D., Kilic, A., Gulsen, H., “Strength Properties of Lightweight Concrete Made with Basaltic Pumice and Fly Ash”, Materials Letters, No. 57, 2267-2270, 2003. 13. Erdoğan, T .Y., Beton, ODTÜ Geliştirme Vakfı Yayıncılık ve İletişim A.Ş. Yayını, Ankara, 2003. 14. ASTM C 597, “Standart Test Method For Pulse Velocity Through Concrete”, Annual Book of ASTM Standards, 1994. 15. TS EN 12390-3, “Beton-sertleşmiş Beton Deneyleri -Bölüm 3: Deney Numunelerinde Basınç Dayanımının Tayini”, TSE, Ankara, 2003. 16. TS EN 12390-6, “Beton-Sertleşmiş Beton Deneyleri -Bölüm 6: Deney Numunelerinin Yarmada Çekme Dayanımının Tayini”, TSE, Ankara, 2002. 17. Tasdemir, C., “Combined Effects of Mineral Admixtures and Curing Conditions on the Sorptivity Coefficient of Concrete”, Cement And Concrete Research, No 33, 1637–1642, 2003. 18. Fly Ash Facts for Highway Engineers Chapter 3 - Fly Ash in Portland Cement Concrete (http://www.fhwa.dot.gov/pavement/recycling/fach03.cfm) 19. Almussalam, A.A., Beshr, H., Maslehuddin, M., Al-Moudi, O.S.B., “Effect of Silica Fume on the Mechanical Properties of Low Quality Coarse Aggregate Concrete”, Cement and Concrete Composites, No 26, 891-900, 2004. 20. Khatri, R.P., Sirivivathnanon V., “Effect of Different Supplementary Cementitious Materials on Mechanical Properties of High Performance Concrete”, Cement Concrete Research, No 25(1), 209-220, 1995. 21. Tokyay, M., Erdoğdu, K., Uçucu Küllerin Karakterizasyonu, Türkiye Çimento Müstahsilleri Birliği, 1998. 22. TS 639, “Uçucu Küller”, TSE, Ankara, 1975. 23. ASTM C 618, “Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Portland Cement Concrete”, Annual Book of ASTM Standards, 1994. 24. Zaina, M.F.M., Mahmud H.B., Ilham A., Faizal, M., “Prediction of Splitting Tensile Strength of High-Performance Concrete”, Cement and Concrete Research, No. 32, 1251–1258, 2002.
APA YAZICIOGLU S, BOZKURT N (2006). Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. , 675 - 680.
Chicago YAZICIOGLU SALIH,BOZKURT NUSRET Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. (2006): 675 - 680.
MLA YAZICIOGLU SALIH,BOZKURT NUSRET Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. , 2006, ss.675 - 680.
AMA YAZICIOGLU S,BOZKURT N Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. . 2006; 675 - 680.
Vancouver YAZICIOGLU S,BOZKURT N Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. . 2006; 675 - 680.
IEEE YAZICIOGLU S,BOZKURT N "Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması." , ss.675 - 680, 2006.
ISNAD YAZICIOGLU, SALIH - BOZKURT, NUSRET. "Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması". (2006), 675-680.
APA YAZICIOGLU S, BOZKURT N (2006). Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 21(4), 675 - 680.
Chicago YAZICIOGLU SALIH,BOZKURT NUSRET Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 21, no.4 (2006): 675 - 680.
MLA YAZICIOGLU SALIH,BOZKURT NUSRET Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol.21, no.4, 2006, ss.675 - 680.
AMA YAZICIOGLU S,BOZKURT N Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi. 2006; 21(4): 675 - 680.
Vancouver YAZICIOGLU S,BOZKURT N Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi. 2006; 21(4): 675 - 680.
IEEE YAZICIOGLU S,BOZKURT N "Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması." Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 21, ss.675 - 680, 2006.
ISNAD YAZICIOGLU, SALIH - BOZKURT, NUSRET. "Pomza ve mineral katkılı taşıyıcı hafif betonun mekanik özelliklerinin araştırılması". Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 21/4 (2006), 675-680.